...
\n * ```\n *\n * ### Using an inline function\n * The `transition` animation method also supports reading an inline function which can decide\n * if its associated animation should be run.\n *\n * ```typescript\n * // this method is run each time the `myAnimationTrigger` trigger value changes.\n * function myInlineMatcherFn(fromState: string, toState: string, element: any, params: {[key:\n string]: any}): boolean {\n * // notice that `element` and `params` are also available here\n * return toState == 'yes-please-animate';\n * }\n *\n * @Component({\n * selector: 'my-component',\n * templateUrl: 'my-component-tpl.html',\n * animations: [\n * trigger('myAnimationTrigger', [\n * transition(myInlineMatcherFn, [\n * // the animation sequence code\n * ]),\n * ])\n * ]\n * })\n * class MyComponent {\n * myStatusExp = \"yes-please-animate\";\n * }\n * ```\n *\n * ### Disabling Animations\n * When true, the special animation control binding `@.disabled` binding prevents\n * all animations from rendering.\n * Place the `@.disabled` binding on an element to disable\n * animations on the element itself, as well as any inner animation triggers\n * within the element.\n *\n * The following example shows how to use this feature:\n *\n * ```typescript\n * @Component({\n * selector: 'my-component',\n * template: `\n * \n *\n * Be careful about entering end leaving elements as their transitions present a common\n * pitfall for developers.\n *\n * Note that when an element with a trigger enters the DOM its `:enter` transition always\n * gets executed, but its `:leave` transition will not be executed if the element is removed\n * alongside its parent (as it will be removed \"without warning\" before its transition has\n * a chance to be executed, the only way that such transition can occur is if the element\n * is exiting the DOM on its own).\n *\n *\n *
\n *\n * ### Animating to a Final State\n *\n * If the final step in a transition is a call to `animate()` that uses a timing value\n * with no `style` data, that step is automatically considered the final animation arc,\n * for the element to reach the final state, in such case Angular automatically adds or removes\n * CSS styles to ensure that the element is in the correct final state.\n *\n *\n * ### Usage Examples\n *\n * - Transition animations applied based on\n * the trigger's expression value\n *\n * ```HTML\n * \n *\n * Note that elements will be successfully queried via `:enter`/`:leave` even if their\n * insertion/removal is not done manually via `ViewContainerRef`or caused by their structural\n * directive (e.g. they enter/exit alongside their parent).\n *\n *
\n *\n * \n *\n * There is an exception to what previously mentioned, besides elements entering/leaving based on\n * their own logic, elements with an animation trigger can always be queried via `:leave` when\n * their parent is also leaving.\n *\n *
\n *\n * ### Usage Example\n *\n * The following example queries for inner elements and animates them\n * individually using `animate()`.\n *\n * ```typescript\n * @Component({\n * selector: 'inner',\n * template: `\n * `\n // and attach a portal programmatically in the parent component. When Angular does the first CD\n // round, it will fire the setter with empty string, causing the user's content to be cleared.\n if (this.hasAttached() && !portal && !this._isInitialized) {\n return;\n }\n if (this.hasAttached()) {\n super.detach();\n }\n if (portal) {\n super.attach(portal);\n }\n this._attachedPortal = portal || null;\n }\n /** Component or view reference that is attached to the portal. */\n get attachedRef() {\n return this._attachedRef;\n }\n ngOnInit() {\n this._isInitialized = true;\n }\n ngOnDestroy() {\n super.dispose();\n this._attachedRef = this._attachedPortal = null;\n }\n /**\n * Attach the given ComponentPortal to this PortalOutlet using the ComponentFactoryResolver.\n *\n * @param portal Portal to be attached to the portal outlet.\n * @returns Reference to the created component.\n */\n attachComponentPortal(portal) {\n portal.setAttachedHost(this);\n // If the portal specifies an origin, use that as the logical location of the component\n // in the application tree. Otherwise use the location of this PortalOutlet.\n const viewContainerRef = portal.viewContainerRef != null ? portal.viewContainerRef : this._viewContainerRef;\n const resolver = portal.componentFactoryResolver || this._componentFactoryResolver;\n const componentFactory = resolver.resolveComponentFactory(portal.component);\n const ref = viewContainerRef.createComponent(componentFactory, viewContainerRef.length, portal.injector || viewContainerRef.injector, portal.projectableNodes || undefined);\n // If we're using a view container that's different from the injected one (e.g. when the portal\n // specifies its own) we need to move the component into the outlet, otherwise it'll be rendered\n // inside of the alternate view container.\n if (viewContainerRef !== this._viewContainerRef) {\n this._getRootNode().appendChild(ref.hostView.rootNodes[0]);\n }\n super.setDisposeFn(() => ref.destroy());\n this._attachedPortal = portal;\n this._attachedRef = ref;\n this.attached.emit(ref);\n return ref;\n }\n /**\n * Attach the given TemplatePortal to this PortalHost as an embedded View.\n * @param portal Portal to be attached.\n * @returns Reference to the created embedded view.\n */\n attachTemplatePortal(portal) {\n portal.setAttachedHost(this);\n const viewRef = this._viewContainerRef.createEmbeddedView(portal.templateRef, portal.context, {\n injector: portal.injector,\n });\n super.setDisposeFn(() => this._viewContainerRef.clear());\n this._attachedPortal = portal;\n this._attachedRef = viewRef;\n this.attached.emit(viewRef);\n return viewRef;\n }\n /** Gets the root node of the portal outlet. */\n _getRootNode() {\n const nativeElement = this._viewContainerRef.element.nativeElement;\n // The directive could be set on a template which will result in a comment\n // node being the root. Use the comment's parent node if that is the case.\n return (nativeElement.nodeType === nativeElement.ELEMENT_NODE\n ? nativeElement\n : nativeElement.parentNode);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkPortalOutlet, deps: [{ token: i0.ComponentFactoryResolver }, { token: i0.ViewContainerRef }, { token: DOCUMENT }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkPortalOutlet, selector: \"[cdkPortalOutlet]\", inputs: { portal: [\"cdkPortalOutlet\", \"portal\"] }, outputs: { attached: \"attached\" }, exportAs: [\"cdkPortalOutlet\"], usesInheritance: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkPortalOutlet, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkPortalOutlet]',\n exportAs: 'cdkPortalOutlet',\n inputs: ['portal: cdkPortalOutlet'],\n }]\n }], ctorParameters: function () { return [{ type: i0.ComponentFactoryResolver }, { type: i0.ViewContainerRef }, { type: undefined, decorators: [{\n type: Inject,\n args: [DOCUMENT]\n }] }]; }, propDecorators: { attached: [{\n type: Output\n }] } });\n/**\n * @deprecated Use `CdkPortalOutlet` instead.\n * @breaking-change 9.0.0\n */\nclass PortalHostDirective extends CdkPortalOutlet {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: PortalHostDirective, deps: null, target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: PortalHostDirective, selector: \"[cdkPortalHost], [portalHost]\", inputs: { portal: [\"cdkPortalHost\", \"portal\"] }, providers: [\n {\n provide: CdkPortalOutlet,\n useExisting: PortalHostDirective,\n },\n ], exportAs: [\"cdkPortalHost\"], usesInheritance: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: PortalHostDirective, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkPortalHost], [portalHost]',\n exportAs: 'cdkPortalHost',\n inputs: ['portal: cdkPortalHost'],\n providers: [\n {\n provide: CdkPortalOutlet,\n useExisting: PortalHostDirective,\n },\n ],\n }]\n }] });\nclass PortalModule {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: PortalModule, deps: [], target: i0.ɵɵFactoryTarget.NgModule }); }\n static { this.ɵmod = i0.ɵɵngDeclareNgModule({ minVersion: \"14.0.0\", version: \"16.0.0\", ngImport: i0, type: PortalModule, declarations: [CdkPortal, CdkPortalOutlet, TemplatePortalDirective, PortalHostDirective], exports: [CdkPortal, CdkPortalOutlet, TemplatePortalDirective, PortalHostDirective] }); }\n static { this.ɵinj = i0.ɵɵngDeclareInjector({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: PortalModule }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: PortalModule, decorators: [{\n type: NgModule,\n args: [{\n exports: [CdkPortal, CdkPortalOutlet, TemplatePortalDirective, PortalHostDirective],\n declarations: [CdkPortal, CdkPortalOutlet, TemplatePortalDirective, PortalHostDirective],\n }]\n }] });\n\n/**\n * Custom injector to be used when providing custom\n * injection tokens to components inside a portal.\n * @docs-private\n * @deprecated Use `Injector.create` instead.\n * @breaking-change 11.0.0\n */\nclass PortalInjector {\n constructor(_parentInjector, _customTokens) {\n this._parentInjector = _parentInjector;\n this._customTokens = _customTokens;\n }\n get(token, notFoundValue) {\n const value = this._customTokens.get(token);\n if (typeof value !== 'undefined') {\n return value;\n }\n return this._parentInjector.get(token, notFoundValue);\n }\n}\n\n/**\n * Generated bundle index. Do not edit.\n */\n\nexport { BasePortalHost, BasePortalOutlet, CdkPortal, CdkPortalOutlet, ComponentPortal, DomPortal, DomPortalHost, DomPortalOutlet, Portal, PortalHostDirective, PortalInjector, PortalModule, TemplatePortal, TemplatePortalDirective };\n","import { coerceNumberProperty, coerceElement, coerceBooleanProperty } from '@angular/cdk/coercion';\nimport * as i0 from '@angular/core';\nimport { InjectionToken, forwardRef, Directive, Input, Injectable, Optional, Inject, inject, Component, ViewEncapsulation, ChangeDetectionStrategy, Output, ViewChild, SkipSelf, ElementRef, NgModule } from '@angular/core';\nimport { Subject, of, Observable, fromEvent, animationFrameScheduler, asapScheduler, Subscription, isObservable } from 'rxjs';\nimport { distinctUntilChanged, auditTime, filter, takeUntil, startWith, pairwise, switchMap, shareReplay } from 'rxjs/operators';\nimport * as i1 from '@angular/cdk/platform';\nimport { getRtlScrollAxisType, supportsScrollBehavior, Platform } from '@angular/cdk/platform';\nimport { DOCUMENT } from '@angular/common';\nimport * as i2 from '@angular/cdk/bidi';\nimport { BidiModule } from '@angular/cdk/bidi';\nimport * as i2$1 from '@angular/cdk/collections';\nimport { isDataSource, ArrayDataSource, _VIEW_REPEATER_STRATEGY, _RecycleViewRepeaterStrategy } from '@angular/cdk/collections';\n\n/** The injection token used to specify the virtual scrolling strategy. */\nconst VIRTUAL_SCROLL_STRATEGY = new InjectionToken('VIRTUAL_SCROLL_STRATEGY');\n\n/** Virtual scrolling strategy for lists with items of known fixed size. */\nclass FixedSizeVirtualScrollStrategy {\n /**\n * @param itemSize The size of the items in the virtually scrolling list.\n * @param minBufferPx The minimum amount of buffer (in pixels) before needing to render more\n * @param maxBufferPx The amount of buffer (in pixels) to render when rendering more.\n */\n constructor(itemSize, minBufferPx, maxBufferPx) {\n this._scrolledIndexChange = new Subject();\n /** @docs-private Implemented as part of VirtualScrollStrategy. */\n this.scrolledIndexChange = this._scrolledIndexChange.pipe(distinctUntilChanged());\n /** The attached viewport. */\n this._viewport = null;\n this._itemSize = itemSize;\n this._minBufferPx = minBufferPx;\n this._maxBufferPx = maxBufferPx;\n }\n /**\n * Attaches this scroll strategy to a viewport.\n * @param viewport The viewport to attach this strategy to.\n */\n attach(viewport) {\n this._viewport = viewport;\n this._updateTotalContentSize();\n this._updateRenderedRange();\n }\n /** Detaches this scroll strategy from the currently attached viewport. */\n detach() {\n this._scrolledIndexChange.complete();\n this._viewport = null;\n }\n /**\n * Update the item size and buffer size.\n * @param itemSize The size of the items in the virtually scrolling list.\n * @param minBufferPx The minimum amount of buffer (in pixels) before needing to render more\n * @param maxBufferPx The amount of buffer (in pixels) to render when rendering more.\n */\n updateItemAndBufferSize(itemSize, minBufferPx, maxBufferPx) {\n if (maxBufferPx < minBufferPx && (typeof ngDevMode === 'undefined' || ngDevMode)) {\n throw Error('CDK virtual scroll: maxBufferPx must be greater than or equal to minBufferPx');\n }\n this._itemSize = itemSize;\n this._minBufferPx = minBufferPx;\n this._maxBufferPx = maxBufferPx;\n this._updateTotalContentSize();\n this._updateRenderedRange();\n }\n /** @docs-private Implemented as part of VirtualScrollStrategy. */\n onContentScrolled() {\n this._updateRenderedRange();\n }\n /** @docs-private Implemented as part of VirtualScrollStrategy. */\n onDataLengthChanged() {\n this._updateTotalContentSize();\n this._updateRenderedRange();\n }\n /** @docs-private Implemented as part of VirtualScrollStrategy. */\n onContentRendered() {\n /* no-op */\n }\n /** @docs-private Implemented as part of VirtualScrollStrategy. */\n onRenderedOffsetChanged() {\n /* no-op */\n }\n /**\n * Scroll to the offset for the given index.\n * @param index The index of the element to scroll to.\n * @param behavior The ScrollBehavior to use when scrolling.\n */\n scrollToIndex(index, behavior) {\n if (this._viewport) {\n this._viewport.scrollToOffset(index * this._itemSize, behavior);\n }\n }\n /** Update the viewport's total content size. */\n _updateTotalContentSize() {\n if (!this._viewport) {\n return;\n }\n this._viewport.setTotalContentSize(this._viewport.getDataLength() * this._itemSize);\n }\n /** Update the viewport's rendered range. */\n _updateRenderedRange() {\n if (!this._viewport) {\n return;\n }\n const renderedRange = this._viewport.getRenderedRange();\n const newRange = { start: renderedRange.start, end: renderedRange.end };\n const viewportSize = this._viewport.getViewportSize();\n const dataLength = this._viewport.getDataLength();\n let scrollOffset = this._viewport.measureScrollOffset();\n // Prevent NaN as result when dividing by zero.\n let firstVisibleIndex = this._itemSize > 0 ? scrollOffset / this._itemSize : 0;\n // If user scrolls to the bottom of the list and data changes to a smaller list\n if (newRange.end > dataLength) {\n // We have to recalculate the first visible index based on new data length and viewport size.\n const maxVisibleItems = Math.ceil(viewportSize / this._itemSize);\n const newVisibleIndex = Math.max(0, Math.min(firstVisibleIndex, dataLength - maxVisibleItems));\n // If first visible index changed we must update scroll offset to handle start/end buffers\n // Current range must also be adjusted to cover the new position (bottom of new list).\n if (firstVisibleIndex != newVisibleIndex) {\n firstVisibleIndex = newVisibleIndex;\n scrollOffset = newVisibleIndex * this._itemSize;\n newRange.start = Math.floor(firstVisibleIndex);\n }\n newRange.end = Math.max(0, Math.min(dataLength, newRange.start + maxVisibleItems));\n }\n const startBuffer = scrollOffset - newRange.start * this._itemSize;\n if (startBuffer < this._minBufferPx && newRange.start != 0) {\n const expandStart = Math.ceil((this._maxBufferPx - startBuffer) / this._itemSize);\n newRange.start = Math.max(0, newRange.start - expandStart);\n newRange.end = Math.min(dataLength, Math.ceil(firstVisibleIndex + (viewportSize + this._minBufferPx) / this._itemSize));\n }\n else {\n const endBuffer = newRange.end * this._itemSize - (scrollOffset + viewportSize);\n if (endBuffer < this._minBufferPx && newRange.end != dataLength) {\n const expandEnd = Math.ceil((this._maxBufferPx - endBuffer) / this._itemSize);\n if (expandEnd > 0) {\n newRange.end = Math.min(dataLength, newRange.end + expandEnd);\n newRange.start = Math.max(0, Math.floor(firstVisibleIndex - this._minBufferPx / this._itemSize));\n }\n }\n }\n this._viewport.setRenderedRange(newRange);\n this._viewport.setRenderedContentOffset(this._itemSize * newRange.start);\n this._scrolledIndexChange.next(Math.floor(firstVisibleIndex));\n }\n}\n/**\n * Provider factory for `FixedSizeVirtualScrollStrategy` that simply extracts the already created\n * `FixedSizeVirtualScrollStrategy` from the given directive.\n * @param fixedSizeDir The instance of `CdkFixedSizeVirtualScroll` to extract the\n * `FixedSizeVirtualScrollStrategy` from.\n */\nfunction _fixedSizeVirtualScrollStrategyFactory(fixedSizeDir) {\n return fixedSizeDir._scrollStrategy;\n}\n/** A virtual scroll strategy that supports fixed-size items. */\nclass CdkFixedSizeVirtualScroll {\n constructor() {\n this._itemSize = 20;\n this._minBufferPx = 100;\n this._maxBufferPx = 200;\n /** The scroll strategy used by this directive. */\n this._scrollStrategy = new FixedSizeVirtualScrollStrategy(this.itemSize, this.minBufferPx, this.maxBufferPx);\n }\n /** The size of the items in the list (in pixels). */\n get itemSize() {\n return this._itemSize;\n }\n set itemSize(value) {\n this._itemSize = coerceNumberProperty(value);\n }\n /**\n * The minimum amount of buffer rendered beyond the viewport (in pixels).\n * If the amount of buffer dips below this number, more items will be rendered. Defaults to 100px.\n */\n get minBufferPx() {\n return this._minBufferPx;\n }\n set minBufferPx(value) {\n this._minBufferPx = coerceNumberProperty(value);\n }\n /**\n * The number of pixels worth of buffer to render for when rendering new items. Defaults to 200px.\n */\n get maxBufferPx() {\n return this._maxBufferPx;\n }\n set maxBufferPx(value) {\n this._maxBufferPx = coerceNumberProperty(value);\n }\n ngOnChanges() {\n this._scrollStrategy.updateItemAndBufferSize(this.itemSize, this.minBufferPx, this.maxBufferPx);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkFixedSizeVirtualScroll, deps: [], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkFixedSizeVirtualScroll, isStandalone: true, selector: \"cdk-virtual-scroll-viewport[itemSize]\", inputs: { itemSize: \"itemSize\", minBufferPx: \"minBufferPx\", maxBufferPx: \"maxBufferPx\" }, providers: [\n {\n provide: VIRTUAL_SCROLL_STRATEGY,\n useFactory: _fixedSizeVirtualScrollStrategyFactory,\n deps: [forwardRef(() => CdkFixedSizeVirtualScroll)],\n },\n ], usesOnChanges: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkFixedSizeVirtualScroll, decorators: [{\n type: Directive,\n args: [{\n selector: 'cdk-virtual-scroll-viewport[itemSize]',\n standalone: true,\n providers: [\n {\n provide: VIRTUAL_SCROLL_STRATEGY,\n useFactory: _fixedSizeVirtualScrollStrategyFactory,\n deps: [forwardRef(() => CdkFixedSizeVirtualScroll)],\n },\n ],\n }]\n }], propDecorators: { itemSize: [{\n type: Input\n }], minBufferPx: [{\n type: Input\n }], maxBufferPx: [{\n type: Input\n }] } });\n\n/** Time in ms to throttle the scrolling events by default. */\nconst DEFAULT_SCROLL_TIME = 20;\n/**\n * Service contained all registered Scrollable references and emits an event when any one of the\n * Scrollable references emit a scrolled event.\n */\nclass ScrollDispatcher {\n constructor(_ngZone, _platform, document) {\n this._ngZone = _ngZone;\n this._platform = _platform;\n /** Subject for notifying that a registered scrollable reference element has been scrolled. */\n this._scrolled = new Subject();\n /** Keeps track of the global `scroll` and `resize` subscriptions. */\n this._globalSubscription = null;\n /** Keeps track of the amount of subscriptions to `scrolled`. Used for cleaning up afterwards. */\n this._scrolledCount = 0;\n /**\n * Map of all the scrollable references that are registered with the service and their\n * scroll event subscriptions.\n */\n this.scrollContainers = new Map();\n this._document = document;\n }\n /**\n * Registers a scrollable instance with the service and listens for its scrolled events. When the\n * scrollable is scrolled, the service emits the event to its scrolled observable.\n * @param scrollable Scrollable instance to be registered.\n */\n register(scrollable) {\n if (!this.scrollContainers.has(scrollable)) {\n this.scrollContainers.set(scrollable, scrollable.elementScrolled().subscribe(() => this._scrolled.next(scrollable)));\n }\n }\n /**\n * De-registers a Scrollable reference and unsubscribes from its scroll event observable.\n * @param scrollable Scrollable instance to be deregistered.\n */\n deregister(scrollable) {\n const scrollableReference = this.scrollContainers.get(scrollable);\n if (scrollableReference) {\n scrollableReference.unsubscribe();\n this.scrollContainers.delete(scrollable);\n }\n }\n /**\n * Returns an observable that emits an event whenever any of the registered Scrollable\n * references (or window, document, or body) fire a scrolled event. Can provide a time in ms\n * to override the default \"throttle\" time.\n *\n * **Note:** in order to avoid hitting change detection for every scroll event,\n * all of the events emitted from this stream will be run outside the Angular zone.\n * If you need to update any data bindings as a result of a scroll event, you have\n * to run the callback using `NgZone.run`.\n */\n scrolled(auditTimeInMs = DEFAULT_SCROLL_TIME) {\n if (!this._platform.isBrowser) {\n return of();\n }\n return new Observable((observer) => {\n if (!this._globalSubscription) {\n this._addGlobalListener();\n }\n // In the case of a 0ms delay, use an observable without auditTime\n // since it does add a perceptible delay in processing overhead.\n const subscription = auditTimeInMs > 0\n ? this._scrolled.pipe(auditTime(auditTimeInMs)).subscribe(observer)\n : this._scrolled.subscribe(observer);\n this._scrolledCount++;\n return () => {\n subscription.unsubscribe();\n this._scrolledCount--;\n if (!this._scrolledCount) {\n this._removeGlobalListener();\n }\n };\n });\n }\n ngOnDestroy() {\n this._removeGlobalListener();\n this.scrollContainers.forEach((_, container) => this.deregister(container));\n this._scrolled.complete();\n }\n /**\n * Returns an observable that emits whenever any of the\n * scrollable ancestors of an element are scrolled.\n * @param elementOrElementRef Element whose ancestors to listen for.\n * @param auditTimeInMs Time to throttle the scroll events.\n */\n ancestorScrolled(elementOrElementRef, auditTimeInMs) {\n const ancestors = this.getAncestorScrollContainers(elementOrElementRef);\n return this.scrolled(auditTimeInMs).pipe(filter(target => {\n return !target || ancestors.indexOf(target) > -1;\n }));\n }\n /** Returns all registered Scrollables that contain the provided element. */\n getAncestorScrollContainers(elementOrElementRef) {\n const scrollingContainers = [];\n this.scrollContainers.forEach((_subscription, scrollable) => {\n if (this._scrollableContainsElement(scrollable, elementOrElementRef)) {\n scrollingContainers.push(scrollable);\n }\n });\n return scrollingContainers;\n }\n /** Use defaultView of injected document if available or fallback to global window reference */\n _getWindow() {\n return this._document.defaultView || window;\n }\n /** Returns true if the element is contained within the provided Scrollable. */\n _scrollableContainsElement(scrollable, elementOrElementRef) {\n let element = coerceElement(elementOrElementRef);\n let scrollableElement = scrollable.getElementRef().nativeElement;\n // Traverse through the element parents until we reach null, checking if any of the elements\n // are the scrollable's element.\n do {\n if (element == scrollableElement) {\n return true;\n }\n } while ((element = element.parentElement));\n return false;\n }\n /** Sets up the global scroll listeners. */\n _addGlobalListener() {\n this._globalSubscription = this._ngZone.runOutsideAngular(() => {\n const window = this._getWindow();\n return fromEvent(window.document, 'scroll').subscribe(() => this._scrolled.next());\n });\n }\n /** Cleans up the global scroll listener. */\n _removeGlobalListener() {\n if (this._globalSubscription) {\n this._globalSubscription.unsubscribe();\n this._globalSubscription = null;\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ScrollDispatcher, deps: [{ token: i0.NgZone }, { token: i1.Platform }, { token: DOCUMENT, optional: true }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ScrollDispatcher, providedIn: 'root' }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ScrollDispatcher, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root' }]\n }], ctorParameters: function () { return [{ type: i0.NgZone }, { type: i1.Platform }, { type: undefined, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [DOCUMENT]\n }] }]; } });\n\n/**\n * Sends an event when the directive's element is scrolled. Registers itself with the\n * ScrollDispatcher service to include itself as part of its collection of scrolling events that it\n * can be listened to through the service.\n */\nclass CdkScrollable {\n constructor(elementRef, scrollDispatcher, ngZone, dir) {\n this.elementRef = elementRef;\n this.scrollDispatcher = scrollDispatcher;\n this.ngZone = ngZone;\n this.dir = dir;\n this._destroyed = new Subject();\n this._elementScrolled = new Observable((observer) => this.ngZone.runOutsideAngular(() => fromEvent(this.elementRef.nativeElement, 'scroll')\n .pipe(takeUntil(this._destroyed))\n .subscribe(observer)));\n }\n ngOnInit() {\n this.scrollDispatcher.register(this);\n }\n ngOnDestroy() {\n this.scrollDispatcher.deregister(this);\n this._destroyed.next();\n this._destroyed.complete();\n }\n /** Returns observable that emits when a scroll event is fired on the host element. */\n elementScrolled() {\n return this._elementScrolled;\n }\n /** Gets the ElementRef for the viewport. */\n getElementRef() {\n return this.elementRef;\n }\n /**\n * Scrolls to the specified offsets. This is a normalized version of the browser's native scrollTo\n * method, since browsers are not consistent about what scrollLeft means in RTL. For this method\n * left and right always refer to the left and right side of the scrolling container irrespective\n * of the layout direction. start and end refer to left and right in an LTR context and vice-versa\n * in an RTL context.\n * @param options specified the offsets to scroll to.\n */\n scrollTo(options) {\n const el = this.elementRef.nativeElement;\n const isRtl = this.dir && this.dir.value == 'rtl';\n // Rewrite start & end offsets as right or left offsets.\n if (options.left == null) {\n options.left = isRtl ? options.end : options.start;\n }\n if (options.right == null) {\n options.right = isRtl ? options.start : options.end;\n }\n // Rewrite the bottom offset as a top offset.\n if (options.bottom != null) {\n options.top =\n el.scrollHeight - el.clientHeight - options.bottom;\n }\n // Rewrite the right offset as a left offset.\n if (isRtl && getRtlScrollAxisType() != 0 /* RtlScrollAxisType.NORMAL */) {\n if (options.left != null) {\n options.right =\n el.scrollWidth - el.clientWidth - options.left;\n }\n if (getRtlScrollAxisType() == 2 /* RtlScrollAxisType.INVERTED */) {\n options.left = options.right;\n }\n else if (getRtlScrollAxisType() == 1 /* RtlScrollAxisType.NEGATED */) {\n options.left = options.right ? -options.right : options.right;\n }\n }\n else {\n if (options.right != null) {\n options.left =\n el.scrollWidth - el.clientWidth - options.right;\n }\n }\n this._applyScrollToOptions(options);\n }\n _applyScrollToOptions(options) {\n const el = this.elementRef.nativeElement;\n if (supportsScrollBehavior()) {\n el.scrollTo(options);\n }\n else {\n if (options.top != null) {\n el.scrollTop = options.top;\n }\n if (options.left != null) {\n el.scrollLeft = options.left;\n }\n }\n }\n /**\n * Measures the scroll offset relative to the specified edge of the viewport. This method can be\n * used instead of directly checking scrollLeft or scrollTop, since browsers are not consistent\n * about what scrollLeft means in RTL. The values returned by this method are normalized such that\n * left and right always refer to the left and right side of the scrolling container irrespective\n * of the layout direction. start and end refer to left and right in an LTR context and vice-versa\n * in an RTL context.\n * @param from The edge to measure from.\n */\n measureScrollOffset(from) {\n const LEFT = 'left';\n const RIGHT = 'right';\n const el = this.elementRef.nativeElement;\n if (from == 'top') {\n return el.scrollTop;\n }\n if (from == 'bottom') {\n return el.scrollHeight - el.clientHeight - el.scrollTop;\n }\n // Rewrite start & end as left or right offsets.\n const isRtl = this.dir && this.dir.value == 'rtl';\n if (from == 'start') {\n from = isRtl ? RIGHT : LEFT;\n }\n else if (from == 'end') {\n from = isRtl ? LEFT : RIGHT;\n }\n if (isRtl && getRtlScrollAxisType() == 2 /* RtlScrollAxisType.INVERTED */) {\n // For INVERTED, scrollLeft is (scrollWidth - clientWidth) when scrolled all the way left and\n // 0 when scrolled all the way right.\n if (from == LEFT) {\n return el.scrollWidth - el.clientWidth - el.scrollLeft;\n }\n else {\n return el.scrollLeft;\n }\n }\n else if (isRtl && getRtlScrollAxisType() == 1 /* RtlScrollAxisType.NEGATED */) {\n // For NEGATED, scrollLeft is -(scrollWidth - clientWidth) when scrolled all the way left and\n // 0 when scrolled all the way right.\n if (from == LEFT) {\n return el.scrollLeft + el.scrollWidth - el.clientWidth;\n }\n else {\n return -el.scrollLeft;\n }\n }\n else {\n // For NORMAL, as well as non-RTL contexts, scrollLeft is 0 when scrolled all the way left and\n // (scrollWidth - clientWidth) when scrolled all the way right.\n if (from == LEFT) {\n return el.scrollLeft;\n }\n else {\n return el.scrollWidth - el.clientWidth - el.scrollLeft;\n }\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkScrollable, deps: [{ token: i0.ElementRef }, { token: ScrollDispatcher }, { token: i0.NgZone }, { token: i2.Directionality, optional: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkScrollable, isStandalone: true, selector: \"[cdk-scrollable], [cdkScrollable]\", ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkScrollable, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdk-scrollable], [cdkScrollable]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ElementRef }, { type: ScrollDispatcher }, { type: i0.NgZone }, { type: i2.Directionality, decorators: [{\n type: Optional\n }] }]; } });\n\n/** Time in ms to throttle the resize events by default. */\nconst DEFAULT_RESIZE_TIME = 20;\n/**\n * Simple utility for getting the bounds of the browser viewport.\n * @docs-private\n */\nclass ViewportRuler {\n constructor(_platform, ngZone, document) {\n this._platform = _platform;\n /** Stream of viewport change events. */\n this._change = new Subject();\n /** Event listener that will be used to handle the viewport change events. */\n this._changeListener = (event) => {\n this._change.next(event);\n };\n this._document = document;\n ngZone.runOutsideAngular(() => {\n if (_platform.isBrowser) {\n const window = this._getWindow();\n // Note that bind the events ourselves, rather than going through something like RxJS's\n // `fromEvent` so that we can ensure that they're bound outside of the NgZone.\n window.addEventListener('resize', this._changeListener);\n window.addEventListener('orientationchange', this._changeListener);\n }\n // Clear the cached position so that the viewport is re-measured next time it is required.\n // We don't need to keep track of the subscription, because it is completed on destroy.\n this.change().subscribe(() => (this._viewportSize = null));\n });\n }\n ngOnDestroy() {\n if (this._platform.isBrowser) {\n const window = this._getWindow();\n window.removeEventListener('resize', this._changeListener);\n window.removeEventListener('orientationchange', this._changeListener);\n }\n this._change.complete();\n }\n /** Returns the viewport's width and height. */\n getViewportSize() {\n if (!this._viewportSize) {\n this._updateViewportSize();\n }\n const output = { width: this._viewportSize.width, height: this._viewportSize.height };\n // If we're not on a browser, don't cache the size since it'll be mocked out anyway.\n if (!this._platform.isBrowser) {\n this._viewportSize = null;\n }\n return output;\n }\n /** Gets a ClientRect for the viewport's bounds. */\n getViewportRect() {\n // Use the document element's bounding rect rather than the window scroll properties\n // (e.g. pageYOffset, scrollY) due to in issue in Chrome and IE where window scroll\n // properties and client coordinates (boundingClientRect, clientX/Y, etc.) are in different\n // conceptual viewports. Under most circumstances these viewports are equivalent, but they\n // can disagree when the page is pinch-zoomed (on devices that support touch).\n // See https://bugs.chromium.org/p/chromium/issues/detail?id=489206#c4\n // We use the documentElement instead of the body because, by default (without a css reset)\n // browsers typically give the document body an 8px margin, which is not included in\n // getBoundingClientRect().\n const scrollPosition = this.getViewportScrollPosition();\n const { width, height } = this.getViewportSize();\n return {\n top: scrollPosition.top,\n left: scrollPosition.left,\n bottom: scrollPosition.top + height,\n right: scrollPosition.left + width,\n height,\n width,\n };\n }\n /** Gets the (top, left) scroll position of the viewport. */\n getViewportScrollPosition() {\n // While we can get a reference to the fake document\n // during SSR, it doesn't have getBoundingClientRect.\n if (!this._platform.isBrowser) {\n return { top: 0, left: 0 };\n }\n // The top-left-corner of the viewport is determined by the scroll position of the document\n // body, normally just (scrollLeft, scrollTop). However, Chrome and Firefox disagree about\n // whether `document.body` or `document.documentElement` is the scrolled element, so reading\n // `scrollTop` and `scrollLeft` is inconsistent. However, using the bounding rect of\n // `document.documentElement` works consistently, where the `top` and `left` values will\n // equal negative the scroll position.\n const document = this._document;\n const window = this._getWindow();\n const documentElement = document.documentElement;\n const documentRect = documentElement.getBoundingClientRect();\n const top = -documentRect.top ||\n document.body.scrollTop ||\n window.scrollY ||\n documentElement.scrollTop ||\n 0;\n const left = -documentRect.left ||\n document.body.scrollLeft ||\n window.scrollX ||\n documentElement.scrollLeft ||\n 0;\n return { top, left };\n }\n /**\n * Returns a stream that emits whenever the size of the viewport changes.\n * This stream emits outside of the Angular zone.\n * @param throttleTime Time in milliseconds to throttle the stream.\n */\n change(throttleTime = DEFAULT_RESIZE_TIME) {\n return throttleTime > 0 ? this._change.pipe(auditTime(throttleTime)) : this._change;\n }\n /** Use defaultView of injected document if available or fallback to global window reference */\n _getWindow() {\n return this._document.defaultView || window;\n }\n /** Updates the cached viewport size. */\n _updateViewportSize() {\n const window = this._getWindow();\n this._viewportSize = this._platform.isBrowser\n ? { width: window.innerWidth, height: window.innerHeight }\n : { width: 0, height: 0 };\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ViewportRuler, deps: [{ token: i1.Platform }, { token: i0.NgZone }, { token: DOCUMENT, optional: true }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ViewportRuler, providedIn: 'root' }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ViewportRuler, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root' }]\n }], ctorParameters: function () { return [{ type: i1.Platform }, { type: i0.NgZone }, { type: undefined, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [DOCUMENT]\n }] }]; } });\n\nconst VIRTUAL_SCROLLABLE = new InjectionToken('VIRTUAL_SCROLLABLE');\n/**\n * Extending the {@link CdkScrollable} to be used as scrolling container for virtual scrolling.\n */\nclass CdkVirtualScrollable extends CdkScrollable {\n constructor(elementRef, scrollDispatcher, ngZone, dir) {\n super(elementRef, scrollDispatcher, ngZone, dir);\n }\n /**\n * Measure the viewport size for the provided orientation.\n *\n * @param orientation The orientation to measure the size from.\n */\n measureViewportSize(orientation) {\n const viewportEl = this.elementRef.nativeElement;\n return orientation === 'horizontal' ? viewportEl.clientWidth : viewportEl.clientHeight;\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollable, deps: [{ token: i0.ElementRef }, { token: ScrollDispatcher }, { token: i0.NgZone }, { token: i2.Directionality, optional: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkVirtualScrollable, usesInheritance: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollable, decorators: [{\n type: Directive\n }], ctorParameters: function () { return [{ type: i0.ElementRef }, { type: ScrollDispatcher }, { type: i0.NgZone }, { type: i2.Directionality, decorators: [{\n type: Optional\n }] }]; } });\n\n/** Checks if the given ranges are equal. */\nfunction rangesEqual(r1, r2) {\n return r1.start == r2.start && r1.end == r2.end;\n}\n/**\n * Scheduler to be used for scroll events. Needs to fall back to\n * something that doesn't rely on requestAnimationFrame on environments\n * that don't support it (e.g. server-side rendering).\n */\nconst SCROLL_SCHEDULER = typeof requestAnimationFrame !== 'undefined' ? animationFrameScheduler : asapScheduler;\n/** A viewport that virtualizes its scrolling with the help of `CdkVirtualForOf`. */\nclass CdkVirtualScrollViewport extends CdkVirtualScrollable {\n /** The direction the viewport scrolls. */\n get orientation() {\n return this._orientation;\n }\n set orientation(orientation) {\n if (this._orientation !== orientation) {\n this._orientation = orientation;\n this._calculateSpacerSize();\n }\n }\n /**\n * Whether rendered items should persist in the DOM after scrolling out of view. By default, items\n * will be removed.\n */\n get appendOnly() {\n return this._appendOnly;\n }\n set appendOnly(value) {\n this._appendOnly = coerceBooleanProperty(value);\n }\n constructor(elementRef, _changeDetectorRef, ngZone, _scrollStrategy, dir, scrollDispatcher, viewportRuler, scrollable) {\n super(elementRef, scrollDispatcher, ngZone, dir);\n this.elementRef = elementRef;\n this._changeDetectorRef = _changeDetectorRef;\n this._scrollStrategy = _scrollStrategy;\n this.scrollable = scrollable;\n this._platform = inject(Platform);\n /** Emits when the viewport is detached from a CdkVirtualForOf. */\n this._detachedSubject = new Subject();\n /** Emits when the rendered range changes. */\n this._renderedRangeSubject = new Subject();\n this._orientation = 'vertical';\n this._appendOnly = false;\n // Note: we don't use the typical EventEmitter here because we need to subscribe to the scroll\n // strategy lazily (i.e. only if the user is actually listening to the events). We do this because\n // depending on how the strategy calculates the scrolled index, it may come at a cost to\n // performance.\n /** Emits when the index of the first element visible in the viewport changes. */\n this.scrolledIndexChange = new Observable((observer) => this._scrollStrategy.scrolledIndexChange.subscribe(index => Promise.resolve().then(() => this.ngZone.run(() => observer.next(index)))));\n /** A stream that emits whenever the rendered range changes. */\n this.renderedRangeStream = this._renderedRangeSubject;\n /**\n * The total size of all content (in pixels), including content that is not currently rendered.\n */\n this._totalContentSize = 0;\n /** A string representing the `style.width` property value to be used for the spacer element. */\n this._totalContentWidth = '';\n /** A string representing the `style.height` property value to be used for the spacer element. */\n this._totalContentHeight = '';\n /** The currently rendered range of indices. */\n this._renderedRange = { start: 0, end: 0 };\n /** The length of the data bound to this viewport (in number of items). */\n this._dataLength = 0;\n /** The size of the viewport (in pixels). */\n this._viewportSize = 0;\n /** The last rendered content offset that was set. */\n this._renderedContentOffset = 0;\n /**\n * Whether the last rendered content offset was to the end of the content (and therefore needs to\n * be rewritten as an offset to the start of the content).\n */\n this._renderedContentOffsetNeedsRewrite = false;\n /** Whether there is a pending change detection cycle. */\n this._isChangeDetectionPending = false;\n /** A list of functions to run after the next change detection cycle. */\n this._runAfterChangeDetection = [];\n /** Subscription to changes in the viewport size. */\n this._viewportChanges = Subscription.EMPTY;\n if (!_scrollStrategy && (typeof ngDevMode === 'undefined' || ngDevMode)) {\n throw Error('Error: cdk-virtual-scroll-viewport requires the \"itemSize\" property to be set.');\n }\n this._viewportChanges = viewportRuler.change().subscribe(() => {\n this.checkViewportSize();\n });\n if (!this.scrollable) {\n // No scrollable is provided, so the virtual-scroll-viewport needs to become a scrollable\n this.elementRef.nativeElement.classList.add('cdk-virtual-scrollable');\n this.scrollable = this;\n }\n }\n ngOnInit() {\n // Scrolling depends on the element dimensions which we can't get during SSR.\n if (!this._platform.isBrowser) {\n return;\n }\n if (this.scrollable === this) {\n super.ngOnInit();\n }\n // It's still too early to measure the viewport at this point. Deferring with a promise allows\n // the Viewport to be rendered with the correct size before we measure. We run this outside the\n // zone to avoid causing more change detection cycles. We handle the change detection loop\n // ourselves instead.\n this.ngZone.runOutsideAngular(() => Promise.resolve().then(() => {\n this._measureViewportSize();\n this._scrollStrategy.attach(this);\n this.scrollable\n .elementScrolled()\n .pipe(\n // Start off with a fake scroll event so we properly detect our initial position.\n startWith(null), \n // Collect multiple events into one until the next animation frame. This way if\n // there are multiple scroll events in the same frame we only need to recheck\n // our layout once.\n auditTime(0, SCROLL_SCHEDULER))\n .subscribe(() => this._scrollStrategy.onContentScrolled());\n this._markChangeDetectionNeeded();\n }));\n }\n ngOnDestroy() {\n this.detach();\n this._scrollStrategy.detach();\n // Complete all subjects\n this._renderedRangeSubject.complete();\n this._detachedSubject.complete();\n this._viewportChanges.unsubscribe();\n super.ngOnDestroy();\n }\n /** Attaches a `CdkVirtualScrollRepeater` to this viewport. */\n attach(forOf) {\n if (this._forOf && (typeof ngDevMode === 'undefined' || ngDevMode)) {\n throw Error('CdkVirtualScrollViewport is already attached.');\n }\n // Subscribe to the data stream of the CdkVirtualForOf to keep track of when the data length\n // changes. Run outside the zone to avoid triggering change detection, since we're managing the\n // change detection loop ourselves.\n this.ngZone.runOutsideAngular(() => {\n this._forOf = forOf;\n this._forOf.dataStream.pipe(takeUntil(this._detachedSubject)).subscribe(data => {\n const newLength = data.length;\n if (newLength !== this._dataLength) {\n this._dataLength = newLength;\n this._scrollStrategy.onDataLengthChanged();\n }\n this._doChangeDetection();\n });\n });\n }\n /** Detaches the current `CdkVirtualForOf`. */\n detach() {\n this._forOf = null;\n this._detachedSubject.next();\n }\n /** Gets the length of the data bound to this viewport (in number of items). */\n getDataLength() {\n return this._dataLength;\n }\n /** Gets the size of the viewport (in pixels). */\n getViewportSize() {\n return this._viewportSize;\n }\n // TODO(mmalerba): This is technically out of sync with what's really rendered until a render\n // cycle happens. I'm being careful to only call it after the render cycle is complete and before\n // setting it to something else, but its error prone and should probably be split into\n // `pendingRange` and `renderedRange`, the latter reflecting whats actually in the DOM.\n /** Get the current rendered range of items. */\n getRenderedRange() {\n return this._renderedRange;\n }\n measureBoundingClientRectWithScrollOffset(from) {\n return this.getElementRef().nativeElement.getBoundingClientRect()[from];\n }\n /**\n * Sets the total size of all content (in pixels), including content that is not currently\n * rendered.\n */\n setTotalContentSize(size) {\n if (this._totalContentSize !== size) {\n this._totalContentSize = size;\n this._calculateSpacerSize();\n this._markChangeDetectionNeeded();\n }\n }\n /** Sets the currently rendered range of indices. */\n setRenderedRange(range) {\n if (!rangesEqual(this._renderedRange, range)) {\n if (this.appendOnly) {\n range = { start: 0, end: Math.max(this._renderedRange.end, range.end) };\n }\n this._renderedRangeSubject.next((this._renderedRange = range));\n this._markChangeDetectionNeeded(() => this._scrollStrategy.onContentRendered());\n }\n }\n /**\n * Gets the offset from the start of the viewport to the start of the rendered data (in pixels).\n */\n getOffsetToRenderedContentStart() {\n return this._renderedContentOffsetNeedsRewrite ? null : this._renderedContentOffset;\n }\n /**\n * Sets the offset from the start of the viewport to either the start or end of the rendered data\n * (in pixels).\n */\n setRenderedContentOffset(offset, to = 'to-start') {\n // In appendOnly, we always start from the top\n offset = this.appendOnly && to === 'to-start' ? 0 : offset;\n // For a horizontal viewport in a right-to-left language we need to translate along the x-axis\n // in the negative direction.\n const isRtl = this.dir && this.dir.value == 'rtl';\n const isHorizontal = this.orientation == 'horizontal';\n const axis = isHorizontal ? 'X' : 'Y';\n const axisDirection = isHorizontal && isRtl ? -1 : 1;\n let transform = `translate${axis}(${Number(axisDirection * offset)}px)`;\n this._renderedContentOffset = offset;\n if (to === 'to-end') {\n transform += ` translate${axis}(-100%)`;\n // The viewport should rewrite this as a `to-start` offset on the next render cycle. Otherwise\n // elements will appear to expand in the wrong direction (e.g. `mat-expansion-panel` would\n // expand upward).\n this._renderedContentOffsetNeedsRewrite = true;\n }\n if (this._renderedContentTransform != transform) {\n // We know this value is safe because we parse `offset` with `Number()` before passing it\n // into the string.\n this._renderedContentTransform = transform;\n this._markChangeDetectionNeeded(() => {\n if (this._renderedContentOffsetNeedsRewrite) {\n this._renderedContentOffset -= this.measureRenderedContentSize();\n this._renderedContentOffsetNeedsRewrite = false;\n this.setRenderedContentOffset(this._renderedContentOffset);\n }\n else {\n this._scrollStrategy.onRenderedOffsetChanged();\n }\n });\n }\n }\n /**\n * Scrolls to the given offset from the start of the viewport. Please note that this is not always\n * the same as setting `scrollTop` or `scrollLeft`. In a horizontal viewport with right-to-left\n * direction, this would be the equivalent of setting a fictional `scrollRight` property.\n * @param offset The offset to scroll to.\n * @param behavior The ScrollBehavior to use when scrolling. Default is behavior is `auto`.\n */\n scrollToOffset(offset, behavior = 'auto') {\n const options = { behavior };\n if (this.orientation === 'horizontal') {\n options.start = offset;\n }\n else {\n options.top = offset;\n }\n this.scrollable.scrollTo(options);\n }\n /**\n * Scrolls to the offset for the given index.\n * @param index The index of the element to scroll to.\n * @param behavior The ScrollBehavior to use when scrolling. Default is behavior is `auto`.\n */\n scrollToIndex(index, behavior = 'auto') {\n this._scrollStrategy.scrollToIndex(index, behavior);\n }\n /**\n * Gets the current scroll offset from the start of the scrollable (in pixels).\n * @param from The edge to measure the offset from. Defaults to 'top' in vertical mode and 'start'\n * in horizontal mode.\n */\n measureScrollOffset(from) {\n // This is to break the call cycle\n let measureScrollOffset;\n if (this.scrollable == this) {\n measureScrollOffset = (_from) => super.measureScrollOffset(_from);\n }\n else {\n measureScrollOffset = (_from) => this.scrollable.measureScrollOffset(_from);\n }\n return Math.max(0, measureScrollOffset(from ?? (this.orientation === 'horizontal' ? 'start' : 'top')) -\n this.measureViewportOffset());\n }\n /**\n * Measures the offset of the viewport from the scrolling container\n * @param from The edge to measure from.\n */\n measureViewportOffset(from) {\n let fromRect;\n const LEFT = 'left';\n const RIGHT = 'right';\n const isRtl = this.dir?.value == 'rtl';\n if (from == 'start') {\n fromRect = isRtl ? RIGHT : LEFT;\n }\n else if (from == 'end') {\n fromRect = isRtl ? LEFT : RIGHT;\n }\n else if (from) {\n fromRect = from;\n }\n else {\n fromRect = this.orientation === 'horizontal' ? 'left' : 'top';\n }\n const scrollerClientRect = this.scrollable.measureBoundingClientRectWithScrollOffset(fromRect);\n const viewportClientRect = this.elementRef.nativeElement.getBoundingClientRect()[fromRect];\n return viewportClientRect - scrollerClientRect;\n }\n /** Measure the combined size of all of the rendered items. */\n measureRenderedContentSize() {\n const contentEl = this._contentWrapper.nativeElement;\n return this.orientation === 'horizontal' ? contentEl.offsetWidth : contentEl.offsetHeight;\n }\n /**\n * Measure the total combined size of the given range. Throws if the range includes items that are\n * not rendered.\n */\n measureRangeSize(range) {\n if (!this._forOf) {\n return 0;\n }\n return this._forOf.measureRangeSize(range, this.orientation);\n }\n /** Update the viewport dimensions and re-render. */\n checkViewportSize() {\n // TODO: Cleanup later when add logic for handling content resize\n this._measureViewportSize();\n this._scrollStrategy.onDataLengthChanged();\n }\n /** Measure the viewport size. */\n _measureViewportSize() {\n this._viewportSize = this.scrollable.measureViewportSize(this.orientation);\n }\n /** Queue up change detection to run. */\n _markChangeDetectionNeeded(runAfter) {\n if (runAfter) {\n this._runAfterChangeDetection.push(runAfter);\n }\n // Use a Promise to batch together calls to `_doChangeDetection`. This way if we set a bunch of\n // properties sequentially we only have to run `_doChangeDetection` once at the end.\n if (!this._isChangeDetectionPending) {\n this._isChangeDetectionPending = true;\n this.ngZone.runOutsideAngular(() => Promise.resolve().then(() => {\n this._doChangeDetection();\n }));\n }\n }\n /** Run change detection. */\n _doChangeDetection() {\n this._isChangeDetectionPending = false;\n // Apply the content transform. The transform can't be set via an Angular binding because\n // bypassSecurityTrustStyle is banned in Google. However the value is safe, it's composed of\n // string literals, a variable that can only be 'X' or 'Y', and user input that is run through\n // the `Number` function first to coerce it to a numeric value.\n this._contentWrapper.nativeElement.style.transform = this._renderedContentTransform;\n // Apply changes to Angular bindings. Note: We must call `markForCheck` to run change detection\n // from the root, since the repeated items are content projected in. Calling `detectChanges`\n // instead does not properly check the projected content.\n this.ngZone.run(() => this._changeDetectorRef.markForCheck());\n const runAfterChangeDetection = this._runAfterChangeDetection;\n this._runAfterChangeDetection = [];\n for (const fn of runAfterChangeDetection) {\n fn();\n }\n }\n /** Calculates the `style.width` and `style.height` for the spacer element. */\n _calculateSpacerSize() {\n this._totalContentHeight =\n this.orientation === 'horizontal' ? '' : `${this._totalContentSize}px`;\n this._totalContentWidth =\n this.orientation === 'horizontal' ? `${this._totalContentSize}px` : '';\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollViewport, deps: [{ token: i0.ElementRef }, { token: i0.ChangeDetectorRef }, { token: i0.NgZone }, { token: VIRTUAL_SCROLL_STRATEGY, optional: true }, { token: i2.Directionality, optional: true }, { token: ScrollDispatcher }, { token: ViewportRuler }, { token: VIRTUAL_SCROLLABLE, optional: true }], target: i0.ɵɵFactoryTarget.Component }); }\n static { this.ɵcmp = i0.ɵɵngDeclareComponent({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkVirtualScrollViewport, isStandalone: true, selector: \"cdk-virtual-scroll-viewport\", inputs: { orientation: \"orientation\", appendOnly: \"appendOnly\" }, outputs: { scrolledIndexChange: \"scrolledIndexChange\" }, host: { properties: { \"class.cdk-virtual-scroll-orientation-horizontal\": \"orientation === \\\"horizontal\\\"\", \"class.cdk-virtual-scroll-orientation-vertical\": \"orientation !== \\\"horizontal\\\"\" }, classAttribute: \"cdk-virtual-scroll-viewport\" }, providers: [\n {\n provide: CdkScrollable,\n useFactory: (virtualScrollable, viewport) => virtualScrollable || viewport,\n deps: [[new Optional(), new Inject(VIRTUAL_SCROLLABLE)], CdkVirtualScrollViewport],\n },\n ], viewQueries: [{ propertyName: \"_contentWrapper\", first: true, predicate: [\"contentWrapper\"], descendants: true, static: true }], usesInheritance: true, ngImport: i0, template: \"\\n
\\n \\n
\\n\\n
\\n\", styles: [\"cdk-virtual-scroll-viewport{display:block;position:relative;transform:translateZ(0)}.cdk-virtual-scrollable{overflow:auto;will-change:scroll-position;contain:strict;-webkit-overflow-scrolling:touch}.cdk-virtual-scroll-content-wrapper{position:absolute;top:0;left:0;contain:content}[dir=rtl] .cdk-virtual-scroll-content-wrapper{right:0;left:auto}.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper{min-height:100%}.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>dl:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>ol:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>table:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>ul:not([cdkVirtualFor]){padding-left:0;padding-right:0;margin-left:0;margin-right:0;border-left-width:0;border-right-width:0;outline:none}.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper{min-width:100%}.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>dl:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>ol:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>table:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>ul:not([cdkVirtualFor]){padding-top:0;padding-bottom:0;margin-top:0;margin-bottom:0;border-top-width:0;border-bottom-width:0;outline:none}.cdk-virtual-scroll-spacer{height:1px;transform-origin:0 0;flex:0 0 auto}[dir=rtl] .cdk-virtual-scroll-spacer{transform-origin:100% 0}\"], changeDetection: i0.ChangeDetectionStrategy.OnPush, encapsulation: i0.ViewEncapsulation.None }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollViewport, decorators: [{\n type: Component,\n args: [{ selector: 'cdk-virtual-scroll-viewport', host: {\n 'class': 'cdk-virtual-scroll-viewport',\n '[class.cdk-virtual-scroll-orientation-horizontal]': 'orientation === \"horizontal\"',\n '[class.cdk-virtual-scroll-orientation-vertical]': 'orientation !== \"horizontal\"',\n }, encapsulation: ViewEncapsulation.None, changeDetection: ChangeDetectionStrategy.OnPush, standalone: true, providers: [\n {\n provide: CdkScrollable,\n useFactory: (virtualScrollable, viewport) => virtualScrollable || viewport,\n deps: [[new Optional(), new Inject(VIRTUAL_SCROLLABLE)], CdkVirtualScrollViewport],\n },\n ], template: \"\\n
\\n \\n
\\n\\n
\\n\", styles: [\"cdk-virtual-scroll-viewport{display:block;position:relative;transform:translateZ(0)}.cdk-virtual-scrollable{overflow:auto;will-change:scroll-position;contain:strict;-webkit-overflow-scrolling:touch}.cdk-virtual-scroll-content-wrapper{position:absolute;top:0;left:0;contain:content}[dir=rtl] .cdk-virtual-scroll-content-wrapper{right:0;left:auto}.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper{min-height:100%}.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>dl:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>ol:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>table:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-horizontal .cdk-virtual-scroll-content-wrapper>ul:not([cdkVirtualFor]){padding-left:0;padding-right:0;margin-left:0;margin-right:0;border-left-width:0;border-right-width:0;outline:none}.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper{min-width:100%}.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>dl:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>ol:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>table:not([cdkVirtualFor]),.cdk-virtual-scroll-orientation-vertical .cdk-virtual-scroll-content-wrapper>ul:not([cdkVirtualFor]){padding-top:0;padding-bottom:0;margin-top:0;margin-bottom:0;border-top-width:0;border-bottom-width:0;outline:none}.cdk-virtual-scroll-spacer{height:1px;transform-origin:0 0;flex:0 0 auto}[dir=rtl] .cdk-virtual-scroll-spacer{transform-origin:100% 0}\"] }]\n }], ctorParameters: function () { return [{ type: i0.ElementRef }, { type: i0.ChangeDetectorRef }, { type: i0.NgZone }, { type: undefined, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [VIRTUAL_SCROLL_STRATEGY]\n }] }, { type: i2.Directionality, decorators: [{\n type: Optional\n }] }, { type: ScrollDispatcher }, { type: ViewportRuler }, { type: CdkVirtualScrollable, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [VIRTUAL_SCROLLABLE]\n }] }]; }, propDecorators: { orientation: [{\n type: Input\n }], appendOnly: [{\n type: Input\n }], scrolledIndexChange: [{\n type: Output\n }], _contentWrapper: [{\n type: ViewChild,\n args: ['contentWrapper', { static: true }]\n }] } });\n\n/** Helper to extract the offset of a DOM Node in a certain direction. */\nfunction getOffset(orientation, direction, node) {\n const el = node;\n if (!el.getBoundingClientRect) {\n return 0;\n }\n const rect = el.getBoundingClientRect();\n if (orientation === 'horizontal') {\n return direction === 'start' ? rect.left : rect.right;\n }\n return direction === 'start' ? rect.top : rect.bottom;\n}\n/**\n * A directive similar to `ngForOf` to be used for rendering data inside a virtual scrolling\n * container.\n */\nclass CdkVirtualForOf {\n /** The DataSource to display. */\n get cdkVirtualForOf() {\n return this._cdkVirtualForOf;\n }\n set cdkVirtualForOf(value) {\n this._cdkVirtualForOf = value;\n if (isDataSource(value)) {\n this._dataSourceChanges.next(value);\n }\n else {\n // If value is an an NgIterable, convert it to an array.\n this._dataSourceChanges.next(new ArrayDataSource(isObservable(value) ? value : Array.from(value || [])));\n }\n }\n /**\n * The `TrackByFunction` to use for tracking changes. The `TrackByFunction` takes the index and\n * the item and produces a value to be used as the item's identity when tracking changes.\n */\n get cdkVirtualForTrackBy() {\n return this._cdkVirtualForTrackBy;\n }\n set cdkVirtualForTrackBy(fn) {\n this._needsUpdate = true;\n this._cdkVirtualForTrackBy = fn\n ? (index, item) => fn(index + (this._renderedRange ? this._renderedRange.start : 0), item)\n : undefined;\n }\n /** The template used to stamp out new elements. */\n set cdkVirtualForTemplate(value) {\n if (value) {\n this._needsUpdate = true;\n this._template = value;\n }\n }\n /**\n * The size of the cache used to store templates that are not being used for re-use later.\n * Setting the cache size to `0` will disable caching. Defaults to 20 templates.\n */\n get cdkVirtualForTemplateCacheSize() {\n return this._viewRepeater.viewCacheSize;\n }\n set cdkVirtualForTemplateCacheSize(size) {\n this._viewRepeater.viewCacheSize = coerceNumberProperty(size);\n }\n constructor(\n /** The view container to add items to. */\n _viewContainerRef, \n /** The template to use when stamping out new items. */\n _template, \n /** The set of available differs. */\n _differs, \n /** The strategy used to render items in the virtual scroll viewport. */\n _viewRepeater, \n /** The virtual scrolling viewport that these items are being rendered in. */\n _viewport, ngZone) {\n this._viewContainerRef = _viewContainerRef;\n this._template = _template;\n this._differs = _differs;\n this._viewRepeater = _viewRepeater;\n this._viewport = _viewport;\n /** Emits when the rendered view of the data changes. */\n this.viewChange = new Subject();\n /** Subject that emits when a new DataSource instance is given. */\n this._dataSourceChanges = new Subject();\n /** Emits whenever the data in the current DataSource changes. */\n this.dataStream = this._dataSourceChanges.pipe(\n // Start off with null `DataSource`.\n startWith(null), \n // Bundle up the previous and current data sources so we can work with both.\n pairwise(), \n // Use `_changeDataSource` to disconnect from the previous data source and connect to the\n // new one, passing back a stream of data changes which we run through `switchMap` to give\n // us a data stream that emits the latest data from whatever the current `DataSource` is.\n switchMap(([prev, cur]) => this._changeDataSource(prev, cur)), \n // Replay the last emitted data when someone subscribes.\n shareReplay(1));\n /** The differ used to calculate changes to the data. */\n this._differ = null;\n /** Whether the rendered data should be updated during the next ngDoCheck cycle. */\n this._needsUpdate = false;\n this._destroyed = new Subject();\n this.dataStream.subscribe(data => {\n this._data = data;\n this._onRenderedDataChange();\n });\n this._viewport.renderedRangeStream.pipe(takeUntil(this._destroyed)).subscribe(range => {\n this._renderedRange = range;\n if (this.viewChange.observers.length) {\n ngZone.run(() => this.viewChange.next(this._renderedRange));\n }\n this._onRenderedDataChange();\n });\n this._viewport.attach(this);\n }\n /**\n * Measures the combined size (width for horizontal orientation, height for vertical) of all items\n * in the specified range. Throws an error if the range includes items that are not currently\n * rendered.\n */\n measureRangeSize(range, orientation) {\n if (range.start >= range.end) {\n return 0;\n }\n if ((range.start < this._renderedRange.start || range.end > this._renderedRange.end) &&\n (typeof ngDevMode === 'undefined' || ngDevMode)) {\n throw Error(`Error: attempted to measure an item that isn't rendered.`);\n }\n // The index into the list of rendered views for the first item in the range.\n const renderedStartIndex = range.start - this._renderedRange.start;\n // The length of the range we're measuring.\n const rangeLen = range.end - range.start;\n // Loop over all the views, find the first and land node and compute the size by subtracting\n // the top of the first node from the bottom of the last one.\n let firstNode;\n let lastNode;\n // Find the first node by starting from the beginning and going forwards.\n for (let i = 0; i < rangeLen; i++) {\n const view = this._viewContainerRef.get(i + renderedStartIndex);\n if (view && view.rootNodes.length) {\n firstNode = lastNode = view.rootNodes[0];\n break;\n }\n }\n // Find the last node by starting from the end and going backwards.\n for (let i = rangeLen - 1; i > -1; i--) {\n const view = this._viewContainerRef.get(i + renderedStartIndex);\n if (view && view.rootNodes.length) {\n lastNode = view.rootNodes[view.rootNodes.length - 1];\n break;\n }\n }\n return firstNode && lastNode\n ? getOffset(orientation, 'end', lastNode) - getOffset(orientation, 'start', firstNode)\n : 0;\n }\n ngDoCheck() {\n if (this._differ && this._needsUpdate) {\n // TODO(mmalerba): We should differentiate needs update due to scrolling and a new portion of\n // this list being rendered (can use simpler algorithm) vs needs update due to data actually\n // changing (need to do this diff).\n const changes = this._differ.diff(this._renderedItems);\n if (!changes) {\n this._updateContext();\n }\n else {\n this._applyChanges(changes);\n }\n this._needsUpdate = false;\n }\n }\n ngOnDestroy() {\n this._viewport.detach();\n this._dataSourceChanges.next(undefined);\n this._dataSourceChanges.complete();\n this.viewChange.complete();\n this._destroyed.next();\n this._destroyed.complete();\n this._viewRepeater.detach();\n }\n /** React to scroll state changes in the viewport. */\n _onRenderedDataChange() {\n if (!this._renderedRange) {\n return;\n }\n this._renderedItems = this._data.slice(this._renderedRange.start, this._renderedRange.end);\n if (!this._differ) {\n // Use a wrapper function for the `trackBy` so any new values are\n // picked up automatically without having to recreate the differ.\n this._differ = this._differs.find(this._renderedItems).create((index, item) => {\n return this.cdkVirtualForTrackBy ? this.cdkVirtualForTrackBy(index, item) : item;\n });\n }\n this._needsUpdate = true;\n }\n /** Swap out one `DataSource` for another. */\n _changeDataSource(oldDs, newDs) {\n if (oldDs) {\n oldDs.disconnect(this);\n }\n this._needsUpdate = true;\n return newDs ? newDs.connect(this) : of();\n }\n /** Update the `CdkVirtualForOfContext` for all views. */\n _updateContext() {\n const count = this._data.length;\n let i = this._viewContainerRef.length;\n while (i--) {\n const view = this._viewContainerRef.get(i);\n view.context.index = this._renderedRange.start + i;\n view.context.count = count;\n this._updateComputedContextProperties(view.context);\n view.detectChanges();\n }\n }\n /** Apply changes to the DOM. */\n _applyChanges(changes) {\n this._viewRepeater.applyChanges(changes, this._viewContainerRef, (record, _adjustedPreviousIndex, currentIndex) => this._getEmbeddedViewArgs(record, currentIndex), record => record.item);\n // Update $implicit for any items that had an identity change.\n changes.forEachIdentityChange((record) => {\n const view = this._viewContainerRef.get(record.currentIndex);\n view.context.$implicit = record.item;\n });\n // Update the context variables on all items.\n const count = this._data.length;\n let i = this._viewContainerRef.length;\n while (i--) {\n const view = this._viewContainerRef.get(i);\n view.context.index = this._renderedRange.start + i;\n view.context.count = count;\n this._updateComputedContextProperties(view.context);\n }\n }\n /** Update the computed properties on the `CdkVirtualForOfContext`. */\n _updateComputedContextProperties(context) {\n context.first = context.index === 0;\n context.last = context.index === context.count - 1;\n context.even = context.index % 2 === 0;\n context.odd = !context.even;\n }\n _getEmbeddedViewArgs(record, index) {\n // Note that it's important that we insert the item directly at the proper index,\n // rather than inserting it and the moving it in place, because if there's a directive\n // on the same node that injects the `ViewContainerRef`, Angular will insert another\n // comment node which can throw off the move when it's being repeated for all items.\n return {\n templateRef: this._template,\n context: {\n $implicit: record.item,\n // It's guaranteed that the iterable is not \"undefined\" or \"null\" because we only\n // generate views for elements if the \"cdkVirtualForOf\" iterable has elements.\n cdkVirtualForOf: this._cdkVirtualForOf,\n index: -1,\n count: -1,\n first: false,\n last: false,\n odd: false,\n even: false,\n },\n index,\n };\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualForOf, deps: [{ token: i0.ViewContainerRef }, { token: i0.TemplateRef }, { token: i0.IterableDiffers }, { token: _VIEW_REPEATER_STRATEGY }, { token: CdkVirtualScrollViewport, skipSelf: true }, { token: i0.NgZone }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkVirtualForOf, isStandalone: true, selector: \"[cdkVirtualFor][cdkVirtualForOf]\", inputs: { cdkVirtualForOf: \"cdkVirtualForOf\", cdkVirtualForTrackBy: \"cdkVirtualForTrackBy\", cdkVirtualForTemplate: \"cdkVirtualForTemplate\", cdkVirtualForTemplateCacheSize: \"cdkVirtualForTemplateCacheSize\" }, providers: [{ provide: _VIEW_REPEATER_STRATEGY, useClass: _RecycleViewRepeaterStrategy }], ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualForOf, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkVirtualFor][cdkVirtualForOf]',\n providers: [{ provide: _VIEW_REPEATER_STRATEGY, useClass: _RecycleViewRepeaterStrategy }],\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ViewContainerRef }, { type: i0.TemplateRef }, { type: i0.IterableDiffers }, { type: i2$1._RecycleViewRepeaterStrategy, decorators: [{\n type: Inject,\n args: [_VIEW_REPEATER_STRATEGY]\n }] }, { type: CdkVirtualScrollViewport, decorators: [{\n type: SkipSelf\n }] }, { type: i0.NgZone }]; }, propDecorators: { cdkVirtualForOf: [{\n type: Input\n }], cdkVirtualForTrackBy: [{\n type: Input\n }], cdkVirtualForTemplate: [{\n type: Input\n }], cdkVirtualForTemplateCacheSize: [{\n type: Input\n }] } });\n\n/**\n * Provides a virtual scrollable for the element it is attached to.\n */\nclass CdkVirtualScrollableElement extends CdkVirtualScrollable {\n constructor(elementRef, scrollDispatcher, ngZone, dir) {\n super(elementRef, scrollDispatcher, ngZone, dir);\n }\n measureBoundingClientRectWithScrollOffset(from) {\n return (this.getElementRef().nativeElement.getBoundingClientRect()[from] -\n this.measureScrollOffset(from));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollableElement, deps: [{ token: i0.ElementRef }, { token: ScrollDispatcher }, { token: i0.NgZone }, { token: i2.Directionality, optional: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkVirtualScrollableElement, isStandalone: true, selector: \"[cdkVirtualScrollingElement]\", host: { classAttribute: \"cdk-virtual-scrollable\" }, providers: [{ provide: VIRTUAL_SCROLLABLE, useExisting: CdkVirtualScrollableElement }], usesInheritance: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollableElement, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkVirtualScrollingElement]',\n providers: [{ provide: VIRTUAL_SCROLLABLE, useExisting: CdkVirtualScrollableElement }],\n standalone: true,\n host: {\n 'class': 'cdk-virtual-scrollable',\n },\n }]\n }], ctorParameters: function () { return [{ type: i0.ElementRef }, { type: ScrollDispatcher }, { type: i0.NgZone }, { type: i2.Directionality, decorators: [{\n type: Optional\n }] }]; } });\n\n/**\n * Provides as virtual scrollable for the global / window scrollbar.\n */\nclass CdkVirtualScrollableWindow extends CdkVirtualScrollable {\n constructor(scrollDispatcher, ngZone, dir) {\n super(new ElementRef(document.documentElement), scrollDispatcher, ngZone, dir);\n this._elementScrolled = new Observable((observer) => this.ngZone.runOutsideAngular(() => fromEvent(document, 'scroll').pipe(takeUntil(this._destroyed)).subscribe(observer)));\n }\n measureBoundingClientRectWithScrollOffset(from) {\n return this.getElementRef().nativeElement.getBoundingClientRect()[from];\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollableWindow, deps: [{ token: ScrollDispatcher }, { token: i0.NgZone }, { token: i2.Directionality, optional: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkVirtualScrollableWindow, isStandalone: true, selector: \"cdk-virtual-scroll-viewport[scrollWindow]\", providers: [{ provide: VIRTUAL_SCROLLABLE, useExisting: CdkVirtualScrollableWindow }], usesInheritance: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkVirtualScrollableWindow, decorators: [{\n type: Directive,\n args: [{\n selector: 'cdk-virtual-scroll-viewport[scrollWindow]',\n providers: [{ provide: VIRTUAL_SCROLLABLE, useExisting: CdkVirtualScrollableWindow }],\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: ScrollDispatcher }, { type: i0.NgZone }, { type: i2.Directionality, decorators: [{\n type: Optional\n }] }]; } });\n\nclass CdkScrollableModule {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkScrollableModule, deps: [], target: i0.ɵɵFactoryTarget.NgModule }); }\n static { this.ɵmod = i0.ɵɵngDeclareNgModule({ minVersion: \"14.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkScrollableModule, imports: [CdkScrollable], exports: [CdkScrollable] }); }\n static { this.ɵinj = i0.ɵɵngDeclareInjector({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkScrollableModule }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkScrollableModule, decorators: [{\n type: NgModule,\n args: [{\n exports: [CdkScrollable],\n imports: [CdkScrollable],\n }]\n }] });\n/**\n * @docs-primary-export\n */\nclass ScrollingModule {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ScrollingModule, deps: [], target: i0.ɵɵFactoryTarget.NgModule }); }\n static { this.ɵmod = i0.ɵɵngDeclareNgModule({ minVersion: \"14.0.0\", version: \"16.0.0\", ngImport: i0, type: ScrollingModule, imports: [BidiModule, CdkScrollableModule, CdkVirtualScrollViewport,\n CdkFixedSizeVirtualScroll,\n CdkVirtualForOf,\n CdkVirtualScrollableWindow,\n CdkVirtualScrollableElement], exports: [BidiModule, CdkScrollableModule, CdkFixedSizeVirtualScroll,\n CdkVirtualForOf,\n CdkVirtualScrollViewport,\n CdkVirtualScrollableWindow,\n CdkVirtualScrollableElement] }); }\n static { this.ɵinj = i0.ɵɵngDeclareInjector({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ScrollingModule, imports: [BidiModule,\n CdkScrollableModule, BidiModule, CdkScrollableModule] }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: ScrollingModule, decorators: [{\n type: NgModule,\n args: [{\n imports: [\n BidiModule,\n CdkScrollableModule,\n CdkVirtualScrollViewport,\n CdkFixedSizeVirtualScroll,\n CdkVirtualForOf,\n CdkVirtualScrollableWindow,\n CdkVirtualScrollableElement,\n ],\n exports: [\n BidiModule,\n CdkScrollableModule,\n CdkFixedSizeVirtualScroll,\n CdkVirtualForOf,\n CdkVirtualScrollViewport,\n CdkVirtualScrollableWindow,\n CdkVirtualScrollableElement,\n ],\n }]\n }] });\n\n/**\n * Generated bundle index. Do not edit.\n */\n\nexport { CdkFixedSizeVirtualScroll, CdkScrollable, CdkScrollableModule, CdkVirtualForOf, CdkVirtualScrollViewport, CdkVirtualScrollable, CdkVirtualScrollableElement, CdkVirtualScrollableWindow, DEFAULT_RESIZE_TIME, DEFAULT_SCROLL_TIME, FixedSizeVirtualScrollStrategy, ScrollDispatcher, ScrollingModule, VIRTUAL_SCROLLABLE, VIRTUAL_SCROLL_STRATEGY, ViewportRuler, _fixedSizeVirtualScrollStrategyFactory };\n","import { FocusKeyManager } from '@angular/cdk/a11y';\nimport * as i1 from '@angular/cdk/bidi';\nimport { BidiModule } from '@angular/cdk/bidi';\nimport { coerceBooleanProperty, coerceNumberProperty } from '@angular/cdk/coercion';\nimport { hasModifierKey, SPACE, ENTER } from '@angular/cdk/keycodes';\nimport * as i0 from '@angular/core';\nimport { Directive, InjectionToken, EventEmitter, forwardRef, TemplateRef, Component, ViewEncapsulation, ChangeDetectionStrategy, Inject, Optional, ContentChild, ViewChild, Input, Output, QueryList, ContentChildren, NgModule } from '@angular/core';\nimport { _getFocusedElementPierceShadowDom } from '@angular/cdk/platform';\nimport { Subject, of } from 'rxjs';\nimport { startWith, takeUntil } from 'rxjs/operators';\n\nclass CdkStepHeader {\n constructor(_elementRef) {\n this._elementRef = _elementRef;\n }\n /** Focuses the step header. */\n focus() {\n this._elementRef.nativeElement.focus();\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepHeader, deps: [{ token: i0.ElementRef }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkStepHeader, selector: \"[cdkStepHeader]\", host: { attributes: { \"role\": \"tab\" } }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepHeader, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkStepHeader]',\n host: {\n 'role': 'tab',\n },\n }]\n }], ctorParameters: function () { return [{ type: i0.ElementRef }]; } });\n\nclass CdkStepLabel {\n constructor(/** @docs-private */ template) {\n this.template = template;\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepLabel, deps: [{ token: i0.TemplateRef }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkStepLabel, selector: \"[cdkStepLabel]\", ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepLabel, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkStepLabel]',\n }]\n }], ctorParameters: function () { return [{ type: i0.TemplateRef }]; } });\n\n/** Used to generate unique ID for each stepper component. */\nlet nextId = 0;\n/** Change event emitted on selection changes. */\nclass StepperSelectionEvent {\n}\n/** Enum to represent the different states of the steps. */\nconst STEP_STATE = {\n NUMBER: 'number',\n EDIT: 'edit',\n DONE: 'done',\n ERROR: 'error',\n};\n/** InjectionToken that can be used to specify the global stepper options. */\nconst STEPPER_GLOBAL_OPTIONS = new InjectionToken('STEPPER_GLOBAL_OPTIONS');\nclass CdkStep {\n /** Whether the user can return to this step once it has been marked as completed. */\n get editable() {\n return this._editable;\n }\n set editable(value) {\n this._editable = coerceBooleanProperty(value);\n }\n /** Whether the completion of step is optional. */\n get optional() {\n return this._optional;\n }\n set optional(value) {\n this._optional = coerceBooleanProperty(value);\n }\n /** Whether step is marked as completed. */\n get completed() {\n return this._completedOverride == null ? this._getDefaultCompleted() : this._completedOverride;\n }\n set completed(value) {\n this._completedOverride = coerceBooleanProperty(value);\n }\n _getDefaultCompleted() {\n return this.stepControl ? this.stepControl.valid && this.interacted : this.interacted;\n }\n /** Whether step has an error. */\n get hasError() {\n return this._customError == null ? this._getDefaultError() : this._customError;\n }\n set hasError(value) {\n this._customError = coerceBooleanProperty(value);\n }\n _getDefaultError() {\n return this.stepControl && this.stepControl.invalid && this.interacted;\n }\n constructor(_stepper, stepperOptions) {\n this._stepper = _stepper;\n /** Whether user has attempted to move away from the step. */\n this.interacted = false;\n /** Emits when the user has attempted to move away from the step. */\n this.interactedStream = new EventEmitter();\n this._editable = true;\n this._optional = false;\n this._completedOverride = null;\n this._customError = null;\n this._stepperOptions = stepperOptions ? stepperOptions : {};\n this._displayDefaultIndicatorType = this._stepperOptions.displayDefaultIndicatorType !== false;\n }\n /** Selects this step component. */\n select() {\n this._stepper.selected = this;\n }\n /** Resets the step to its initial state. Note that this includes resetting form data. */\n reset() {\n this.interacted = false;\n if (this._completedOverride != null) {\n this._completedOverride = false;\n }\n if (this._customError != null) {\n this._customError = false;\n }\n if (this.stepControl) {\n this.stepControl.reset();\n }\n }\n ngOnChanges() {\n // Since basically all inputs of the MatStep get proxied through the view down to the\n // underlying MatStepHeader, we have to make sure that change detection runs correctly.\n this._stepper._stateChanged();\n }\n _markAsInteracted() {\n if (!this.interacted) {\n this.interacted = true;\n this.interactedStream.emit(this);\n }\n }\n /** Determines whether the error state can be shown. */\n _showError() {\n // We want to show the error state either if the user opted into/out of it using the\n // global options, or if they've explicitly set it through the `hasError` input.\n return this._stepperOptions.showError ?? this._customError != null;\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStep, deps: [{ token: forwardRef(() => CdkStepper) }, { token: STEPPER_GLOBAL_OPTIONS, optional: true }], target: i0.ɵɵFactoryTarget.Component }); }\n static { this.ɵcmp = i0.ɵɵngDeclareComponent({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkStep, selector: \"cdk-step\", inputs: { stepControl: \"stepControl\", label: \"label\", errorMessage: \"errorMessage\", ariaLabel: [\"aria-label\", \"ariaLabel\"], ariaLabelledby: [\"aria-labelledby\", \"ariaLabelledby\"], state: \"state\", editable: \"editable\", optional: \"optional\", completed: \"completed\", hasError: \"hasError\" }, outputs: { interactedStream: \"interacted\" }, queries: [{ propertyName: \"stepLabel\", first: true, predicate: CdkStepLabel, descendants: true }], viewQueries: [{ propertyName: \"content\", first: true, predicate: TemplateRef, descendants: true, static: true }], exportAs: [\"cdkStep\"], usesOnChanges: true, ngImport: i0, template: '
', isInline: true, changeDetection: i0.ChangeDetectionStrategy.OnPush, encapsulation: i0.ViewEncapsulation.None }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStep, decorators: [{\n type: Component,\n args: [{\n selector: 'cdk-step',\n exportAs: 'cdkStep',\n template: '
',\n encapsulation: ViewEncapsulation.None,\n changeDetection: ChangeDetectionStrategy.OnPush,\n }]\n }], ctorParameters: function () { return [{ type: CdkStepper, decorators: [{\n type: Inject,\n args: [forwardRef(() => CdkStepper)]\n }] }, { type: undefined, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [STEPPER_GLOBAL_OPTIONS]\n }] }]; }, propDecorators: { stepLabel: [{\n type: ContentChild,\n args: [CdkStepLabel]\n }], content: [{\n type: ViewChild,\n args: [TemplateRef, { static: true }]\n }], stepControl: [{\n type: Input\n }], interactedStream: [{\n type: Output,\n args: ['interacted']\n }], label: [{\n type: Input\n }], errorMessage: [{\n type: Input\n }], ariaLabel: [{\n type: Input,\n args: ['aria-label']\n }], ariaLabelledby: [{\n type: Input,\n args: ['aria-labelledby']\n }], state: [{\n type: Input\n }], editable: [{\n type: Input\n }], optional: [{\n type: Input\n }], completed: [{\n type: Input\n }], hasError: [{\n type: Input\n }] } });\nclass CdkStepper {\n /** Whether the validity of previous steps should be checked or not. */\n get linear() {\n return this._linear;\n }\n set linear(value) {\n this._linear = coerceBooleanProperty(value);\n }\n /** The index of the selected step. */\n get selectedIndex() {\n return this._selectedIndex;\n }\n set selectedIndex(index) {\n const newIndex = coerceNumberProperty(index);\n if (this.steps && this._steps) {\n // Ensure that the index can't be out of bounds.\n if (!this._isValidIndex(newIndex) && (typeof ngDevMode === 'undefined' || ngDevMode)) {\n throw Error('cdkStepper: Cannot assign out-of-bounds value to `selectedIndex`.');\n }\n this.selected?._markAsInteracted();\n if (this._selectedIndex !== newIndex &&\n !this._anyControlsInvalidOrPending(newIndex) &&\n (newIndex >= this._selectedIndex || this.steps.toArray()[newIndex].editable)) {\n this._updateSelectedItemIndex(newIndex);\n }\n }\n else {\n this._selectedIndex = newIndex;\n }\n }\n /** The step that is selected. */\n get selected() {\n return this.steps ? this.steps.toArray()[this.selectedIndex] : undefined;\n }\n set selected(step) {\n this.selectedIndex = step && this.steps ? this.steps.toArray().indexOf(step) : -1;\n }\n /** Orientation of the stepper. */\n get orientation() {\n return this._orientation;\n }\n set orientation(value) {\n // This is a protected method so that `MatStepper` can hook into it.\n this._orientation = value;\n if (this._keyManager) {\n this._keyManager.withVerticalOrientation(value === 'vertical');\n }\n }\n constructor(_dir, _changeDetectorRef, _elementRef) {\n this._dir = _dir;\n this._changeDetectorRef = _changeDetectorRef;\n this._elementRef = _elementRef;\n /** Emits when the component is destroyed. */\n this._destroyed = new Subject();\n /** Steps that belong to the current stepper, excluding ones from nested steppers. */\n this.steps = new QueryList();\n /** List of step headers sorted based on their DOM order. */\n this._sortedHeaders = new QueryList();\n this._linear = false;\n this._selectedIndex = 0;\n /** Event emitted when the selected step has changed. */\n this.selectionChange = new EventEmitter();\n this._orientation = 'horizontal';\n this._groupId = nextId++;\n }\n ngAfterContentInit() {\n this._steps.changes\n .pipe(startWith(this._steps), takeUntil(this._destroyed))\n .subscribe((steps) => {\n this.steps.reset(steps.filter(step => step._stepper === this));\n this.steps.notifyOnChanges();\n });\n }\n ngAfterViewInit() {\n // If the step headers are defined outside of the `ngFor` that renders the steps, like in the\n // Material stepper, they won't appear in the `QueryList` in the same order as they're\n // rendered in the DOM which will lead to incorrect keyboard navigation. We need to sort\n // them manually to ensure that they're correct. Alternatively, we can change the Material\n // template to inline the headers in the `ngFor`, but that'll result in a lot of\n // code duplication. See #23539.\n this._stepHeader.changes\n .pipe(startWith(this._stepHeader), takeUntil(this._destroyed))\n .subscribe((headers) => {\n this._sortedHeaders.reset(headers.toArray().sort((a, b) => {\n const documentPosition = a._elementRef.nativeElement.compareDocumentPosition(b._elementRef.nativeElement);\n // `compareDocumentPosition` returns a bitmask so we have to use a bitwise operator.\n // https://developer.mozilla.org/en-US/docs/Web/API/Node/compareDocumentPosition\n // tslint:disable-next-line:no-bitwise\n return documentPosition & Node.DOCUMENT_POSITION_FOLLOWING ? -1 : 1;\n }));\n this._sortedHeaders.notifyOnChanges();\n });\n // Note that while the step headers are content children by default, any components that\n // extend this one might have them as view children. We initialize the keyboard handling in\n // AfterViewInit so we're guaranteed for both view and content children to be defined.\n this._keyManager = new FocusKeyManager(this._sortedHeaders)\n .withWrap()\n .withHomeAndEnd()\n .withVerticalOrientation(this._orientation === 'vertical');\n (this._dir ? this._dir.change : of())\n .pipe(startWith(this._layoutDirection()), takeUntil(this._destroyed))\n .subscribe(direction => this._keyManager.withHorizontalOrientation(direction));\n this._keyManager.updateActiveItem(this._selectedIndex);\n // No need to `takeUntil` here, because we're the ones destroying `steps`.\n this.steps.changes.subscribe(() => {\n if (!this.selected) {\n this._selectedIndex = Math.max(this._selectedIndex - 1, 0);\n }\n });\n // The logic which asserts that the selected index is within bounds doesn't run before the\n // steps are initialized, because we don't how many steps there are yet so we may have an\n // invalid index on init. If that's the case, auto-correct to the default so we don't throw.\n if (!this._isValidIndex(this._selectedIndex)) {\n this._selectedIndex = 0;\n }\n }\n ngOnDestroy() {\n this._keyManager?.destroy();\n this.steps.destroy();\n this._sortedHeaders.destroy();\n this._destroyed.next();\n this._destroyed.complete();\n }\n /** Selects and focuses the next step in list. */\n next() {\n this.selectedIndex = Math.min(this._selectedIndex + 1, this.steps.length - 1);\n }\n /** Selects and focuses the previous step in list. */\n previous() {\n this.selectedIndex = Math.max(this._selectedIndex - 1, 0);\n }\n /** Resets the stepper to its initial state. Note that this includes clearing form data. */\n reset() {\n this._updateSelectedItemIndex(0);\n this.steps.forEach(step => step.reset());\n this._stateChanged();\n }\n /** Returns a unique id for each step label element. */\n _getStepLabelId(i) {\n return `cdk-step-label-${this._groupId}-${i}`;\n }\n /** Returns unique id for each step content element. */\n _getStepContentId(i) {\n return `cdk-step-content-${this._groupId}-${i}`;\n }\n /** Marks the component to be change detected. */\n _stateChanged() {\n this._changeDetectorRef.markForCheck();\n }\n /** Returns position state of the step with the given index. */\n _getAnimationDirection(index) {\n const position = index - this._selectedIndex;\n if (position < 0) {\n return this._layoutDirection() === 'rtl' ? 'next' : 'previous';\n }\n else if (position > 0) {\n return this._layoutDirection() === 'rtl' ? 'previous' : 'next';\n }\n return 'current';\n }\n /** Returns the type of icon to be displayed. */\n _getIndicatorType(index, state = STEP_STATE.NUMBER) {\n const step = this.steps.toArray()[index];\n const isCurrentStep = this._isCurrentStep(index);\n return step._displayDefaultIndicatorType\n ? this._getDefaultIndicatorLogic(step, isCurrentStep)\n : this._getGuidelineLogic(step, isCurrentStep, state);\n }\n _getDefaultIndicatorLogic(step, isCurrentStep) {\n if (step._showError() && step.hasError && !isCurrentStep) {\n return STEP_STATE.ERROR;\n }\n else if (!step.completed || isCurrentStep) {\n return STEP_STATE.NUMBER;\n }\n else {\n return step.editable ? STEP_STATE.EDIT : STEP_STATE.DONE;\n }\n }\n _getGuidelineLogic(step, isCurrentStep, state = STEP_STATE.NUMBER) {\n if (step._showError() && step.hasError && !isCurrentStep) {\n return STEP_STATE.ERROR;\n }\n else if (step.completed && !isCurrentStep) {\n return STEP_STATE.DONE;\n }\n else if (step.completed && isCurrentStep) {\n return state;\n }\n else if (step.editable && isCurrentStep) {\n return STEP_STATE.EDIT;\n }\n else {\n return state;\n }\n }\n _isCurrentStep(index) {\n return this._selectedIndex === index;\n }\n /** Returns the index of the currently-focused step header. */\n _getFocusIndex() {\n return this._keyManager ? this._keyManager.activeItemIndex : this._selectedIndex;\n }\n _updateSelectedItemIndex(newIndex) {\n const stepsArray = this.steps.toArray();\n this.selectionChange.emit({\n selectedIndex: newIndex,\n previouslySelectedIndex: this._selectedIndex,\n selectedStep: stepsArray[newIndex],\n previouslySelectedStep: stepsArray[this._selectedIndex],\n });\n // If focus is inside the stepper, move it to the next header, otherwise it may become\n // lost when the active step content is hidden. We can't be more granular with the check\n // (e.g. checking whether focus is inside the active step), because we don't have a\n // reference to the elements that are rendering out the content.\n this._containsFocus()\n ? this._keyManager.setActiveItem(newIndex)\n : this._keyManager.updateActiveItem(newIndex);\n this._selectedIndex = newIndex;\n this._stateChanged();\n }\n _onKeydown(event) {\n const hasModifier = hasModifierKey(event);\n const keyCode = event.keyCode;\n const manager = this._keyManager;\n if (manager.activeItemIndex != null &&\n !hasModifier &&\n (keyCode === SPACE || keyCode === ENTER)) {\n this.selectedIndex = manager.activeItemIndex;\n event.preventDefault();\n }\n else {\n manager.setFocusOrigin('keyboard').onKeydown(event);\n }\n }\n _anyControlsInvalidOrPending(index) {\n if (this._linear && index >= 0) {\n return this.steps\n .toArray()\n .slice(0, index)\n .some(step => {\n const control = step.stepControl;\n const isIncomplete = control\n ? control.invalid || control.pending || !step.interacted\n : !step.completed;\n return isIncomplete && !step.optional && !step._completedOverride;\n });\n }\n return false;\n }\n _layoutDirection() {\n return this._dir && this._dir.value === 'rtl' ? 'rtl' : 'ltr';\n }\n /** Checks whether the stepper contains the focused element. */\n _containsFocus() {\n const stepperElement = this._elementRef.nativeElement;\n const focusedElement = _getFocusedElementPierceShadowDom();\n return stepperElement === focusedElement || stepperElement.contains(focusedElement);\n }\n /** Checks whether the passed-in index is a valid step index. */\n _isValidIndex(index) {\n return index > -1 && (!this.steps || index < this.steps.length);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepper, deps: [{ token: i1.Directionality, optional: true }, { token: i0.ChangeDetectorRef }, { token: i0.ElementRef }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkStepper, selector: \"[cdkStepper]\", inputs: { linear: \"linear\", selectedIndex: \"selectedIndex\", selected: \"selected\", orientation: \"orientation\" }, outputs: { selectionChange: \"selectionChange\" }, queries: [{ propertyName: \"_steps\", predicate: CdkStep, descendants: true }, { propertyName: \"_stepHeader\", predicate: CdkStepHeader, descendants: true }], exportAs: [\"cdkStepper\"], ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepper, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkStepper]',\n exportAs: 'cdkStepper',\n }]\n }], ctorParameters: function () { return [{ type: i1.Directionality, decorators: [{\n type: Optional\n }] }, { type: i0.ChangeDetectorRef }, { type: i0.ElementRef }]; }, propDecorators: { _steps: [{\n type: ContentChildren,\n args: [CdkStep, { descendants: true }]\n }], _stepHeader: [{\n type: ContentChildren,\n args: [CdkStepHeader, { descendants: true }]\n }], linear: [{\n type: Input\n }], selectedIndex: [{\n type: Input\n }], selected: [{\n type: Input\n }], selectionChange: [{\n type: Output\n }], orientation: [{\n type: Input\n }] } });\n\n/** Button that moves to the next step in a stepper workflow. */\nclass CdkStepperNext {\n constructor(_stepper) {\n this._stepper = _stepper;\n /** Type of the next button. Defaults to \"submit\" if not specified. */\n this.type = 'submit';\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperNext, deps: [{ token: CdkStepper }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkStepperNext, selector: \"button[cdkStepperNext]\", inputs: { type: \"type\" }, host: { listeners: { \"click\": \"_stepper.next()\" }, properties: { \"type\": \"type\" } }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperNext, decorators: [{\n type: Directive,\n args: [{\n selector: 'button[cdkStepperNext]',\n host: {\n '[type]': 'type',\n '(click)': '_stepper.next()',\n },\n }]\n }], ctorParameters: function () { return [{ type: CdkStepper }]; }, propDecorators: { type: [{\n type: Input\n }] } });\n/** Button that moves to the previous step in a stepper workflow. */\nclass CdkStepperPrevious {\n constructor(_stepper) {\n this._stepper = _stepper;\n /** Type of the previous button. Defaults to \"button\" if not specified. */\n this.type = 'button';\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperPrevious, deps: [{ token: CdkStepper }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkStepperPrevious, selector: \"button[cdkStepperPrevious]\", inputs: { type: \"type\" }, host: { listeners: { \"click\": \"_stepper.previous()\" }, properties: { \"type\": \"type\" } }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperPrevious, decorators: [{\n type: Directive,\n args: [{\n selector: 'button[cdkStepperPrevious]',\n host: {\n '[type]': 'type',\n '(click)': '_stepper.previous()',\n },\n }]\n }], ctorParameters: function () { return [{ type: CdkStepper }]; }, propDecorators: { type: [{\n type: Input\n }] } });\n\nclass CdkStepperModule {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperModule, deps: [], target: i0.ɵɵFactoryTarget.NgModule }); }\n static { this.ɵmod = i0.ɵɵngDeclareNgModule({ minVersion: \"14.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperModule, declarations: [CdkStep,\n CdkStepper,\n CdkStepHeader,\n CdkStepLabel,\n CdkStepperNext,\n CdkStepperPrevious], imports: [BidiModule], exports: [CdkStep, CdkStepper, CdkStepHeader, CdkStepLabel, CdkStepperNext, CdkStepperPrevious] }); }\n static { this.ɵinj = i0.ɵɵngDeclareInjector({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperModule, imports: [BidiModule] }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkStepperModule, decorators: [{\n type: NgModule,\n args: [{\n imports: [BidiModule],\n exports: [CdkStep, CdkStepper, CdkStepHeader, CdkStepLabel, CdkStepperNext, CdkStepperPrevious],\n declarations: [\n CdkStep,\n CdkStepper,\n CdkStepHeader,\n CdkStepLabel,\n CdkStepperNext,\n CdkStepperPrevious,\n ],\n }]\n }] });\n\n/**\n * Generated bundle index. Do not edit.\n */\n\nexport { CdkStep, CdkStepHeader, CdkStepLabel, CdkStepper, CdkStepperModule, CdkStepperNext, CdkStepperPrevious, STEPPER_GLOBAL_OPTIONS, STEP_STATE, StepperSelectionEvent };\n","import * as i1 from '@angular/cdk/platform';\nimport { normalizePassiveListenerOptions } from '@angular/cdk/platform';\nimport * as i0 from '@angular/core';\nimport { Injectable, EventEmitter, Directive, Output, Optional, Inject, Input, NgModule } from '@angular/core';\nimport { coerceElement, coerceNumberProperty, coerceBooleanProperty } from '@angular/cdk/coercion';\nimport { EMPTY, Subject, fromEvent } from 'rxjs';\nimport { auditTime, takeUntil } from 'rxjs/operators';\nimport { DOCUMENT } from '@angular/common';\n\n/** Options to pass to the animationstart listener. */\nconst listenerOptions = normalizePassiveListenerOptions({ passive: true });\n/**\n * An injectable service that can be used to monitor the autofill state of an input.\n * Based on the following blog post:\n * https://medium.com/@brunn/detecting-autofilled-fields-in-javascript-aed598d25da7\n */\nclass AutofillMonitor {\n constructor(_platform, _ngZone) {\n this._platform = _platform;\n this._ngZone = _ngZone;\n this._monitoredElements = new Map();\n }\n monitor(elementOrRef) {\n if (!this._platform.isBrowser) {\n return EMPTY;\n }\n const element = coerceElement(elementOrRef);\n const info = this._monitoredElements.get(element);\n if (info) {\n return info.subject;\n }\n const result = new Subject();\n const cssClass = 'cdk-text-field-autofilled';\n const listener = ((event) => {\n // Animation events fire on initial element render, we check for the presence of the autofill\n // CSS class to make sure this is a real change in state, not just the initial render before\n // we fire off events.\n if (event.animationName === 'cdk-text-field-autofill-start' &&\n !element.classList.contains(cssClass)) {\n element.classList.add(cssClass);\n this._ngZone.run(() => result.next({ target: event.target, isAutofilled: true }));\n }\n else if (event.animationName === 'cdk-text-field-autofill-end' &&\n element.classList.contains(cssClass)) {\n element.classList.remove(cssClass);\n this._ngZone.run(() => result.next({ target: event.target, isAutofilled: false }));\n }\n });\n this._ngZone.runOutsideAngular(() => {\n element.addEventListener('animationstart', listener, listenerOptions);\n element.classList.add('cdk-text-field-autofill-monitored');\n });\n this._monitoredElements.set(element, {\n subject: result,\n unlisten: () => {\n element.removeEventListener('animationstart', listener, listenerOptions);\n },\n });\n return result;\n }\n stopMonitoring(elementOrRef) {\n const element = coerceElement(elementOrRef);\n const info = this._monitoredElements.get(element);\n if (info) {\n info.unlisten();\n info.subject.complete();\n element.classList.remove('cdk-text-field-autofill-monitored');\n element.classList.remove('cdk-text-field-autofilled');\n this._monitoredElements.delete(element);\n }\n }\n ngOnDestroy() {\n this._monitoredElements.forEach((_info, element) => this.stopMonitoring(element));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: AutofillMonitor, deps: [{ token: i1.Platform }, { token: i0.NgZone }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: AutofillMonitor, providedIn: 'root' }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: AutofillMonitor, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root' }]\n }], ctorParameters: function () { return [{ type: i1.Platform }, { type: i0.NgZone }]; } });\n/** A directive that can be used to monitor the autofill state of an input. */\nclass CdkAutofill {\n constructor(_elementRef, _autofillMonitor) {\n this._elementRef = _elementRef;\n this._autofillMonitor = _autofillMonitor;\n /** Emits when the autofill state of the element changes. */\n this.cdkAutofill = new EventEmitter();\n }\n ngOnInit() {\n this._autofillMonitor\n .monitor(this._elementRef)\n .subscribe(event => this.cdkAutofill.emit(event));\n }\n ngOnDestroy() {\n this._autofillMonitor.stopMonitoring(this._elementRef);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkAutofill, deps: [{ token: i0.ElementRef }, { token: AutofillMonitor }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkAutofill, selector: \"[cdkAutofill]\", outputs: { cdkAutofill: \"cdkAutofill\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkAutofill, decorators: [{\n type: Directive,\n args: [{\n selector: '[cdkAutofill]',\n }]\n }], ctorParameters: function () { return [{ type: i0.ElementRef }, { type: AutofillMonitor }]; }, propDecorators: { cdkAutofill: [{\n type: Output\n }] } });\n\n/** Directive to automatically resize a textarea to fit its content. */\nclass CdkTextareaAutosize {\n /** Minimum amount of rows in the textarea. */\n get minRows() {\n return this._minRows;\n }\n set minRows(value) {\n this._minRows = coerceNumberProperty(value);\n this._setMinHeight();\n }\n /** Maximum amount of rows in the textarea. */\n get maxRows() {\n return this._maxRows;\n }\n set maxRows(value) {\n this._maxRows = coerceNumberProperty(value);\n this._setMaxHeight();\n }\n /** Whether autosizing is enabled or not */\n get enabled() {\n return this._enabled;\n }\n set enabled(value) {\n value = coerceBooleanProperty(value);\n // Only act if the actual value changed. This specifically helps to not run\n // resizeToFitContent too early (i.e. before ngAfterViewInit)\n if (this._enabled !== value) {\n (this._enabled = value) ? this.resizeToFitContent(true) : this.reset();\n }\n }\n get placeholder() {\n return this._textareaElement.placeholder;\n }\n set placeholder(value) {\n this._cachedPlaceholderHeight = undefined;\n if (value) {\n this._textareaElement.setAttribute('placeholder', value);\n }\n else {\n this._textareaElement.removeAttribute('placeholder');\n }\n this._cacheTextareaPlaceholderHeight();\n }\n constructor(_elementRef, _platform, _ngZone, \n /** @breaking-change 11.0.0 make document required */\n document) {\n this._elementRef = _elementRef;\n this._platform = _platform;\n this._ngZone = _ngZone;\n this._destroyed = new Subject();\n this._enabled = true;\n /**\n * Value of minRows as of last resize. If the minRows has decreased, the\n * height of the textarea needs to be recomputed to reflect the new minimum. The maxHeight\n * does not have the same problem because it does not affect the textarea's scrollHeight.\n */\n this._previousMinRows = -1;\n this._isViewInited = false;\n /** Handles `focus` and `blur` events. */\n this._handleFocusEvent = (event) => {\n this._hasFocus = event.type === 'focus';\n };\n this._document = document;\n this._textareaElement = this._elementRef.nativeElement;\n }\n /** Sets the minimum height of the textarea as determined by minRows. */\n _setMinHeight() {\n const minHeight = this.minRows && this._cachedLineHeight ? `${this.minRows * this._cachedLineHeight}px` : null;\n if (minHeight) {\n this._textareaElement.style.minHeight = minHeight;\n }\n }\n /** Sets the maximum height of the textarea as determined by maxRows. */\n _setMaxHeight() {\n const maxHeight = this.maxRows && this._cachedLineHeight ? `${this.maxRows * this._cachedLineHeight}px` : null;\n if (maxHeight) {\n this._textareaElement.style.maxHeight = maxHeight;\n }\n }\n ngAfterViewInit() {\n if (this._platform.isBrowser) {\n // Remember the height which we started with in case autosizing is disabled\n this._initialHeight = this._textareaElement.style.height;\n this.resizeToFitContent();\n this._ngZone.runOutsideAngular(() => {\n const window = this._getWindow();\n fromEvent(window, 'resize')\n .pipe(auditTime(16), takeUntil(this._destroyed))\n .subscribe(() => this.resizeToFitContent(true));\n this._textareaElement.addEventListener('focus', this._handleFocusEvent);\n this._textareaElement.addEventListener('blur', this._handleFocusEvent);\n });\n this._isViewInited = true;\n this.resizeToFitContent(true);\n }\n }\n ngOnDestroy() {\n this._textareaElement.removeEventListener('focus', this._handleFocusEvent);\n this._textareaElement.removeEventListener('blur', this._handleFocusEvent);\n this._destroyed.next();\n this._destroyed.complete();\n }\n /**\n * Cache the height of a single-row textarea if it has not already been cached.\n *\n * We need to know how large a single \"row\" of a textarea is in order to apply minRows and\n * maxRows. For the initial version, we will assume that the height of a single line in the\n * textarea does not ever change.\n */\n _cacheTextareaLineHeight() {\n if (this._cachedLineHeight) {\n return;\n }\n // Use a clone element because we have to override some styles.\n let textareaClone = this._textareaElement.cloneNode(false);\n textareaClone.rows = 1;\n // Use `position: absolute` so that this doesn't cause a browser layout and use\n // `visibility: hidden` so that nothing is rendered. Clear any other styles that\n // would affect the height.\n textareaClone.style.position = 'absolute';\n textareaClone.style.visibility = 'hidden';\n textareaClone.style.border = 'none';\n textareaClone.style.padding = '0';\n textareaClone.style.height = '';\n textareaClone.style.minHeight = '';\n textareaClone.style.maxHeight = '';\n // In Firefox it happens that textarea elements are always bigger than the specified amount\n // of rows. This is because Firefox tries to add extra space for the horizontal scrollbar.\n // As a workaround that removes the extra space for the scrollbar, we can just set overflow\n // to hidden. This ensures that there is no invalid calculation of the line height.\n // See Firefox bug report: https://bugzilla.mozilla.org/show_bug.cgi?id=33654\n textareaClone.style.overflow = 'hidden';\n this._textareaElement.parentNode.appendChild(textareaClone);\n this._cachedLineHeight = textareaClone.clientHeight;\n textareaClone.remove();\n // Min and max heights have to be re-calculated if the cached line height changes\n this._setMinHeight();\n this._setMaxHeight();\n }\n _measureScrollHeight() {\n const element = this._textareaElement;\n const previousMargin = element.style.marginBottom || '';\n const isFirefox = this._platform.FIREFOX;\n const needsMarginFiller = isFirefox && this._hasFocus;\n const measuringClass = isFirefox\n ? 'cdk-textarea-autosize-measuring-firefox'\n : 'cdk-textarea-autosize-measuring';\n // In some cases the page might move around while we're measuring the `textarea` on Firefox. We\n // work around it by assigning a temporary margin with the same height as the `textarea` so that\n // it occupies the same amount of space. See #23233.\n if (needsMarginFiller) {\n element.style.marginBottom = `${element.clientHeight}px`;\n }\n // Reset the textarea height to auto in order to shrink back to its default size.\n // Also temporarily force overflow:hidden, so scroll bars do not interfere with calculations.\n element.classList.add(measuringClass);\n // The measuring class includes a 2px padding to workaround an issue with Chrome,\n // so we account for that extra space here by subtracting 4 (2px top + 2px bottom).\n const scrollHeight = element.scrollHeight - 4;\n element.classList.remove(measuringClass);\n if (needsMarginFiller) {\n element.style.marginBottom = previousMargin;\n }\n return scrollHeight;\n }\n _cacheTextareaPlaceholderHeight() {\n if (!this._isViewInited || this._cachedPlaceholderHeight != undefined) {\n return;\n }\n if (!this.placeholder) {\n this._cachedPlaceholderHeight = 0;\n return;\n }\n const value = this._textareaElement.value;\n this._textareaElement.value = this._textareaElement.placeholder;\n this._cachedPlaceholderHeight = this._measureScrollHeight();\n this._textareaElement.value = value;\n }\n ngDoCheck() {\n if (this._platform.isBrowser) {\n this.resizeToFitContent();\n }\n }\n /**\n * Resize the textarea to fit its content.\n * @param force Whether to force a height recalculation. By default the height will be\n * recalculated only if the value changed since the last call.\n */\n resizeToFitContent(force = false) {\n // If autosizing is disabled, just skip everything else\n if (!this._enabled) {\n return;\n }\n this._cacheTextareaLineHeight();\n this._cacheTextareaPlaceholderHeight();\n // If we haven't determined the line-height yet, we know we're still hidden and there's no point\n // in checking the height of the textarea.\n if (!this._cachedLineHeight) {\n return;\n }\n const textarea = this._elementRef.nativeElement;\n const value = textarea.value;\n // Only resize if the value or minRows have changed since these calculations can be expensive.\n if (!force && this._minRows === this._previousMinRows && value === this._previousValue) {\n return;\n }\n const scrollHeight = this._measureScrollHeight();\n const height = Math.max(scrollHeight, this._cachedPlaceholderHeight || 0);\n // Use the scrollHeight to know how large the textarea *would* be if fit its entire value.\n textarea.style.height = `${height}px`;\n this._ngZone.runOutsideAngular(() => {\n if (typeof requestAnimationFrame !== 'undefined') {\n requestAnimationFrame(() => this._scrollToCaretPosition(textarea));\n }\n else {\n setTimeout(() => this._scrollToCaretPosition(textarea));\n }\n });\n this._previousValue = value;\n this._previousMinRows = this._minRows;\n }\n /**\n * Resets the textarea to its original size\n */\n reset() {\n // Do not try to change the textarea, if the initialHeight has not been determined yet\n // This might potentially remove styles when reset() is called before ngAfterViewInit\n if (this._initialHeight !== undefined) {\n this._textareaElement.style.height = this._initialHeight;\n }\n }\n _noopInputHandler() {\n // no-op handler that ensures we're running change detection on input events.\n }\n /** Access injected document if available or fallback to global document reference */\n _getDocument() {\n return this._document || document;\n }\n /** Use defaultView of injected document if available or fallback to global window reference */\n _getWindow() {\n const doc = this._getDocument();\n return doc.defaultView || window;\n }\n /**\n * Scrolls a textarea to the caret position. On Firefox resizing the textarea will\n * prevent it from scrolling to the caret position. We need to re-set the selection\n * in order for it to scroll to the proper position.\n */\n _scrollToCaretPosition(textarea) {\n const { selectionStart, selectionEnd } = textarea;\n // IE will throw an \"Unspecified error\" if we try to set the selection range after the\n // element has been removed from the DOM. Assert that the directive hasn't been destroyed\n // between the time we requested the animation frame and when it was executed.\n // Also note that we have to assert that the textarea is focused before we set the\n // selection range. Setting the selection range on a non-focused textarea will cause\n // it to receive focus on IE and Edge.\n if (!this._destroyed.isStopped && this._hasFocus) {\n textarea.setSelectionRange(selectionStart, selectionEnd);\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkTextareaAutosize, deps: [{ token: i0.ElementRef }, { token: i1.Platform }, { token: i0.NgZone }, { token: DOCUMENT, optional: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.0\", type: CdkTextareaAutosize, selector: \"textarea[cdkTextareaAutosize]\", inputs: { minRows: [\"cdkAutosizeMinRows\", \"minRows\"], maxRows: [\"cdkAutosizeMaxRows\", \"maxRows\"], enabled: [\"cdkTextareaAutosize\", \"enabled\"], placeholder: \"placeholder\" }, host: { attributes: { \"rows\": \"1\" }, listeners: { \"input\": \"_noopInputHandler()\" }, classAttribute: \"cdk-textarea-autosize\" }, exportAs: [\"cdkTextareaAutosize\"], ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: CdkTextareaAutosize, decorators: [{\n type: Directive,\n args: [{\n selector: 'textarea[cdkTextareaAutosize]',\n exportAs: 'cdkTextareaAutosize',\n host: {\n 'class': 'cdk-textarea-autosize',\n // Textarea elements that have the directive applied should have a single row by default.\n // Browsers normally show two rows by default and therefore this limits the minRows binding.\n 'rows': '1',\n '(input)': '_noopInputHandler()',\n },\n }]\n }], ctorParameters: function () { return [{ type: i0.ElementRef }, { type: i1.Platform }, { type: i0.NgZone }, { type: undefined, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [DOCUMENT]\n }] }]; }, propDecorators: { minRows: [{\n type: Input,\n args: ['cdkAutosizeMinRows']\n }], maxRows: [{\n type: Input,\n args: ['cdkAutosizeMaxRows']\n }], enabled: [{\n type: Input,\n args: ['cdkTextareaAutosize']\n }], placeholder: [{\n type: Input\n }] } });\n\nclass TextFieldModule {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: TextFieldModule, deps: [], target: i0.ɵɵFactoryTarget.NgModule }); }\n static { this.ɵmod = i0.ɵɵngDeclareNgModule({ minVersion: \"14.0.0\", version: \"16.0.0\", ngImport: i0, type: TextFieldModule, declarations: [CdkAutofill, CdkTextareaAutosize], exports: [CdkAutofill, CdkTextareaAutosize] }); }\n static { this.ɵinj = i0.ɵɵngDeclareInjector({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: TextFieldModule }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.0\", ngImport: i0, type: TextFieldModule, decorators: [{\n type: NgModule,\n args: [{\n declarations: [CdkAutofill, CdkTextareaAutosize],\n exports: [CdkAutofill, CdkTextareaAutosize],\n }]\n }] });\n\n/**\n * Generated bundle index. Do not edit.\n */\n\nexport { AutofillMonitor, CdkAutofill, CdkTextareaAutosize, TextFieldModule };\n","/**\n * @license Angular v16.0.1\n * (c) 2010-2022 Google LLC. https://angular.io/\n * License: MIT\n */\n\nimport * as i0 from '@angular/core';\nimport { InjectionToken, inject, Injectable, Optional, Inject, EventEmitter, ɵɵinject, ɵfindLocaleData, ɵLocaleDataIndex, ɵgetLocaleCurrencyCode, ɵgetLocalePluralCase, LOCALE_ID, ɵregisterLocaleData, ɵstringify, Directive, Input, createNgModule, NgModuleRef, ɵRuntimeError, Host, Attribute, RendererStyleFlags2, ɵisPromise, ɵisSubscribable, Pipe, DEFAULT_CURRENCY_CODE, NgModule, Version, ɵɵdefineInjectable, ɵformatRuntimeError, Renderer2, ElementRef, Injector, PLATFORM_ID, NgZone } from '@angular/core';\n\nlet _DOM = null;\nfunction getDOM() {\n return _DOM;\n}\nfunction setRootDomAdapter(adapter) {\n if (!_DOM) {\n _DOM = adapter;\n }\n}\n/* tslint:disable:requireParameterType */\n/**\n * Provides DOM operations in an environment-agnostic way.\n *\n * @security Tread carefully! Interacting with the DOM directly is dangerous and\n * can introduce XSS risks.\n */\nclass DomAdapter {\n}\n\n/**\n * A DI Token representing the main rendering context.\n * In a browser and SSR this is the DOM Document.\n * When using SSR, that document is created by [Domino](https://github.com/angular/domino).\n *\n * @publicApi\n */\nconst DOCUMENT = new InjectionToken('DocumentToken');\n\n/**\n * This class should not be used directly by an application developer. Instead, use\n * {@link Location}.\n *\n * `PlatformLocation` encapsulates all calls to DOM APIs, which allows the Router to be\n * platform-agnostic.\n * This means that we can have different implementation of `PlatformLocation` for the different\n * platforms that Angular supports. For example, `@angular/platform-browser` provides an\n * implementation specific to the browser environment, while `@angular/platform-server` provides\n * one suitable for use with server-side rendering.\n *\n * The `PlatformLocation` class is used directly by all implementations of {@link LocationStrategy}\n * when they need to interact with the DOM APIs like pushState, popState, etc.\n *\n * {@link LocationStrategy} in turn is used by the {@link Location} service which is used directly\n * by the {@link Router} in order to navigate between routes. Since all interactions between {@link\n * Router} /\n * {@link Location} / {@link LocationStrategy} and DOM APIs flow through the `PlatformLocation`\n * class, they are all platform-agnostic.\n *\n * @publicApi\n */\nclass PlatformLocation {\n historyGo(relativePosition) {\n throw new Error('Not implemented');\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PlatformLocation, deps: [], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PlatformLocation, providedIn: 'platform', useFactory: () => inject(BrowserPlatformLocation) }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PlatformLocation, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'platform', useFactory: () => inject(BrowserPlatformLocation) }]\n }] });\n/**\n * @description\n * Indicates when a location is initialized.\n *\n * @publicApi\n */\nconst LOCATION_INITIALIZED = new InjectionToken('Location Initialized');\n/**\n * `PlatformLocation` encapsulates all of the direct calls to platform APIs.\n * This class should not be used directly by an application developer. Instead, use\n * {@link Location}.\n *\n * @publicApi\n */\nclass BrowserPlatformLocation extends PlatformLocation {\n constructor() {\n super();\n this._doc = inject(DOCUMENT);\n this._location = window.location;\n this._history = window.history;\n }\n getBaseHrefFromDOM() {\n return getDOM().getBaseHref(this._doc);\n }\n onPopState(fn) {\n const window = getDOM().getGlobalEventTarget(this._doc, 'window');\n window.addEventListener('popstate', fn, false);\n return () => window.removeEventListener('popstate', fn);\n }\n onHashChange(fn) {\n const window = getDOM().getGlobalEventTarget(this._doc, 'window');\n window.addEventListener('hashchange', fn, false);\n return () => window.removeEventListener('hashchange', fn);\n }\n get href() {\n return this._location.href;\n }\n get protocol() {\n return this._location.protocol;\n }\n get hostname() {\n return this._location.hostname;\n }\n get port() {\n return this._location.port;\n }\n get pathname() {\n return this._location.pathname;\n }\n get search() {\n return this._location.search;\n }\n get hash() {\n return this._location.hash;\n }\n set pathname(newPath) {\n this._location.pathname = newPath;\n }\n pushState(state, title, url) {\n this._history.pushState(state, title, url);\n }\n replaceState(state, title, url) {\n this._history.replaceState(state, title, url);\n }\n forward() {\n this._history.forward();\n }\n back() {\n this._history.back();\n }\n historyGo(relativePosition = 0) {\n this._history.go(relativePosition);\n }\n getState() {\n return this._history.state;\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: BrowserPlatformLocation, deps: [], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: BrowserPlatformLocation, providedIn: 'platform', useFactory: () => new BrowserPlatformLocation() }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: BrowserPlatformLocation, decorators: [{\n type: Injectable,\n args: [{\n providedIn: 'platform',\n useFactory: () => new BrowserPlatformLocation(),\n }]\n }], ctorParameters: function () { return []; } });\n\n/**\n * Joins two parts of a URL with a slash if needed.\n *\n * @param start URL string\n * @param end URL string\n *\n *\n * @returns The joined URL string.\n */\nfunction joinWithSlash(start, end) {\n if (start.length == 0) {\n return end;\n }\n if (end.length == 0) {\n return start;\n }\n let slashes = 0;\n if (start.endsWith('/')) {\n slashes++;\n }\n if (end.startsWith('/')) {\n slashes++;\n }\n if (slashes == 2) {\n return start + end.substring(1);\n }\n if (slashes == 1) {\n return start + end;\n }\n return start + '/' + end;\n}\n/**\n * Removes a trailing slash from a URL string if needed.\n * Looks for the first occurrence of either `#`, `?`, or the end of the\n * line as `/` characters and removes the trailing slash if one exists.\n *\n * @param url URL string.\n *\n * @returns The URL string, modified if needed.\n */\nfunction stripTrailingSlash(url) {\n const match = url.match(/#|\\?|$/);\n const pathEndIdx = match && match.index || url.length;\n const droppedSlashIdx = pathEndIdx - (url[pathEndIdx - 1] === '/' ? 1 : 0);\n return url.slice(0, droppedSlashIdx) + url.slice(pathEndIdx);\n}\n/**\n * Normalizes URL parameters by prepending with `?` if needed.\n *\n * @param params String of URL parameters.\n *\n * @returns The normalized URL parameters string.\n */\nfunction normalizeQueryParams(params) {\n return params && params[0] !== '?' ? '?' + params : params;\n}\n\n/**\n * Enables the `Location` service to read route state from the browser's URL.\n * Angular provides two strategies:\n * `HashLocationStrategy` and `PathLocationStrategy`.\n *\n * Applications should use the `Router` or `Location` services to\n * interact with application route state.\n *\n * For instance, `HashLocationStrategy` produces URLs like\n *
http://example.com#/foo,\n * and `PathLocationStrategy` produces\n *
http://example.com/foo as an equivalent URL.\n *\n * See these two classes for more.\n *\n * @publicApi\n */\nclass LocationStrategy {\n historyGo(relativePosition) {\n throw new Error('Not implemented');\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LocationStrategy, deps: [], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LocationStrategy, providedIn: 'root', useFactory: () => inject(PathLocationStrategy) }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LocationStrategy, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root', useFactory: () => inject(PathLocationStrategy) }]\n }] });\n/**\n * A predefined [DI token](guide/glossary#di-token) for the base href\n * to be used with the `PathLocationStrategy`.\n * The base href is the URL prefix that should be preserved when generating\n * and recognizing URLs.\n *\n * @usageNotes\n *\n * The following example shows how to use this token to configure the root app injector\n * with a base href value, so that the DI framework can supply the dependency anywhere in the app.\n *\n * ```typescript\n * import {Component, NgModule} from '@angular/core';\n * import {APP_BASE_HREF} from '@angular/common';\n *\n * @NgModule({\n * providers: [{provide: APP_BASE_HREF, useValue: '/my/app'}]\n * })\n * class AppModule {}\n * ```\n *\n * @publicApi\n */\nconst APP_BASE_HREF = new InjectionToken('appBaseHref');\n/**\n * @description\n * A {@link LocationStrategy} used to configure the {@link Location} service to\n * represent its state in the\n * [path](https://en.wikipedia.org/wiki/Uniform_Resource_Locator#Syntax) of the\n * browser's URL.\n *\n * If you're using `PathLocationStrategy`, you may provide a {@link APP_BASE_HREF}\n * or add a `
` element to the document to override the default.\n *\n * For instance, if you provide an `APP_BASE_HREF` of `'/my/app/'` and call\n * `location.go('/foo')`, the browser's URL will become\n * `example.com/my/app/foo`. To ensure all relative URIs resolve correctly,\n * the `
` and/or `APP_BASE_HREF` should end with a `/`.\n *\n * Similarly, if you add `
` to the document and call\n * `location.go('/foo')`, the browser's URL will become\n * `example.com/my/app/foo`.\n *\n * Note that when using `PathLocationStrategy`, neither the query nor\n * the fragment in the `
` will be preserved, as outlined\n * by the [RFC](https://tools.ietf.org/html/rfc3986#section-5.2.2).\n *\n * @usageNotes\n *\n * ### Example\n *\n * {@example common/location/ts/path_location_component.ts region='LocationComponent'}\n *\n * @publicApi\n */\nclass PathLocationStrategy extends LocationStrategy {\n constructor(_platformLocation, href) {\n super();\n this._platformLocation = _platformLocation;\n this._removeListenerFns = [];\n this._baseHref = href ?? this._platformLocation.getBaseHrefFromDOM() ??\n inject(DOCUMENT).location?.origin ?? '';\n }\n /** @nodoc */\n ngOnDestroy() {\n while (this._removeListenerFns.length) {\n this._removeListenerFns.pop()();\n }\n }\n onPopState(fn) {\n this._removeListenerFns.push(this._platformLocation.onPopState(fn), this._platformLocation.onHashChange(fn));\n }\n getBaseHref() {\n return this._baseHref;\n }\n prepareExternalUrl(internal) {\n return joinWithSlash(this._baseHref, internal);\n }\n path(includeHash = false) {\n const pathname = this._platformLocation.pathname + normalizeQueryParams(this._platformLocation.search);\n const hash = this._platformLocation.hash;\n return hash && includeHash ? `${pathname}${hash}` : pathname;\n }\n pushState(state, title, url, queryParams) {\n const externalUrl = this.prepareExternalUrl(url + normalizeQueryParams(queryParams));\n this._platformLocation.pushState(state, title, externalUrl);\n }\n replaceState(state, title, url, queryParams) {\n const externalUrl = this.prepareExternalUrl(url + normalizeQueryParams(queryParams));\n this._platformLocation.replaceState(state, title, externalUrl);\n }\n forward() {\n this._platformLocation.forward();\n }\n back() {\n this._platformLocation.back();\n }\n getState() {\n return this._platformLocation.getState();\n }\n historyGo(relativePosition = 0) {\n this._platformLocation.historyGo?.(relativePosition);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PathLocationStrategy, deps: [{ token: PlatformLocation }, { token: APP_BASE_HREF, optional: true }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PathLocationStrategy, providedIn: 'root' }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PathLocationStrategy, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root' }]\n }], ctorParameters: function () { return [{ type: PlatformLocation }, { type: undefined, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [APP_BASE_HREF]\n }] }]; } });\n\n/**\n * @description\n * A {@link LocationStrategy} used to configure the {@link Location} service to\n * represent its state in the\n * [hash fragment](https://en.wikipedia.org/wiki/Uniform_Resource_Locator#Syntax)\n * of the browser's URL.\n *\n * For instance, if you call `location.go('/foo')`, the browser's URL will become\n * `example.com#/foo`.\n *\n * @usageNotes\n *\n * ### Example\n *\n * {@example common/location/ts/hash_location_component.ts region='LocationComponent'}\n *\n * @publicApi\n */\nclass HashLocationStrategy extends LocationStrategy {\n constructor(_platformLocation, _baseHref) {\n super();\n this._platformLocation = _platformLocation;\n this._baseHref = '';\n this._removeListenerFns = [];\n if (_baseHref != null) {\n this._baseHref = _baseHref;\n }\n }\n /** @nodoc */\n ngOnDestroy() {\n while (this._removeListenerFns.length) {\n this._removeListenerFns.pop()();\n }\n }\n onPopState(fn) {\n this._removeListenerFns.push(this._platformLocation.onPopState(fn), this._platformLocation.onHashChange(fn));\n }\n getBaseHref() {\n return this._baseHref;\n }\n path(includeHash = false) {\n // the hash value is always prefixed with a `#`\n // and if it is empty then it will stay empty\n let path = this._platformLocation.hash;\n if (path == null)\n path = '#';\n return path.length > 0 ? path.substring(1) : path;\n }\n prepareExternalUrl(internal) {\n const url = joinWithSlash(this._baseHref, internal);\n return url.length > 0 ? ('#' + url) : url;\n }\n pushState(state, title, path, queryParams) {\n let url = this.prepareExternalUrl(path + normalizeQueryParams(queryParams));\n if (url.length == 0) {\n url = this._platformLocation.pathname;\n }\n this._platformLocation.pushState(state, title, url);\n }\n replaceState(state, title, path, queryParams) {\n let url = this.prepareExternalUrl(path + normalizeQueryParams(queryParams));\n if (url.length == 0) {\n url = this._platformLocation.pathname;\n }\n this._platformLocation.replaceState(state, title, url);\n }\n forward() {\n this._platformLocation.forward();\n }\n back() {\n this._platformLocation.back();\n }\n getState() {\n return this._platformLocation.getState();\n }\n historyGo(relativePosition = 0) {\n this._platformLocation.historyGo?.(relativePosition);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HashLocationStrategy, deps: [{ token: PlatformLocation }, { token: APP_BASE_HREF, optional: true }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HashLocationStrategy }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HashLocationStrategy, decorators: [{\n type: Injectable\n }], ctorParameters: function () { return [{ type: PlatformLocation }, { type: undefined, decorators: [{\n type: Optional\n }, {\n type: Inject,\n args: [APP_BASE_HREF]\n }] }]; } });\n\n/**\n * @description\n *\n * A service that applications can use to interact with a browser's URL.\n *\n * Depending on the `LocationStrategy` used, `Location` persists\n * to the URL's path or the URL's hash segment.\n *\n * @usageNotes\n *\n * It's better to use the `Router.navigate()` service to trigger route changes. Use\n * `Location` only if you need to interact with or create normalized URLs outside of\n * routing.\n *\n * `Location` is responsible for normalizing the URL against the application's base href.\n * A normalized URL is absolute from the URL host, includes the application's base href, and has no\n * trailing slash:\n * - `/my/app/user/123` is normalized\n * - `my/app/user/123` **is not** normalized\n * - `/my/app/user/123/` **is not** normalized\n *\n * ### Example\n *\n *
\n *\n * @publicApi\n */\nclass Location {\n constructor(locationStrategy) {\n /** @internal */\n this._subject = new EventEmitter();\n /** @internal */\n this._urlChangeListeners = [];\n /** @internal */\n this._urlChangeSubscription = null;\n this._locationStrategy = locationStrategy;\n const baseHref = this._locationStrategy.getBaseHref();\n // Note: This class's interaction with base HREF does not fully follow the rules\n // outlined in the spec https://www.freesoft.org/CIE/RFC/1808/18.htm.\n // Instead of trying to fix individual bugs with more and more code, we should\n // investigate using the URL constructor and providing the base as a second\n // argument.\n // https://developer.mozilla.org/en-US/docs/Web/API/URL/URL#parameters\n this._basePath = _stripOrigin(stripTrailingSlash(_stripIndexHtml(baseHref)));\n this._locationStrategy.onPopState((ev) => {\n this._subject.emit({\n 'url': this.path(true),\n 'pop': true,\n 'state': ev.state,\n 'type': ev.type,\n });\n });\n }\n /** @nodoc */\n ngOnDestroy() {\n this._urlChangeSubscription?.unsubscribe();\n this._urlChangeListeners = [];\n }\n /**\n * Normalizes the URL path for this location.\n *\n * @param includeHash True to include an anchor fragment in the path.\n *\n * @returns The normalized URL path.\n */\n // TODO: vsavkin. Remove the boolean flag and always include hash once the deprecated router is\n // removed.\n path(includeHash = false) {\n return this.normalize(this._locationStrategy.path(includeHash));\n }\n /**\n * Reports the current state of the location history.\n * @returns The current value of the `history.state` object.\n */\n getState() {\n return this._locationStrategy.getState();\n }\n /**\n * Normalizes the given path and compares to the current normalized path.\n *\n * @param path The given URL path.\n * @param query Query parameters.\n *\n * @returns True if the given URL path is equal to the current normalized path, false\n * otherwise.\n */\n isCurrentPathEqualTo(path, query = '') {\n return this.path() == this.normalize(path + normalizeQueryParams(query));\n }\n /**\n * Normalizes a URL path by stripping any trailing slashes.\n *\n * @param url String representing a URL.\n *\n * @returns The normalized URL string.\n */\n normalize(url) {\n return Location.stripTrailingSlash(_stripBasePath(this._basePath, _stripIndexHtml(url)));\n }\n /**\n * Normalizes an external URL path.\n * If the given URL doesn't begin with a leading slash (`'/'`), adds one\n * before normalizing. Adds a hash if `HashLocationStrategy` is\n * in use, or the `APP_BASE_HREF` if the `PathLocationStrategy` is in use.\n *\n * @param url String representing a URL.\n *\n * @returns A normalized platform-specific URL.\n */\n prepareExternalUrl(url) {\n if (url && url[0] !== '/') {\n url = '/' + url;\n }\n return this._locationStrategy.prepareExternalUrl(url);\n }\n // TODO: rename this method to pushState\n /**\n * Changes the browser's URL to a normalized version of a given URL, and pushes a\n * new item onto the platform's history.\n *\n * @param path URL path to normalize.\n * @param query Query parameters.\n * @param state Location history state.\n *\n */\n go(path, query = '', state = null) {\n this._locationStrategy.pushState(state, '', path, query);\n this._notifyUrlChangeListeners(this.prepareExternalUrl(path + normalizeQueryParams(query)), state);\n }\n /**\n * Changes the browser's URL to a normalized version of the given URL, and replaces\n * the top item on the platform's history stack.\n *\n * @param path URL path to normalize.\n * @param query Query parameters.\n * @param state Location history state.\n */\n replaceState(path, query = '', state = null) {\n this._locationStrategy.replaceState(state, '', path, query);\n this._notifyUrlChangeListeners(this.prepareExternalUrl(path + normalizeQueryParams(query)), state);\n }\n /**\n * Navigates forward in the platform's history.\n */\n forward() {\n this._locationStrategy.forward();\n }\n /**\n * Navigates back in the platform's history.\n */\n back() {\n this._locationStrategy.back();\n }\n /**\n * Navigate to a specific page from session history, identified by its relative position to the\n * current page.\n *\n * @param relativePosition Position of the target page in the history relative to the current\n * page.\n * A negative value moves backwards, a positive value moves forwards, e.g. `location.historyGo(2)`\n * moves forward two pages and `location.historyGo(-2)` moves back two pages. When we try to go\n * beyond what's stored in the history session, we stay in the current page. Same behaviour occurs\n * when `relativePosition` equals 0.\n * @see https://developer.mozilla.org/en-US/docs/Web/API/History_API#Moving_to_a_specific_point_in_history\n */\n historyGo(relativePosition = 0) {\n this._locationStrategy.historyGo?.(relativePosition);\n }\n /**\n * Registers a URL change listener. Use to catch updates performed by the Angular\n * framework that are not detectible through \"popstate\" or \"hashchange\" events.\n *\n * @param fn The change handler function, which take a URL and a location history state.\n * @returns A function that, when executed, unregisters a URL change listener.\n */\n onUrlChange(fn) {\n this._urlChangeListeners.push(fn);\n if (!this._urlChangeSubscription) {\n this._urlChangeSubscription = this.subscribe(v => {\n this._notifyUrlChangeListeners(v.url, v.state);\n });\n }\n return () => {\n const fnIndex = this._urlChangeListeners.indexOf(fn);\n this._urlChangeListeners.splice(fnIndex, 1);\n if (this._urlChangeListeners.length === 0) {\n this._urlChangeSubscription?.unsubscribe();\n this._urlChangeSubscription = null;\n }\n };\n }\n /** @internal */\n _notifyUrlChangeListeners(url = '', state) {\n this._urlChangeListeners.forEach(fn => fn(url, state));\n }\n /**\n * Subscribes to the platform's `popState` events.\n *\n * Note: `Location.go()` does not trigger the `popState` event in the browser. Use\n * `Location.onUrlChange()` to subscribe to URL changes instead.\n *\n * @param value Event that is triggered when the state history changes.\n * @param exception The exception to throw.\n *\n * @see [onpopstate](https://developer.mozilla.org/en-US/docs/Web/API/WindowEventHandlers/onpopstate)\n *\n * @returns Subscribed events.\n */\n subscribe(onNext, onThrow, onReturn) {\n return this._subject.subscribe({ next: onNext, error: onThrow, complete: onReturn });\n }\n /**\n * Normalizes URL parameters by prepending with `?` if needed.\n *\n * @param params String of URL parameters.\n *\n * @returns The normalized URL parameters string.\n */\n static { this.normalizeQueryParams = normalizeQueryParams; }\n /**\n * Joins two parts of a URL with a slash if needed.\n *\n * @param start URL string\n * @param end URL string\n *\n *\n * @returns The joined URL string.\n */\n static { this.joinWithSlash = joinWithSlash; }\n /**\n * Removes a trailing slash from a URL string if needed.\n * Looks for the first occurrence of either `#`, `?`, or the end of the\n * line as `/` characters and removes the trailing slash if one exists.\n *\n * @param url URL string.\n *\n * @returns The URL string, modified if needed.\n */\n static { this.stripTrailingSlash = stripTrailingSlash; }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: Location, deps: [{ token: LocationStrategy }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: Location, providedIn: 'root', useFactory: createLocation }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: Location, decorators: [{\n type: Injectable,\n args: [{\n providedIn: 'root',\n // See #23917\n useFactory: createLocation,\n }]\n }], ctorParameters: function () { return [{ type: LocationStrategy }]; } });\nfunction createLocation() {\n return new Location(ɵɵinject(LocationStrategy));\n}\nfunction _stripBasePath(basePath, url) {\n if (!basePath || !url.startsWith(basePath)) {\n return url;\n }\n const strippedUrl = url.substring(basePath.length);\n if (strippedUrl === '' || ['/', ';', '?', '#'].includes(strippedUrl[0])) {\n return strippedUrl;\n }\n return url;\n}\nfunction _stripIndexHtml(url) {\n return url.replace(/\\/index.html$/, '');\n}\nfunction _stripOrigin(baseHref) {\n // DO NOT REFACTOR! Previously, this check looked like this:\n // `/^(https?:)?\\/\\//.test(baseHref)`, but that resulted in\n // syntactically incorrect code after Closure Compiler minification.\n // This was likely caused by a bug in Closure Compiler, but\n // for now, the check is rewritten to use `new RegExp` instead.\n const isAbsoluteUrl = (new RegExp('^(https?:)?//')).test(baseHref);\n if (isAbsoluteUrl) {\n const [, pathname] = baseHref.split(/\\/\\/[^\\/]+/);\n return pathname;\n }\n return baseHref;\n}\n\n/** @internal */\nconst CURRENCIES_EN = { \"ADP\": [undefined, undefined, 0], \"AFN\": [undefined, \"؋\", 0], \"ALL\": [undefined, undefined, 0], \"AMD\": [undefined, \"֏\", 2], \"AOA\": [undefined, \"Kz\"], \"ARS\": [undefined, \"$\"], \"AUD\": [\"A$\", \"$\"], \"AZN\": [undefined, \"₼\"], \"BAM\": [undefined, \"KM\"], \"BBD\": [undefined, \"$\"], \"BDT\": [undefined, \"৳\"], \"BHD\": [undefined, undefined, 3], \"BIF\": [undefined, undefined, 0], \"BMD\": [undefined, \"$\"], \"BND\": [undefined, \"$\"], \"BOB\": [undefined, \"Bs\"], \"BRL\": [\"R$\"], \"BSD\": [undefined, \"$\"], \"BWP\": [undefined, \"P\"], \"BYN\": [undefined, undefined, 2], \"BYR\": [undefined, undefined, 0], \"BZD\": [undefined, \"$\"], \"CAD\": [\"CA$\", \"$\", 2], \"CHF\": [undefined, undefined, 2], \"CLF\": [undefined, undefined, 4], \"CLP\": [undefined, \"$\", 0], \"CNY\": [\"CN¥\", \"¥\"], \"COP\": [undefined, \"$\", 2], \"CRC\": [undefined, \"₡\", 2], \"CUC\": [undefined, \"$\"], \"CUP\": [undefined, \"$\"], \"CZK\": [undefined, \"Kč\", 2], \"DJF\": [undefined, undefined, 0], \"DKK\": [undefined, \"kr\", 2], \"DOP\": [undefined, \"$\"], \"EGP\": [undefined, \"E£\"], \"ESP\": [undefined, \"₧\", 0], \"EUR\": [\"€\"], \"FJD\": [undefined, \"$\"], \"FKP\": [undefined, \"£\"], \"GBP\": [\"£\"], \"GEL\": [undefined, \"₾\"], \"GHS\": [undefined, \"GH₵\"], \"GIP\": [undefined, \"£\"], \"GNF\": [undefined, \"FG\", 0], \"GTQ\": [undefined, \"Q\"], \"GYD\": [undefined, \"$\", 2], \"HKD\": [\"HK$\", \"$\"], \"HNL\": [undefined, \"L\"], \"HRK\": [undefined, \"kn\"], \"HUF\": [undefined, \"Ft\", 2], \"IDR\": [undefined, \"Rp\", 2], \"ILS\": [\"₪\"], \"INR\": [\"₹\"], \"IQD\": [undefined, undefined, 0], \"IRR\": [undefined, undefined, 0], \"ISK\": [undefined, \"kr\", 0], \"ITL\": [undefined, undefined, 0], \"JMD\": [undefined, \"$\"], \"JOD\": [undefined, undefined, 3], \"JPY\": [\"¥\", undefined, 0], \"KHR\": [undefined, \"៛\"], \"KMF\": [undefined, \"CF\", 0], \"KPW\": [undefined, \"₩\", 0], \"KRW\": [\"₩\", undefined, 0], \"KWD\": [undefined, undefined, 3], \"KYD\": [undefined, \"$\"], \"KZT\": [undefined, \"₸\"], \"LAK\": [undefined, \"₭\", 0], \"LBP\": [undefined, \"L£\", 0], \"LKR\": [undefined, \"Rs\"], \"LRD\": [undefined, \"$\"], \"LTL\": [undefined, \"Lt\"], \"LUF\": [undefined, undefined, 0], \"LVL\": [undefined, \"Ls\"], \"LYD\": [undefined, undefined, 3], \"MGA\": [undefined, \"Ar\", 0], \"MGF\": [undefined, undefined, 0], \"MMK\": [undefined, \"K\", 0], \"MNT\": [undefined, \"₮\", 2], \"MRO\": [undefined, undefined, 0], \"MUR\": [undefined, \"Rs\", 2], \"MXN\": [\"MX$\", \"$\"], \"MYR\": [undefined, \"RM\"], \"NAD\": [undefined, \"$\"], \"NGN\": [undefined, \"₦\"], \"NIO\": [undefined, \"C$\"], \"NOK\": [undefined, \"kr\", 2], \"NPR\": [undefined, \"Rs\"], \"NZD\": [\"NZ$\", \"$\"], \"OMR\": [undefined, undefined, 3], \"PHP\": [\"₱\"], \"PKR\": [undefined, \"Rs\", 2], \"PLN\": [undefined, \"zł\"], \"PYG\": [undefined, \"₲\", 0], \"RON\": [undefined, \"lei\"], \"RSD\": [undefined, undefined, 0], \"RUB\": [undefined, \"₽\"], \"RWF\": [undefined, \"RF\", 0], \"SBD\": [undefined, \"$\"], \"SEK\": [undefined, \"kr\", 2], \"SGD\": [undefined, \"$\"], \"SHP\": [undefined, \"£\"], \"SLE\": [undefined, undefined, 2], \"SLL\": [undefined, undefined, 0], \"SOS\": [undefined, undefined, 0], \"SRD\": [undefined, \"$\"], \"SSP\": [undefined, \"£\"], \"STD\": [undefined, undefined, 0], \"STN\": [undefined, \"Db\"], \"SYP\": [undefined, \"£\", 0], \"THB\": [undefined, \"฿\"], \"TMM\": [undefined, undefined, 0], \"TND\": [undefined, undefined, 3], \"TOP\": [undefined, \"T$\"], \"TRL\": [undefined, undefined, 0], \"TRY\": [undefined, \"₺\"], \"TTD\": [undefined, \"$\"], \"TWD\": [\"NT$\", \"$\", 2], \"TZS\": [undefined, undefined, 2], \"UAH\": [undefined, \"₴\"], \"UGX\": [undefined, undefined, 0], \"USD\": [\"$\"], \"UYI\": [undefined, undefined, 0], \"UYU\": [undefined, \"$\"], \"UYW\": [undefined, undefined, 4], \"UZS\": [undefined, undefined, 2], \"VEF\": [undefined, \"Bs\", 2], \"VND\": [\"₫\", undefined, 0], \"VUV\": [undefined, undefined, 0], \"XAF\": [\"FCFA\", undefined, 0], \"XCD\": [\"EC$\", \"$\"], \"XOF\": [\"F CFA\", undefined, 0], \"XPF\": [\"CFPF\", undefined, 0], \"XXX\": [\"¤\"], \"YER\": [undefined, undefined, 0], \"ZAR\": [undefined, \"R\"], \"ZMK\": [undefined, undefined, 0], \"ZMW\": [undefined, \"ZK\"], \"ZWD\": [undefined, undefined, 0] };\n\n/**\n * Format styles that can be used to represent numbers.\n * @see `getLocaleNumberFormat()`.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nvar NumberFormatStyle;\n(function (NumberFormatStyle) {\n NumberFormatStyle[NumberFormatStyle[\"Decimal\"] = 0] = \"Decimal\";\n NumberFormatStyle[NumberFormatStyle[\"Percent\"] = 1] = \"Percent\";\n NumberFormatStyle[NumberFormatStyle[\"Currency\"] = 2] = \"Currency\";\n NumberFormatStyle[NumberFormatStyle[\"Scientific\"] = 3] = \"Scientific\";\n})(NumberFormatStyle || (NumberFormatStyle = {}));\n/**\n * Plurality cases used for translating plurals to different languages.\n *\n * @see `NgPlural`\n * @see `NgPluralCase`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nvar Plural;\n(function (Plural) {\n Plural[Plural[\"Zero\"] = 0] = \"Zero\";\n Plural[Plural[\"One\"] = 1] = \"One\";\n Plural[Plural[\"Two\"] = 2] = \"Two\";\n Plural[Plural[\"Few\"] = 3] = \"Few\";\n Plural[Plural[\"Many\"] = 4] = \"Many\";\n Plural[Plural[\"Other\"] = 5] = \"Other\";\n})(Plural || (Plural = {}));\n/**\n * Context-dependant translation forms for strings.\n * Typically the standalone version is for the nominative form of the word,\n * and the format version is used for the genitive case.\n * @see [CLDR website](http://cldr.unicode.org/translation/date-time-1/date-time#TOC-Standalone-vs.-Format-Styles)\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nvar FormStyle;\n(function (FormStyle) {\n FormStyle[FormStyle[\"Format\"] = 0] = \"Format\";\n FormStyle[FormStyle[\"Standalone\"] = 1] = \"Standalone\";\n})(FormStyle || (FormStyle = {}));\n/**\n * String widths available for translations.\n * The specific character widths are locale-specific.\n * Examples are given for the word \"Sunday\" in English.\n *\n * @publicApi\n */\nvar TranslationWidth;\n(function (TranslationWidth) {\n /** 1 character for `en-US`. For example: 'S' */\n TranslationWidth[TranslationWidth[\"Narrow\"] = 0] = \"Narrow\";\n /** 3 characters for `en-US`. For example: 'Sun' */\n TranslationWidth[TranslationWidth[\"Abbreviated\"] = 1] = \"Abbreviated\";\n /** Full length for `en-US`. For example: \"Sunday\" */\n TranslationWidth[TranslationWidth[\"Wide\"] = 2] = \"Wide\";\n /** 2 characters for `en-US`, For example: \"Su\" */\n TranslationWidth[TranslationWidth[\"Short\"] = 3] = \"Short\";\n})(TranslationWidth || (TranslationWidth = {}));\n/**\n * String widths available for date-time formats.\n * The specific character widths are locale-specific.\n * Examples are given for `en-US`.\n *\n * @see `getLocaleDateFormat()`\n * @see `getLocaleTimeFormat()`\n * @see `getLocaleDateTimeFormat()`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n * @publicApi\n */\nvar FormatWidth;\n(function (FormatWidth) {\n /**\n * For `en-US`, 'M/d/yy, h:mm a'`\n * (Example: `6/15/15, 9:03 AM`)\n */\n FormatWidth[FormatWidth[\"Short\"] = 0] = \"Short\";\n /**\n * For `en-US`, `'MMM d, y, h:mm:ss a'`\n * (Example: `Jun 15, 2015, 9:03:01 AM`)\n */\n FormatWidth[FormatWidth[\"Medium\"] = 1] = \"Medium\";\n /**\n * For `en-US`, `'MMMM d, y, h:mm:ss a z'`\n * (Example: `June 15, 2015 at 9:03:01 AM GMT+1`)\n */\n FormatWidth[FormatWidth[\"Long\"] = 2] = \"Long\";\n /**\n * For `en-US`, `'EEEE, MMMM d, y, h:mm:ss a zzzz'`\n * (Example: `Monday, June 15, 2015 at 9:03:01 AM GMT+01:00`)\n */\n FormatWidth[FormatWidth[\"Full\"] = 3] = \"Full\";\n})(FormatWidth || (FormatWidth = {}));\n/**\n * Symbols that can be used to replace placeholders in number patterns.\n * Examples are based on `en-US` values.\n *\n * @see `getLocaleNumberSymbol()`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nvar NumberSymbol;\n(function (NumberSymbol) {\n /**\n * Decimal separator.\n * For `en-US`, the dot character.\n * Example: 2,345`.`67\n */\n NumberSymbol[NumberSymbol[\"Decimal\"] = 0] = \"Decimal\";\n /**\n * Grouping separator, typically for thousands.\n * For `en-US`, the comma character.\n * Example: 2`,`345.67\n */\n NumberSymbol[NumberSymbol[\"Group\"] = 1] = \"Group\";\n /**\n * List-item separator.\n * Example: \"one, two, and three\"\n */\n NumberSymbol[NumberSymbol[\"List\"] = 2] = \"List\";\n /**\n * Sign for percentage (out of 100).\n * Example: 23.4%\n */\n NumberSymbol[NumberSymbol[\"PercentSign\"] = 3] = \"PercentSign\";\n /**\n * Sign for positive numbers.\n * Example: +23\n */\n NumberSymbol[NumberSymbol[\"PlusSign\"] = 4] = \"PlusSign\";\n /**\n * Sign for negative numbers.\n * Example: -23\n */\n NumberSymbol[NumberSymbol[\"MinusSign\"] = 5] = \"MinusSign\";\n /**\n * Computer notation for exponential value (n times a power of 10).\n * Example: 1.2E3\n */\n NumberSymbol[NumberSymbol[\"Exponential\"] = 6] = \"Exponential\";\n /**\n * Human-readable format of exponential.\n * Example: 1.2x103\n */\n NumberSymbol[NumberSymbol[\"SuperscriptingExponent\"] = 7] = \"SuperscriptingExponent\";\n /**\n * Sign for permille (out of 1000).\n * Example: 23.4‰\n */\n NumberSymbol[NumberSymbol[\"PerMille\"] = 8] = \"PerMille\";\n /**\n * Infinity, can be used with plus and minus.\n * Example: ∞, +∞, -∞\n */\n NumberSymbol[NumberSymbol[\"Infinity\"] = 9] = \"Infinity\";\n /**\n * Not a number.\n * Example: NaN\n */\n NumberSymbol[NumberSymbol[\"NaN\"] = 10] = \"NaN\";\n /**\n * Symbol used between time units.\n * Example: 10:52\n */\n NumberSymbol[NumberSymbol[\"TimeSeparator\"] = 11] = \"TimeSeparator\";\n /**\n * Decimal separator for currency values (fallback to `Decimal`).\n * Example: $2,345.67\n */\n NumberSymbol[NumberSymbol[\"CurrencyDecimal\"] = 12] = \"CurrencyDecimal\";\n /**\n * Group separator for currency values (fallback to `Group`).\n * Example: $2,345.67\n */\n NumberSymbol[NumberSymbol[\"CurrencyGroup\"] = 13] = \"CurrencyGroup\";\n})(NumberSymbol || (NumberSymbol = {}));\n/**\n * The value for each day of the week, based on the `en-US` locale\n *\n * @publicApi\n */\nvar WeekDay;\n(function (WeekDay) {\n WeekDay[WeekDay[\"Sunday\"] = 0] = \"Sunday\";\n WeekDay[WeekDay[\"Monday\"] = 1] = \"Monday\";\n WeekDay[WeekDay[\"Tuesday\"] = 2] = \"Tuesday\";\n WeekDay[WeekDay[\"Wednesday\"] = 3] = \"Wednesday\";\n WeekDay[WeekDay[\"Thursday\"] = 4] = \"Thursday\";\n WeekDay[WeekDay[\"Friday\"] = 5] = \"Friday\";\n WeekDay[WeekDay[\"Saturday\"] = 6] = \"Saturday\";\n})(WeekDay || (WeekDay = {}));\n/**\n * Retrieves the locale ID from the currently loaded locale.\n * The loaded locale could be, for example, a global one rather than a regional one.\n * @param locale A locale code, such as `fr-FR`.\n * @returns The locale code. For example, `fr`.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleId(locale) {\n return ɵfindLocaleData(locale)[ɵLocaleDataIndex.LocaleId];\n}\n/**\n * Retrieves day period strings for the given locale.\n *\n * @param locale A locale code for the locale format rules to use.\n * @param formStyle The required grammatical form.\n * @param width The required character width.\n * @returns An array of localized period strings. For example, `[AM, PM]` for `en-US`.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleDayPeriods(locale, formStyle, width) {\n const data = ɵfindLocaleData(locale);\n const amPmData = [\n data[ɵLocaleDataIndex.DayPeriodsFormat], data[ɵLocaleDataIndex.DayPeriodsStandalone]\n ];\n const amPm = getLastDefinedValue(amPmData, formStyle);\n return getLastDefinedValue(amPm, width);\n}\n/**\n * Retrieves days of the week for the given locale, using the Gregorian calendar.\n *\n * @param locale A locale code for the locale format rules to use.\n * @param formStyle The required grammatical form.\n * @param width The required character width.\n * @returns An array of localized name strings.\n * For example,`[Sunday, Monday, ... Saturday]` for `en-US`.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleDayNames(locale, formStyle, width) {\n const data = ɵfindLocaleData(locale);\n const daysData = [data[ɵLocaleDataIndex.DaysFormat], data[ɵLocaleDataIndex.DaysStandalone]];\n const days = getLastDefinedValue(daysData, formStyle);\n return getLastDefinedValue(days, width);\n}\n/**\n * Retrieves months of the year for the given locale, using the Gregorian calendar.\n *\n * @param locale A locale code for the locale format rules to use.\n * @param formStyle The required grammatical form.\n * @param width The required character width.\n * @returns An array of localized name strings.\n * For example, `[January, February, ...]` for `en-US`.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleMonthNames(locale, formStyle, width) {\n const data = ɵfindLocaleData(locale);\n const monthsData = [data[ɵLocaleDataIndex.MonthsFormat], data[ɵLocaleDataIndex.MonthsStandalone]];\n const months = getLastDefinedValue(monthsData, formStyle);\n return getLastDefinedValue(months, width);\n}\n/**\n * Retrieves Gregorian-calendar eras for the given locale.\n * @param locale A locale code for the locale format rules to use.\n * @param width The required character width.\n\n * @returns An array of localized era strings.\n * For example, `[AD, BC]` for `en-US`.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleEraNames(locale, width) {\n const data = ɵfindLocaleData(locale);\n const erasData = data[ɵLocaleDataIndex.Eras];\n return getLastDefinedValue(erasData, width);\n}\n/**\n * Retrieves the first day of the week for the given locale.\n *\n * @param locale A locale code for the locale format rules to use.\n * @returns A day index number, using the 0-based week-day index for `en-US`\n * (Sunday = 0, Monday = 1, ...).\n * For example, for `fr-FR`, returns 1 to indicate that the first day is Monday.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleFirstDayOfWeek(locale) {\n const data = ɵfindLocaleData(locale);\n return data[ɵLocaleDataIndex.FirstDayOfWeek];\n}\n/**\n * Range of week days that are considered the week-end for the given locale.\n *\n * @param locale A locale code for the locale format rules to use.\n * @returns The range of day values, `[startDay, endDay]`.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleWeekEndRange(locale) {\n const data = ɵfindLocaleData(locale);\n return data[ɵLocaleDataIndex.WeekendRange];\n}\n/**\n * Retrieves a localized date-value formatting string.\n *\n * @param locale A locale code for the locale format rules to use.\n * @param width The format type.\n * @returns The localized formatting string.\n * @see `FormatWidth`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleDateFormat(locale, width) {\n const data = ɵfindLocaleData(locale);\n return getLastDefinedValue(data[ɵLocaleDataIndex.DateFormat], width);\n}\n/**\n * Retrieves a localized time-value formatting string.\n *\n * @param locale A locale code for the locale format rules to use.\n * @param width The format type.\n * @returns The localized formatting string.\n * @see `FormatWidth`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n\n * @publicApi\n */\nfunction getLocaleTimeFormat(locale, width) {\n const data = ɵfindLocaleData(locale);\n return getLastDefinedValue(data[ɵLocaleDataIndex.TimeFormat], width);\n}\n/**\n * Retrieves a localized date-time formatting string.\n *\n * @param locale A locale code for the locale format rules to use.\n * @param width The format type.\n * @returns The localized formatting string.\n * @see `FormatWidth`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleDateTimeFormat(locale, width) {\n const data = ɵfindLocaleData(locale);\n const dateTimeFormatData = data[ɵLocaleDataIndex.DateTimeFormat];\n return getLastDefinedValue(dateTimeFormatData, width);\n}\n/**\n * Retrieves a localized number symbol that can be used to replace placeholders in number formats.\n * @param locale The locale code.\n * @param symbol The symbol to localize.\n * @returns The character for the localized symbol.\n * @see `NumberSymbol`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleNumberSymbol(locale, symbol) {\n const data = ɵfindLocaleData(locale);\n const res = data[ɵLocaleDataIndex.NumberSymbols][symbol];\n if (typeof res === 'undefined') {\n if (symbol === NumberSymbol.CurrencyDecimal) {\n return data[ɵLocaleDataIndex.NumberSymbols][NumberSymbol.Decimal];\n }\n else if (symbol === NumberSymbol.CurrencyGroup) {\n return data[ɵLocaleDataIndex.NumberSymbols][NumberSymbol.Group];\n }\n }\n return res;\n}\n/**\n * Retrieves a number format for a given locale.\n *\n * Numbers are formatted using patterns, like `#,###.00`. For example, the pattern `#,###.00`\n * when used to format the number 12345.678 could result in \"12'345,678\". That would happen if the\n * grouping separator for your language is an apostrophe, and the decimal separator is a comma.\n *\n *
Important: The characters `.` `,` `0` `#` (and others below) are special placeholders\n * that stand for the decimal separator, and so on, and are NOT real characters.\n * You must NOT \"translate\" the placeholders. For example, don't change `.` to `,` even though in\n * your language the decimal point is written with a comma. The symbols should be replaced by the\n * local equivalents, using the appropriate `NumberSymbol` for your language.\n *\n * Here are the special characters used in number patterns:\n *\n * | Symbol | Meaning |\n * |--------|---------|\n * | . | Replaced automatically by the character used for the decimal point. |\n * | , | Replaced by the \"grouping\" (thousands) separator. |\n * | 0 | Replaced by a digit (or zero if there aren't enough digits). |\n * | # | Replaced by a digit (or nothing if there aren't enough). |\n * | ¤ | Replaced by a currency symbol, such as $ or USD. |\n * | % | Marks a percent format. The % symbol may change position, but must be retained. |\n * | E | Marks a scientific format. The E symbol may change position, but must be retained. |\n * | ' | Special characters used as literal characters are quoted with ASCII single quotes. |\n *\n * @param locale A locale code for the locale format rules to use.\n * @param type The type of numeric value to be formatted (such as `Decimal` or `Currency`.)\n * @returns The localized format string.\n * @see `NumberFormatStyle`\n * @see [CLDR website](http://cldr.unicode.org/translation/number-patterns)\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleNumberFormat(locale, type) {\n const data = ɵfindLocaleData(locale);\n return data[ɵLocaleDataIndex.NumberFormats][type];\n}\n/**\n * Retrieves the symbol used to represent the currency for the main country\n * corresponding to a given locale. For example, '$' for `en-US`.\n *\n * @param locale A locale code for the locale format rules to use.\n * @returns The localized symbol character,\n * or `null` if the main country cannot be determined.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleCurrencySymbol(locale) {\n const data = ɵfindLocaleData(locale);\n return data[ɵLocaleDataIndex.CurrencySymbol] || null;\n}\n/**\n * Retrieves the name of the currency for the main country corresponding\n * to a given locale. For example, 'US Dollar' for `en-US`.\n * @param locale A locale code for the locale format rules to use.\n * @returns The currency name,\n * or `null` if the main country cannot be determined.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleCurrencyName(locale) {\n const data = ɵfindLocaleData(locale);\n return data[ɵLocaleDataIndex.CurrencyName] || null;\n}\n/**\n * Retrieves the default currency code for the given locale.\n *\n * The default is defined as the first currency which is still in use.\n *\n * @param locale The code of the locale whose currency code we want.\n * @returns The code of the default currency for the given locale.\n *\n * @publicApi\n */\nfunction getLocaleCurrencyCode(locale) {\n return ɵgetLocaleCurrencyCode(locale);\n}\n/**\n * Retrieves the currency values for a given locale.\n * @param locale A locale code for the locale format rules to use.\n * @returns The currency values.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n */\nfunction getLocaleCurrencies(locale) {\n const data = ɵfindLocaleData(locale);\n return data[ɵLocaleDataIndex.Currencies];\n}\n/**\n * @alias core/ɵgetLocalePluralCase\n * @publicApi\n */\nconst getLocalePluralCase = ɵgetLocalePluralCase;\nfunction checkFullData(data) {\n if (!data[ɵLocaleDataIndex.ExtraData]) {\n throw new Error(`Missing extra locale data for the locale \"${data[ɵLocaleDataIndex\n .LocaleId]}\". Use \"registerLocaleData\" to load new data. See the \"I18n guide\" on angular.io to know more.`);\n }\n}\n/**\n * Retrieves locale-specific rules used to determine which day period to use\n * when more than one period is defined for a locale.\n *\n * There is a rule for each defined day period. The\n * first rule is applied to the first day period and so on.\n * Fall back to AM/PM when no rules are available.\n *\n * A rule can specify a period as time range, or as a single time value.\n *\n * This functionality is only available when you have loaded the full locale data.\n * See the [\"I18n guide\"](guide/i18n-common-format-data-locale).\n *\n * @param locale A locale code for the locale format rules to use.\n * @returns The rules for the locale, a single time value or array of *from-time, to-time*,\n * or null if no periods are available.\n *\n * @see `getLocaleExtraDayPeriods()`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleExtraDayPeriodRules(locale) {\n const data = ɵfindLocaleData(locale);\n checkFullData(data);\n const rules = data[ɵLocaleDataIndex.ExtraData][2 /* ɵExtraLocaleDataIndex.ExtraDayPeriodsRules */] || [];\n return rules.map((rule) => {\n if (typeof rule === 'string') {\n return extractTime(rule);\n }\n return [extractTime(rule[0]), extractTime(rule[1])];\n });\n}\n/**\n * Retrieves locale-specific day periods, which indicate roughly how a day is broken up\n * in different languages.\n * For example, for `en-US`, periods are morning, noon, afternoon, evening, and midnight.\n *\n * This functionality is only available when you have loaded the full locale data.\n * See the [\"I18n guide\"](guide/i18n-common-format-data-locale).\n *\n * @param locale A locale code for the locale format rules to use.\n * @param formStyle The required grammatical form.\n * @param width The required character width.\n * @returns The translated day-period strings.\n * @see `getLocaleExtraDayPeriodRules()`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLocaleExtraDayPeriods(locale, formStyle, width) {\n const data = ɵfindLocaleData(locale);\n checkFullData(data);\n const dayPeriodsData = [\n data[ɵLocaleDataIndex.ExtraData][0 /* ɵExtraLocaleDataIndex.ExtraDayPeriodFormats */],\n data[ɵLocaleDataIndex.ExtraData][1 /* ɵExtraLocaleDataIndex.ExtraDayPeriodStandalone */]\n ];\n const dayPeriods = getLastDefinedValue(dayPeriodsData, formStyle) || [];\n return getLastDefinedValue(dayPeriods, width) || [];\n}\n/**\n * Retrieves the writing direction of a specified locale\n * @param locale A locale code for the locale format rules to use.\n * @publicApi\n * @returns 'rtl' or 'ltr'\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n */\nfunction getLocaleDirection(locale) {\n const data = ɵfindLocaleData(locale);\n return data[ɵLocaleDataIndex.Directionality];\n}\n/**\n * Retrieves the first value that is defined in an array, going backwards from an index position.\n *\n * To avoid repeating the same data (as when the \"format\" and \"standalone\" forms are the same)\n * add the first value to the locale data arrays, and add other values only if they are different.\n *\n * @param data The data array to retrieve from.\n * @param index A 0-based index into the array to start from.\n * @returns The value immediately before the given index position.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getLastDefinedValue(data, index) {\n for (let i = index; i > -1; i--) {\n if (typeof data[i] !== 'undefined') {\n return data[i];\n }\n }\n throw new Error('Locale data API: locale data undefined');\n}\n/**\n * Extracts the hours and minutes from a string like \"15:45\"\n */\nfunction extractTime(time) {\n const [h, m] = time.split(':');\n return { hours: +h, minutes: +m };\n}\n/**\n * Retrieves the currency symbol for a given currency code.\n *\n * For example, for the default `en-US` locale, the code `USD` can\n * be represented by the narrow symbol `$` or the wide symbol `US$`.\n *\n * @param code The currency code.\n * @param format The format, `wide` or `narrow`.\n * @param locale A locale code for the locale format rules to use.\n *\n * @returns The symbol, or the currency code if no symbol is available.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getCurrencySymbol(code, format, locale = 'en') {\n const currency = getLocaleCurrencies(locale)[code] || CURRENCIES_EN[code] || [];\n const symbolNarrow = currency[1 /* ɵCurrencyIndex.SymbolNarrow */];\n if (format === 'narrow' && typeof symbolNarrow === 'string') {\n return symbolNarrow;\n }\n return currency[0 /* ɵCurrencyIndex.Symbol */] || code;\n}\n// Most currencies have cents, that's why the default is 2\nconst DEFAULT_NB_OF_CURRENCY_DIGITS = 2;\n/**\n * Reports the number of decimal digits for a given currency.\n * The value depends upon the presence of cents in that particular currency.\n *\n * @param code The currency code.\n * @returns The number of decimal digits, typically 0 or 2.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction getNumberOfCurrencyDigits(code) {\n let digits;\n const currency = CURRENCIES_EN[code];\n if (currency) {\n digits = currency[2 /* ɵCurrencyIndex.NbOfDigits */];\n }\n return typeof digits === 'number' ? digits : DEFAULT_NB_OF_CURRENCY_DIGITS;\n}\n\nconst ISO8601_DATE_REGEX = /^(\\d{4,})-?(\\d\\d)-?(\\d\\d)(?:T(\\d\\d)(?::?(\\d\\d)(?::?(\\d\\d)(?:\\.(\\d+))?)?)?(Z|([+-])(\\d\\d):?(\\d\\d))?)?$/;\n// 1 2 3 4 5 6 7 8 9 10 11\nconst NAMED_FORMATS = {};\nconst DATE_FORMATS_SPLIT = /((?:[^BEGHLMOSWYZabcdhmswyz']+)|(?:'(?:[^']|'')*')|(?:G{1,5}|y{1,4}|Y{1,4}|M{1,5}|L{1,5}|w{1,2}|W{1}|d{1,2}|E{1,6}|c{1,6}|a{1,5}|b{1,5}|B{1,5}|h{1,2}|H{1,2}|m{1,2}|s{1,2}|S{1,3}|z{1,4}|Z{1,5}|O{1,4}))([\\s\\S]*)/;\nvar ZoneWidth;\n(function (ZoneWidth) {\n ZoneWidth[ZoneWidth[\"Short\"] = 0] = \"Short\";\n ZoneWidth[ZoneWidth[\"ShortGMT\"] = 1] = \"ShortGMT\";\n ZoneWidth[ZoneWidth[\"Long\"] = 2] = \"Long\";\n ZoneWidth[ZoneWidth[\"Extended\"] = 3] = \"Extended\";\n})(ZoneWidth || (ZoneWidth = {}));\nvar DateType;\n(function (DateType) {\n DateType[DateType[\"FullYear\"] = 0] = \"FullYear\";\n DateType[DateType[\"Month\"] = 1] = \"Month\";\n DateType[DateType[\"Date\"] = 2] = \"Date\";\n DateType[DateType[\"Hours\"] = 3] = \"Hours\";\n DateType[DateType[\"Minutes\"] = 4] = \"Minutes\";\n DateType[DateType[\"Seconds\"] = 5] = \"Seconds\";\n DateType[DateType[\"FractionalSeconds\"] = 6] = \"FractionalSeconds\";\n DateType[DateType[\"Day\"] = 7] = \"Day\";\n})(DateType || (DateType = {}));\nvar TranslationType;\n(function (TranslationType) {\n TranslationType[TranslationType[\"DayPeriods\"] = 0] = \"DayPeriods\";\n TranslationType[TranslationType[\"Days\"] = 1] = \"Days\";\n TranslationType[TranslationType[\"Months\"] = 2] = \"Months\";\n TranslationType[TranslationType[\"Eras\"] = 3] = \"Eras\";\n})(TranslationType || (TranslationType = {}));\n/**\n * @ngModule CommonModule\n * @description\n *\n * Formats a date according to locale rules.\n *\n * @param value The date to format, as a Date, or a number (milliseconds since UTC epoch)\n * or an [ISO date-time string](https://www.w3.org/TR/NOTE-datetime).\n * @param format The date-time components to include. See `DatePipe` for details.\n * @param locale A locale code for the locale format rules to use.\n * @param timezone The time zone. A time zone offset from GMT (such as `'+0430'`),\n * or a standard UTC/GMT or continental US time zone abbreviation.\n * If not specified, uses host system settings.\n *\n * @returns The formatted date string.\n *\n * @see `DatePipe`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction formatDate(value, format, locale, timezone) {\n let date = toDate(value);\n const namedFormat = getNamedFormat(locale, format);\n format = namedFormat || format;\n let parts = [];\n let match;\n while (format) {\n match = DATE_FORMATS_SPLIT.exec(format);\n if (match) {\n parts = parts.concat(match.slice(1));\n const part = parts.pop();\n if (!part) {\n break;\n }\n format = part;\n }\n else {\n parts.push(format);\n break;\n }\n }\n let dateTimezoneOffset = date.getTimezoneOffset();\n if (timezone) {\n dateTimezoneOffset = timezoneToOffset(timezone, dateTimezoneOffset);\n date = convertTimezoneToLocal(date, timezone, true);\n }\n let text = '';\n parts.forEach(value => {\n const dateFormatter = getDateFormatter(value);\n text += dateFormatter ? dateFormatter(date, locale, dateTimezoneOffset) :\n value === '\\'\\'' ? '\\'' :\n value.replace(/(^'|'$)/g, '').replace(/''/g, '\\'');\n });\n return text;\n}\n/**\n * Create a new Date object with the given date value, and the time set to midnight.\n *\n * We cannot use `new Date(year, month, date)` because it maps years between 0 and 99 to 1900-1999.\n * See: https://github.com/angular/angular/issues/40377\n *\n * Note that this function returns a Date object whose time is midnight in the current locale's\n * timezone. In the future we might want to change this to be midnight in UTC, but this would be a\n * considerable breaking change.\n */\nfunction createDate(year, month, date) {\n // The `newDate` is set to midnight (UTC) on January 1st 1970.\n // - In PST this will be December 31st 1969 at 4pm.\n // - In GMT this will be January 1st 1970 at 1am.\n // Note that they even have different years, dates and months!\n const newDate = new Date(0);\n // `setFullYear()` allows years like 0001 to be set correctly. This function does not\n // change the internal time of the date.\n // Consider calling `setFullYear(2019, 8, 20)` (September 20, 2019).\n // - In PST this will now be September 20, 2019 at 4pm\n // - In GMT this will now be September 20, 2019 at 1am\n newDate.setFullYear(year, month, date);\n // We want the final date to be at local midnight, so we reset the time.\n // - In PST this will now be September 20, 2019 at 12am\n // - In GMT this will now be September 20, 2019 at 12am\n newDate.setHours(0, 0, 0);\n return newDate;\n}\nfunction getNamedFormat(locale, format) {\n const localeId = getLocaleId(locale);\n NAMED_FORMATS[localeId] = NAMED_FORMATS[localeId] || {};\n if (NAMED_FORMATS[localeId][format]) {\n return NAMED_FORMATS[localeId][format];\n }\n let formatValue = '';\n switch (format) {\n case 'shortDate':\n formatValue = getLocaleDateFormat(locale, FormatWidth.Short);\n break;\n case 'mediumDate':\n formatValue = getLocaleDateFormat(locale, FormatWidth.Medium);\n break;\n case 'longDate':\n formatValue = getLocaleDateFormat(locale, FormatWidth.Long);\n break;\n case 'fullDate':\n formatValue = getLocaleDateFormat(locale, FormatWidth.Full);\n break;\n case 'shortTime':\n formatValue = getLocaleTimeFormat(locale, FormatWidth.Short);\n break;\n case 'mediumTime':\n formatValue = getLocaleTimeFormat(locale, FormatWidth.Medium);\n break;\n case 'longTime':\n formatValue = getLocaleTimeFormat(locale, FormatWidth.Long);\n break;\n case 'fullTime':\n formatValue = getLocaleTimeFormat(locale, FormatWidth.Full);\n break;\n case 'short':\n const shortTime = getNamedFormat(locale, 'shortTime');\n const shortDate = getNamedFormat(locale, 'shortDate');\n formatValue = formatDateTime(getLocaleDateTimeFormat(locale, FormatWidth.Short), [shortTime, shortDate]);\n break;\n case 'medium':\n const mediumTime = getNamedFormat(locale, 'mediumTime');\n const mediumDate = getNamedFormat(locale, 'mediumDate');\n formatValue = formatDateTime(getLocaleDateTimeFormat(locale, FormatWidth.Medium), [mediumTime, mediumDate]);\n break;\n case 'long':\n const longTime = getNamedFormat(locale, 'longTime');\n const longDate = getNamedFormat(locale, 'longDate');\n formatValue =\n formatDateTime(getLocaleDateTimeFormat(locale, FormatWidth.Long), [longTime, longDate]);\n break;\n case 'full':\n const fullTime = getNamedFormat(locale, 'fullTime');\n const fullDate = getNamedFormat(locale, 'fullDate');\n formatValue =\n formatDateTime(getLocaleDateTimeFormat(locale, FormatWidth.Full), [fullTime, fullDate]);\n break;\n }\n if (formatValue) {\n NAMED_FORMATS[localeId][format] = formatValue;\n }\n return formatValue;\n}\nfunction formatDateTime(str, opt_values) {\n if (opt_values) {\n str = str.replace(/\\{([^}]+)}/g, function (match, key) {\n return (opt_values != null && key in opt_values) ? opt_values[key] : match;\n });\n }\n return str;\n}\nfunction padNumber(num, digits, minusSign = '-', trim, negWrap) {\n let neg = '';\n if (num < 0 || (negWrap && num <= 0)) {\n if (negWrap) {\n num = -num + 1;\n }\n else {\n num = -num;\n neg = minusSign;\n }\n }\n let strNum = String(num);\n while (strNum.length < digits) {\n strNum = '0' + strNum;\n }\n if (trim) {\n strNum = strNum.slice(strNum.length - digits);\n }\n return neg + strNum;\n}\nfunction formatFractionalSeconds(milliseconds, digits) {\n const strMs = padNumber(milliseconds, 3);\n return strMs.substring(0, digits);\n}\n/**\n * Returns a date formatter that transforms a date into its locale digit representation\n */\nfunction dateGetter(name, size, offset = 0, trim = false, negWrap = false) {\n return function (date, locale) {\n let part = getDatePart(name, date);\n if (offset > 0 || part > -offset) {\n part += offset;\n }\n if (name === DateType.Hours) {\n if (part === 0 && offset === -12) {\n part = 12;\n }\n }\n else if (name === DateType.FractionalSeconds) {\n return formatFractionalSeconds(part, size);\n }\n const localeMinus = getLocaleNumberSymbol(locale, NumberSymbol.MinusSign);\n return padNumber(part, size, localeMinus, trim, negWrap);\n };\n}\nfunction getDatePart(part, date) {\n switch (part) {\n case DateType.FullYear:\n return date.getFullYear();\n case DateType.Month:\n return date.getMonth();\n case DateType.Date:\n return date.getDate();\n case DateType.Hours:\n return date.getHours();\n case DateType.Minutes:\n return date.getMinutes();\n case DateType.Seconds:\n return date.getSeconds();\n case DateType.FractionalSeconds:\n return date.getMilliseconds();\n case DateType.Day:\n return date.getDay();\n default:\n throw new Error(`Unknown DateType value \"${part}\".`);\n }\n}\n/**\n * Returns a date formatter that transforms a date into its locale string representation\n */\nfunction dateStrGetter(name, width, form = FormStyle.Format, extended = false) {\n return function (date, locale) {\n return getDateTranslation(date, locale, name, width, form, extended);\n };\n}\n/**\n * Returns the locale translation of a date for a given form, type and width\n */\nfunction getDateTranslation(date, locale, name, width, form, extended) {\n switch (name) {\n case TranslationType.Months:\n return getLocaleMonthNames(locale, form, width)[date.getMonth()];\n case TranslationType.Days:\n return getLocaleDayNames(locale, form, width)[date.getDay()];\n case TranslationType.DayPeriods:\n const currentHours = date.getHours();\n const currentMinutes = date.getMinutes();\n if (extended) {\n const rules = getLocaleExtraDayPeriodRules(locale);\n const dayPeriods = getLocaleExtraDayPeriods(locale, form, width);\n const index = rules.findIndex(rule => {\n if (Array.isArray(rule)) {\n // morning, afternoon, evening, night\n const [from, to] = rule;\n const afterFrom = currentHours >= from.hours && currentMinutes >= from.minutes;\n const beforeTo = (currentHours < to.hours ||\n (currentHours === to.hours && currentMinutes < to.minutes));\n // We must account for normal rules that span a period during the day (e.g. 6am-9am)\n // where `from` is less (earlier) than `to`. But also rules that span midnight (e.g.\n // 10pm - 5am) where `from` is greater (later!) than `to`.\n //\n // In the first case the current time must be BOTH after `from` AND before `to`\n // (e.g. 8am is after 6am AND before 10am).\n //\n // In the second case the current time must be EITHER after `from` OR before `to`\n // (e.g. 4am is before 5am but not after 10pm; and 11pm is not before 5am but it is\n // after 10pm).\n if (from.hours < to.hours) {\n if (afterFrom && beforeTo) {\n return true;\n }\n }\n else if (afterFrom || beforeTo) {\n return true;\n }\n }\n else { // noon or midnight\n if (rule.hours === currentHours && rule.minutes === currentMinutes) {\n return true;\n }\n }\n return false;\n });\n if (index !== -1) {\n return dayPeriods[index];\n }\n }\n // if no rules for the day periods, we use am/pm by default\n return getLocaleDayPeriods(locale, form, width)[currentHours < 12 ? 0 : 1];\n case TranslationType.Eras:\n return getLocaleEraNames(locale, width)[date.getFullYear() <= 0 ? 0 : 1];\n default:\n // This default case is not needed by TypeScript compiler, as the switch is exhaustive.\n // However Closure Compiler does not understand that and reports an error in typed mode.\n // The `throw new Error` below works around the problem, and the unexpected: never variable\n // makes sure tsc still checks this code is unreachable.\n const unexpected = name;\n throw new Error(`unexpected translation type ${unexpected}`);\n }\n}\n/**\n * Returns a date formatter that transforms a date and an offset into a timezone with ISO8601 or\n * GMT format depending on the width (eg: short = +0430, short:GMT = GMT+4, long = GMT+04:30,\n * extended = +04:30)\n */\nfunction timeZoneGetter(width) {\n return function (date, locale, offset) {\n const zone = -1 * offset;\n const minusSign = getLocaleNumberSymbol(locale, NumberSymbol.MinusSign);\n const hours = zone > 0 ? Math.floor(zone / 60) : Math.ceil(zone / 60);\n switch (width) {\n case ZoneWidth.Short:\n return ((zone >= 0) ? '+' : '') + padNumber(hours, 2, minusSign) +\n padNumber(Math.abs(zone % 60), 2, minusSign);\n case ZoneWidth.ShortGMT:\n return 'GMT' + ((zone >= 0) ? '+' : '') + padNumber(hours, 1, minusSign);\n case ZoneWidth.Long:\n return 'GMT' + ((zone >= 0) ? '+' : '') + padNumber(hours, 2, minusSign) + ':' +\n padNumber(Math.abs(zone % 60), 2, minusSign);\n case ZoneWidth.Extended:\n if (offset === 0) {\n return 'Z';\n }\n else {\n return ((zone >= 0) ? '+' : '') + padNumber(hours, 2, minusSign) + ':' +\n padNumber(Math.abs(zone % 60), 2, minusSign);\n }\n default:\n throw new Error(`Unknown zone width \"${width}\"`);\n }\n };\n}\nconst JANUARY = 0;\nconst THURSDAY = 4;\nfunction getFirstThursdayOfYear(year) {\n const firstDayOfYear = createDate(year, JANUARY, 1).getDay();\n return createDate(year, 0, 1 + ((firstDayOfYear <= THURSDAY) ? THURSDAY : THURSDAY + 7) - firstDayOfYear);\n}\nfunction getThursdayThisWeek(datetime) {\n return createDate(datetime.getFullYear(), datetime.getMonth(), datetime.getDate() + (THURSDAY - datetime.getDay()));\n}\nfunction weekGetter(size, monthBased = false) {\n return function (date, locale) {\n let result;\n if (monthBased) {\n const nbDaysBefore1stDayOfMonth = new Date(date.getFullYear(), date.getMonth(), 1).getDay() - 1;\n const today = date.getDate();\n result = 1 + Math.floor((today + nbDaysBefore1stDayOfMonth) / 7);\n }\n else {\n const thisThurs = getThursdayThisWeek(date);\n // Some days of a year are part of next year according to ISO 8601.\n // Compute the firstThurs from the year of this week's Thursday\n const firstThurs = getFirstThursdayOfYear(thisThurs.getFullYear());\n const diff = thisThurs.getTime() - firstThurs.getTime();\n result = 1 + Math.round(diff / 6.048e8); // 6.048e8 ms per week\n }\n return padNumber(result, size, getLocaleNumberSymbol(locale, NumberSymbol.MinusSign));\n };\n}\n/**\n * Returns a date formatter that provides the week-numbering year for the input date.\n */\nfunction weekNumberingYearGetter(size, trim = false) {\n return function (date, locale) {\n const thisThurs = getThursdayThisWeek(date);\n const weekNumberingYear = thisThurs.getFullYear();\n return padNumber(weekNumberingYear, size, getLocaleNumberSymbol(locale, NumberSymbol.MinusSign), trim);\n };\n}\nconst DATE_FORMATS = {};\n// Based on CLDR formats:\n// See complete list: http://www.unicode.org/reports/tr35/tr35-dates.html#Date_Field_Symbol_Table\n// See also explanations: http://cldr.unicode.org/translation/date-time\n// TODO(ocombe): support all missing cldr formats: U, Q, D, F, e, j, J, C, A, v, V, X, x\nfunction getDateFormatter(format) {\n if (DATE_FORMATS[format]) {\n return DATE_FORMATS[format];\n }\n let formatter;\n switch (format) {\n // Era name (AD/BC)\n case 'G':\n case 'GG':\n case 'GGG':\n formatter = dateStrGetter(TranslationType.Eras, TranslationWidth.Abbreviated);\n break;\n case 'GGGG':\n formatter = dateStrGetter(TranslationType.Eras, TranslationWidth.Wide);\n break;\n case 'GGGGG':\n formatter = dateStrGetter(TranslationType.Eras, TranslationWidth.Narrow);\n break;\n // 1 digit representation of the year, e.g. (AD 1 => 1, AD 199 => 199)\n case 'y':\n formatter = dateGetter(DateType.FullYear, 1, 0, false, true);\n break;\n // 2 digit representation of the year, padded (00-99). (e.g. AD 2001 => 01, AD 2010 => 10)\n case 'yy':\n formatter = dateGetter(DateType.FullYear, 2, 0, true, true);\n break;\n // 3 digit representation of the year, padded (000-999). (e.g. AD 2001 => 01, AD 2010 => 10)\n case 'yyy':\n formatter = dateGetter(DateType.FullYear, 3, 0, false, true);\n break;\n // 4 digit representation of the year (e.g. AD 1 => 0001, AD 2010 => 2010)\n case 'yyyy':\n formatter = dateGetter(DateType.FullYear, 4, 0, false, true);\n break;\n // 1 digit representation of the week-numbering year, e.g. (AD 1 => 1, AD 199 => 199)\n case 'Y':\n formatter = weekNumberingYearGetter(1);\n break;\n // 2 digit representation of the week-numbering year, padded (00-99). (e.g. AD 2001 => 01, AD\n // 2010 => 10)\n case 'YY':\n formatter = weekNumberingYearGetter(2, true);\n break;\n // 3 digit representation of the week-numbering year, padded (000-999). (e.g. AD 1 => 001, AD\n // 2010 => 2010)\n case 'YYY':\n formatter = weekNumberingYearGetter(3);\n break;\n // 4 digit representation of the week-numbering year (e.g. AD 1 => 0001, AD 2010 => 2010)\n case 'YYYY':\n formatter = weekNumberingYearGetter(4);\n break;\n // Month of the year (1-12), numeric\n case 'M':\n case 'L':\n formatter = dateGetter(DateType.Month, 1, 1);\n break;\n case 'MM':\n case 'LL':\n formatter = dateGetter(DateType.Month, 2, 1);\n break;\n // Month of the year (January, ...), string, format\n case 'MMM':\n formatter = dateStrGetter(TranslationType.Months, TranslationWidth.Abbreviated);\n break;\n case 'MMMM':\n formatter = dateStrGetter(TranslationType.Months, TranslationWidth.Wide);\n break;\n case 'MMMMM':\n formatter = dateStrGetter(TranslationType.Months, TranslationWidth.Narrow);\n break;\n // Month of the year (January, ...), string, standalone\n case 'LLL':\n formatter =\n dateStrGetter(TranslationType.Months, TranslationWidth.Abbreviated, FormStyle.Standalone);\n break;\n case 'LLLL':\n formatter =\n dateStrGetter(TranslationType.Months, TranslationWidth.Wide, FormStyle.Standalone);\n break;\n case 'LLLLL':\n formatter =\n dateStrGetter(TranslationType.Months, TranslationWidth.Narrow, FormStyle.Standalone);\n break;\n // Week of the year (1, ... 52)\n case 'w':\n formatter = weekGetter(1);\n break;\n case 'ww':\n formatter = weekGetter(2);\n break;\n // Week of the month (1, ...)\n case 'W':\n formatter = weekGetter(1, true);\n break;\n // Day of the month (1-31)\n case 'd':\n formatter = dateGetter(DateType.Date, 1);\n break;\n case 'dd':\n formatter = dateGetter(DateType.Date, 2);\n break;\n // Day of the Week StandAlone (1, 1, Mon, Monday, M, Mo)\n case 'c':\n case 'cc':\n formatter = dateGetter(DateType.Day, 1);\n break;\n case 'ccc':\n formatter =\n dateStrGetter(TranslationType.Days, TranslationWidth.Abbreviated, FormStyle.Standalone);\n break;\n case 'cccc':\n formatter = dateStrGetter(TranslationType.Days, TranslationWidth.Wide, FormStyle.Standalone);\n break;\n case 'ccccc':\n formatter =\n dateStrGetter(TranslationType.Days, TranslationWidth.Narrow, FormStyle.Standalone);\n break;\n case 'cccccc':\n formatter = dateStrGetter(TranslationType.Days, TranslationWidth.Short, FormStyle.Standalone);\n break;\n // Day of the Week\n case 'E':\n case 'EE':\n case 'EEE':\n formatter = dateStrGetter(TranslationType.Days, TranslationWidth.Abbreviated);\n break;\n case 'EEEE':\n formatter = dateStrGetter(TranslationType.Days, TranslationWidth.Wide);\n break;\n case 'EEEEE':\n formatter = dateStrGetter(TranslationType.Days, TranslationWidth.Narrow);\n break;\n case 'EEEEEE':\n formatter = dateStrGetter(TranslationType.Days, TranslationWidth.Short);\n break;\n // Generic period of the day (am-pm)\n case 'a':\n case 'aa':\n case 'aaa':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Abbreviated);\n break;\n case 'aaaa':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Wide);\n break;\n case 'aaaaa':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Narrow);\n break;\n // Extended period of the day (midnight, at night, ...), standalone\n case 'b':\n case 'bb':\n case 'bbb':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Abbreviated, FormStyle.Standalone, true);\n break;\n case 'bbbb':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Wide, FormStyle.Standalone, true);\n break;\n case 'bbbbb':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Narrow, FormStyle.Standalone, true);\n break;\n // Extended period of the day (midnight, night, ...), standalone\n case 'B':\n case 'BB':\n case 'BBB':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Abbreviated, FormStyle.Format, true);\n break;\n case 'BBBB':\n formatter =\n dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Wide, FormStyle.Format, true);\n break;\n case 'BBBBB':\n formatter = dateStrGetter(TranslationType.DayPeriods, TranslationWidth.Narrow, FormStyle.Format, true);\n break;\n // Hour in AM/PM, (1-12)\n case 'h':\n formatter = dateGetter(DateType.Hours, 1, -12);\n break;\n case 'hh':\n formatter = dateGetter(DateType.Hours, 2, -12);\n break;\n // Hour of the day (0-23)\n case 'H':\n formatter = dateGetter(DateType.Hours, 1);\n break;\n // Hour in day, padded (00-23)\n case 'HH':\n formatter = dateGetter(DateType.Hours, 2);\n break;\n // Minute of the hour (0-59)\n case 'm':\n formatter = dateGetter(DateType.Minutes, 1);\n break;\n case 'mm':\n formatter = dateGetter(DateType.Minutes, 2);\n break;\n // Second of the minute (0-59)\n case 's':\n formatter = dateGetter(DateType.Seconds, 1);\n break;\n case 'ss':\n formatter = dateGetter(DateType.Seconds, 2);\n break;\n // Fractional second\n case 'S':\n formatter = dateGetter(DateType.FractionalSeconds, 1);\n break;\n case 'SS':\n formatter = dateGetter(DateType.FractionalSeconds, 2);\n break;\n case 'SSS':\n formatter = dateGetter(DateType.FractionalSeconds, 3);\n break;\n // Timezone ISO8601 short format (-0430)\n case 'Z':\n case 'ZZ':\n case 'ZZZ':\n formatter = timeZoneGetter(ZoneWidth.Short);\n break;\n // Timezone ISO8601 extended format (-04:30)\n case 'ZZZZZ':\n formatter = timeZoneGetter(ZoneWidth.Extended);\n break;\n // Timezone GMT short format (GMT+4)\n case 'O':\n case 'OO':\n case 'OOO':\n // Should be location, but fallback to format O instead because we don't have the data yet\n case 'z':\n case 'zz':\n case 'zzz':\n formatter = timeZoneGetter(ZoneWidth.ShortGMT);\n break;\n // Timezone GMT long format (GMT+0430)\n case 'OOOO':\n case 'ZZZZ':\n // Should be location, but fallback to format O instead because we don't have the data yet\n case 'zzzz':\n formatter = timeZoneGetter(ZoneWidth.Long);\n break;\n default:\n return null;\n }\n DATE_FORMATS[format] = formatter;\n return formatter;\n}\nfunction timezoneToOffset(timezone, fallback) {\n // Support: IE 11 only, Edge 13-15+\n // IE/Edge do not \"understand\" colon (`:`) in timezone\n timezone = timezone.replace(/:/g, '');\n const requestedTimezoneOffset = Date.parse('Jan 01, 1970 00:00:00 ' + timezone) / 60000;\n return isNaN(requestedTimezoneOffset) ? fallback : requestedTimezoneOffset;\n}\nfunction addDateMinutes(date, minutes) {\n date = new Date(date.getTime());\n date.setMinutes(date.getMinutes() + minutes);\n return date;\n}\nfunction convertTimezoneToLocal(date, timezone, reverse) {\n const reverseValue = reverse ? -1 : 1;\n const dateTimezoneOffset = date.getTimezoneOffset();\n const timezoneOffset = timezoneToOffset(timezone, dateTimezoneOffset);\n return addDateMinutes(date, reverseValue * (timezoneOffset - dateTimezoneOffset));\n}\n/**\n * Converts a value to date.\n *\n * Supported input formats:\n * - `Date`\n * - number: timestamp\n * - string: numeric (e.g. \"1234\"), ISO and date strings in a format supported by\n * [Date.parse()](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Date/parse).\n * Note: ISO strings without time return a date without timeoffset.\n *\n * Throws if unable to convert to a date.\n */\nfunction toDate(value) {\n if (isDate(value)) {\n return value;\n }\n if (typeof value === 'number' && !isNaN(value)) {\n return new Date(value);\n }\n if (typeof value === 'string') {\n value = value.trim();\n if (/^(\\d{4}(-\\d{1,2}(-\\d{1,2})?)?)$/.test(value)) {\n /* For ISO Strings without time the day, month and year must be extracted from the ISO String\n before Date creation to avoid time offset and errors in the new Date.\n If we only replace '-' with ',' in the ISO String (\"2015,01,01\"), and try to create a new\n date, some browsers (e.g. IE 9) will throw an invalid Date error.\n If we leave the '-' (\"2015-01-01\") and try to create a new Date(\"2015-01-01\") the timeoffset\n is applied.\n Note: ISO months are 0 for January, 1 for February, ... */\n const [y, m = 1, d = 1] = value.split('-').map((val) => +val);\n return createDate(y, m - 1, d);\n }\n const parsedNb = parseFloat(value);\n // any string that only contains numbers, like \"1234\" but not like \"1234hello\"\n if (!isNaN(value - parsedNb)) {\n return new Date(parsedNb);\n }\n let match;\n if (match = value.match(ISO8601_DATE_REGEX)) {\n return isoStringToDate(match);\n }\n }\n const date = new Date(value);\n if (!isDate(date)) {\n throw new Error(`Unable to convert \"${value}\" into a date`);\n }\n return date;\n}\n/**\n * Converts a date in ISO8601 to a Date.\n * Used instead of `Date.parse` because of browser discrepancies.\n */\nfunction isoStringToDate(match) {\n const date = new Date(0);\n let tzHour = 0;\n let tzMin = 0;\n // match[8] means that the string contains \"Z\" (UTC) or a timezone like \"+01:00\" or \"+0100\"\n const dateSetter = match[8] ? date.setUTCFullYear : date.setFullYear;\n const timeSetter = match[8] ? date.setUTCHours : date.setHours;\n // if there is a timezone defined like \"+01:00\" or \"+0100\"\n if (match[9]) {\n tzHour = Number(match[9] + match[10]);\n tzMin = Number(match[9] + match[11]);\n }\n dateSetter.call(date, Number(match[1]), Number(match[2]) - 1, Number(match[3]));\n const h = Number(match[4] || 0) - tzHour;\n const m = Number(match[5] || 0) - tzMin;\n const s = Number(match[6] || 0);\n // The ECMAScript specification (https://www.ecma-international.org/ecma-262/5.1/#sec-15.9.1.11)\n // defines that `DateTime` milliseconds should always be rounded down, so that `999.9ms`\n // becomes `999ms`.\n const ms = Math.floor(parseFloat('0.' + (match[7] || 0)) * 1000);\n timeSetter.call(date, h, m, s, ms);\n return date;\n}\nfunction isDate(value) {\n return value instanceof Date && !isNaN(value.valueOf());\n}\n\nconst NUMBER_FORMAT_REGEXP = /^(\\d+)?\\.((\\d+)(-(\\d+))?)?$/;\nconst MAX_DIGITS = 22;\nconst DECIMAL_SEP = '.';\nconst ZERO_CHAR = '0';\nconst PATTERN_SEP = ';';\nconst GROUP_SEP = ',';\nconst DIGIT_CHAR = '#';\nconst CURRENCY_CHAR = '¤';\nconst PERCENT_CHAR = '%';\n/**\n * Transforms a number to a locale string based on a style and a format.\n */\nfunction formatNumberToLocaleString(value, pattern, locale, groupSymbol, decimalSymbol, digitsInfo, isPercent = false) {\n let formattedText = '';\n let isZero = false;\n if (!isFinite(value)) {\n formattedText = getLocaleNumberSymbol(locale, NumberSymbol.Infinity);\n }\n else {\n let parsedNumber = parseNumber(value);\n if (isPercent) {\n parsedNumber = toPercent(parsedNumber);\n }\n let minInt = pattern.minInt;\n let minFraction = pattern.minFrac;\n let maxFraction = pattern.maxFrac;\n if (digitsInfo) {\n const parts = digitsInfo.match(NUMBER_FORMAT_REGEXP);\n if (parts === null) {\n throw new Error(`${digitsInfo} is not a valid digit info`);\n }\n const minIntPart = parts[1];\n const minFractionPart = parts[3];\n const maxFractionPart = parts[5];\n if (minIntPart != null) {\n minInt = parseIntAutoRadix(minIntPart);\n }\n if (minFractionPart != null) {\n minFraction = parseIntAutoRadix(minFractionPart);\n }\n if (maxFractionPart != null) {\n maxFraction = parseIntAutoRadix(maxFractionPart);\n }\n else if (minFractionPart != null && minFraction > maxFraction) {\n maxFraction = minFraction;\n }\n }\n roundNumber(parsedNumber, minFraction, maxFraction);\n let digits = parsedNumber.digits;\n let integerLen = parsedNumber.integerLen;\n const exponent = parsedNumber.exponent;\n let decimals = [];\n isZero = digits.every(d => !d);\n // pad zeros for small numbers\n for (; integerLen < minInt; integerLen++) {\n digits.unshift(0);\n }\n // pad zeros for small numbers\n for (; integerLen < 0; integerLen++) {\n digits.unshift(0);\n }\n // extract decimals digits\n if (integerLen > 0) {\n decimals = digits.splice(integerLen, digits.length);\n }\n else {\n decimals = digits;\n digits = [0];\n }\n // format the integer digits with grouping separators\n const groups = [];\n if (digits.length >= pattern.lgSize) {\n groups.unshift(digits.splice(-pattern.lgSize, digits.length).join(''));\n }\n while (digits.length > pattern.gSize) {\n groups.unshift(digits.splice(-pattern.gSize, digits.length).join(''));\n }\n if (digits.length) {\n groups.unshift(digits.join(''));\n }\n formattedText = groups.join(getLocaleNumberSymbol(locale, groupSymbol));\n // append the decimal digits\n if (decimals.length) {\n formattedText += getLocaleNumberSymbol(locale, decimalSymbol) + decimals.join('');\n }\n if (exponent) {\n formattedText += getLocaleNumberSymbol(locale, NumberSymbol.Exponential) + '+' + exponent;\n }\n }\n if (value < 0 && !isZero) {\n formattedText = pattern.negPre + formattedText + pattern.negSuf;\n }\n else {\n formattedText = pattern.posPre + formattedText + pattern.posSuf;\n }\n return formattedText;\n}\n/**\n * @ngModule CommonModule\n * @description\n *\n * Formats a number as currency using locale rules.\n *\n * @param value The number to format.\n * @param locale A locale code for the locale format rules to use.\n * @param currency A string containing the currency symbol or its name,\n * such as \"$\" or \"Canadian Dollar\". Used in output string, but does not affect the operation\n * of the function.\n * @param currencyCode The [ISO 4217](https://en.wikipedia.org/wiki/ISO_4217)\n * currency code, such as `USD` for the US dollar and `EUR` for the euro.\n * Used to determine the number of digits in the decimal part.\n * @param digitsInfo Decimal representation options, specified by a string in the following format:\n * `{minIntegerDigits}.{minFractionDigits}-{maxFractionDigits}`. See `DecimalPipe` for more details.\n *\n * @returns The formatted currency value.\n *\n * @see `formatNumber()`\n * @see `DecimalPipe`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction formatCurrency(value, locale, currency, currencyCode, digitsInfo) {\n const format = getLocaleNumberFormat(locale, NumberFormatStyle.Currency);\n const pattern = parseNumberFormat(format, getLocaleNumberSymbol(locale, NumberSymbol.MinusSign));\n pattern.minFrac = getNumberOfCurrencyDigits(currencyCode);\n pattern.maxFrac = pattern.minFrac;\n const res = formatNumberToLocaleString(value, pattern, locale, NumberSymbol.CurrencyGroup, NumberSymbol.CurrencyDecimal, digitsInfo);\n return res\n .replace(CURRENCY_CHAR, currency)\n // if we have 2 time the currency character, the second one is ignored\n .replace(CURRENCY_CHAR, '')\n // If there is a spacing between currency character and the value and\n // the currency character is suppressed by passing an empty string, the\n // spacing character would remain as part of the string. Then we\n // should remove it.\n .trim();\n}\n/**\n * @ngModule CommonModule\n * @description\n *\n * Formats a number as a percentage according to locale rules.\n *\n * @param value The number to format.\n * @param locale A locale code for the locale format rules to use.\n * @param digitsInfo Decimal representation options, specified by a string in the following format:\n * `{minIntegerDigits}.{minFractionDigits}-{maxFractionDigits}`. See `DecimalPipe` for more details.\n *\n * @returns The formatted percentage value.\n *\n * @see `formatNumber()`\n * @see `DecimalPipe`\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n * @publicApi\n *\n */\nfunction formatPercent(value, locale, digitsInfo) {\n const format = getLocaleNumberFormat(locale, NumberFormatStyle.Percent);\n const pattern = parseNumberFormat(format, getLocaleNumberSymbol(locale, NumberSymbol.MinusSign));\n const res = formatNumberToLocaleString(value, pattern, locale, NumberSymbol.Group, NumberSymbol.Decimal, digitsInfo, true);\n return res.replace(new RegExp(PERCENT_CHAR, 'g'), getLocaleNumberSymbol(locale, NumberSymbol.PercentSign));\n}\n/**\n * @ngModule CommonModule\n * @description\n *\n * Formats a number as text, with group sizing, separator, and other\n * parameters based on the locale.\n *\n * @param value The number to format.\n * @param locale A locale code for the locale format rules to use.\n * @param digitsInfo Decimal representation options, specified by a string in the following format:\n * `{minIntegerDigits}.{minFractionDigits}-{maxFractionDigits}`. See `DecimalPipe` for more details.\n *\n * @returns The formatted text string.\n * @see [Internationalization (i18n) Guide](https://angular.io/guide/i18n-overview)\n *\n * @publicApi\n */\nfunction formatNumber(value, locale, digitsInfo) {\n const format = getLocaleNumberFormat(locale, NumberFormatStyle.Decimal);\n const pattern = parseNumberFormat(format, getLocaleNumberSymbol(locale, NumberSymbol.MinusSign));\n return formatNumberToLocaleString(value, pattern, locale, NumberSymbol.Group, NumberSymbol.Decimal, digitsInfo);\n}\nfunction parseNumberFormat(format, minusSign = '-') {\n const p = {\n minInt: 1,\n minFrac: 0,\n maxFrac: 0,\n posPre: '',\n posSuf: '',\n negPre: '',\n negSuf: '',\n gSize: 0,\n lgSize: 0\n };\n const patternParts = format.split(PATTERN_SEP);\n const positive = patternParts[0];\n const negative = patternParts[1];\n const positiveParts = positive.indexOf(DECIMAL_SEP) !== -1 ?\n positive.split(DECIMAL_SEP) :\n [\n positive.substring(0, positive.lastIndexOf(ZERO_CHAR) + 1),\n positive.substring(positive.lastIndexOf(ZERO_CHAR) + 1)\n ], integer = positiveParts[0], fraction = positiveParts[1] || '';\n p.posPre = integer.substring(0, integer.indexOf(DIGIT_CHAR));\n for (let i = 0; i < fraction.length; i++) {\n const ch = fraction.charAt(i);\n if (ch === ZERO_CHAR) {\n p.minFrac = p.maxFrac = i + 1;\n }\n else if (ch === DIGIT_CHAR) {\n p.maxFrac = i + 1;\n }\n else {\n p.posSuf += ch;\n }\n }\n const groups = integer.split(GROUP_SEP);\n p.gSize = groups[1] ? groups[1].length : 0;\n p.lgSize = (groups[2] || groups[1]) ? (groups[2] || groups[1]).length : 0;\n if (negative) {\n const trunkLen = positive.length - p.posPre.length - p.posSuf.length, pos = negative.indexOf(DIGIT_CHAR);\n p.negPre = negative.substring(0, pos).replace(/'/g, '');\n p.negSuf = negative.slice(pos + trunkLen).replace(/'/g, '');\n }\n else {\n p.negPre = minusSign + p.posPre;\n p.negSuf = p.posSuf;\n }\n return p;\n}\n// Transforms a parsed number into a percentage by multiplying it by 100\nfunction toPercent(parsedNumber) {\n // if the number is 0, don't do anything\n if (parsedNumber.digits[0] === 0) {\n return parsedNumber;\n }\n // Getting the current number of decimals\n const fractionLen = parsedNumber.digits.length - parsedNumber.integerLen;\n if (parsedNumber.exponent) {\n parsedNumber.exponent += 2;\n }\n else {\n if (fractionLen === 0) {\n parsedNumber.digits.push(0, 0);\n }\n else if (fractionLen === 1) {\n parsedNumber.digits.push(0);\n }\n parsedNumber.integerLen += 2;\n }\n return parsedNumber;\n}\n/**\n * Parses a number.\n * Significant bits of this parse algorithm came from https://github.com/MikeMcl/big.js/\n */\nfunction parseNumber(num) {\n let numStr = Math.abs(num) + '';\n let exponent = 0, digits, integerLen;\n let i, j, zeros;\n // Decimal point?\n if ((integerLen = numStr.indexOf(DECIMAL_SEP)) > -1) {\n numStr = numStr.replace(DECIMAL_SEP, '');\n }\n // Exponential form?\n if ((i = numStr.search(/e/i)) > 0) {\n // Work out the exponent.\n if (integerLen < 0)\n integerLen = i;\n integerLen += +numStr.slice(i + 1);\n numStr = numStr.substring(0, i);\n }\n else if (integerLen < 0) {\n // There was no decimal point or exponent so it is an integer.\n integerLen = numStr.length;\n }\n // Count the number of leading zeros.\n for (i = 0; numStr.charAt(i) === ZERO_CHAR; i++) { /* empty */\n }\n if (i === (zeros = numStr.length)) {\n // The digits are all zero.\n digits = [0];\n integerLen = 1;\n }\n else {\n // Count the number of trailing zeros\n zeros--;\n while (numStr.charAt(zeros) === ZERO_CHAR)\n zeros--;\n // Trailing zeros are insignificant so ignore them\n integerLen -= i;\n digits = [];\n // Convert string to array of digits without leading/trailing zeros.\n for (j = 0; i <= zeros; i++, j++) {\n digits[j] = Number(numStr.charAt(i));\n }\n }\n // If the number overflows the maximum allowed digits then use an exponent.\n if (integerLen > MAX_DIGITS) {\n digits = digits.splice(0, MAX_DIGITS - 1);\n exponent = integerLen - 1;\n integerLen = 1;\n }\n return { digits, exponent, integerLen };\n}\n/**\n * Round the parsed number to the specified number of decimal places\n * This function changes the parsedNumber in-place\n */\nfunction roundNumber(parsedNumber, minFrac, maxFrac) {\n if (minFrac > maxFrac) {\n throw new Error(`The minimum number of digits after fraction (${minFrac}) is higher than the maximum (${maxFrac}).`);\n }\n let digits = parsedNumber.digits;\n let fractionLen = digits.length - parsedNumber.integerLen;\n const fractionSize = Math.min(Math.max(minFrac, fractionLen), maxFrac);\n // The index of the digit to where rounding is to occur\n let roundAt = fractionSize + parsedNumber.integerLen;\n let digit = digits[roundAt];\n if (roundAt > 0) {\n // Drop fractional digits beyond `roundAt`\n digits.splice(Math.max(parsedNumber.integerLen, roundAt));\n // Set non-fractional digits beyond `roundAt` to 0\n for (let j = roundAt; j < digits.length; j++) {\n digits[j] = 0;\n }\n }\n else {\n // We rounded to zero so reset the parsedNumber\n fractionLen = Math.max(0, fractionLen);\n parsedNumber.integerLen = 1;\n digits.length = Math.max(1, roundAt = fractionSize + 1);\n digits[0] = 0;\n for (let i = 1; i < roundAt; i++)\n digits[i] = 0;\n }\n if (digit >= 5) {\n if (roundAt - 1 < 0) {\n for (let k = 0; k > roundAt; k--) {\n digits.unshift(0);\n parsedNumber.integerLen++;\n }\n digits.unshift(1);\n parsedNumber.integerLen++;\n }\n else {\n digits[roundAt - 1]++;\n }\n }\n // Pad out with zeros to get the required fraction length\n for (; fractionLen < Math.max(0, fractionSize); fractionLen++)\n digits.push(0);\n let dropTrailingZeros = fractionSize !== 0;\n // Minimal length = nb of decimals required + current nb of integers\n // Any number besides that is optional and can be removed if it's a trailing 0\n const minLen = minFrac + parsedNumber.integerLen;\n // Do any carrying, e.g. a digit was rounded up to 10\n const carry = digits.reduceRight(function (carry, d, i, digits) {\n d = d + carry;\n digits[i] = d < 10 ? d : d - 10; // d % 10\n if (dropTrailingZeros) {\n // Do not keep meaningless fractional trailing zeros (e.g. 15.52000 --> 15.52)\n if (digits[i] === 0 && i >= minLen) {\n digits.pop();\n }\n else {\n dropTrailingZeros = false;\n }\n }\n return d >= 10 ? 1 : 0; // Math.floor(d / 10);\n }, 0);\n if (carry) {\n digits.unshift(carry);\n parsedNumber.integerLen++;\n }\n}\nfunction parseIntAutoRadix(text) {\n const result = parseInt(text);\n if (isNaN(result)) {\n throw new Error('Invalid integer literal when parsing ' + text);\n }\n return result;\n}\n\n/**\n * @publicApi\n */\nclass NgLocalization {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgLocalization, deps: [], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgLocalization, providedIn: 'root', useFactory: (locale) => new NgLocaleLocalization(locale), deps: [{ token: LOCALE_ID }] }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgLocalization, decorators: [{\n type: Injectable,\n args: [{\n providedIn: 'root',\n useFactory: (locale) => new NgLocaleLocalization(locale),\n deps: [LOCALE_ID],\n }]\n }] });\n/**\n * Returns the plural category for a given value.\n * - \"=value\" when the case exists,\n * - the plural category otherwise\n */\nfunction getPluralCategory(value, cases, ngLocalization, locale) {\n let key = `=${value}`;\n if (cases.indexOf(key) > -1) {\n return key;\n }\n key = ngLocalization.getPluralCategory(value, locale);\n if (cases.indexOf(key) > -1) {\n return key;\n }\n if (cases.indexOf('other') > -1) {\n return 'other';\n }\n throw new Error(`No plural message found for value \"${value}\"`);\n}\n/**\n * Returns the plural case based on the locale\n *\n * @publicApi\n */\nclass NgLocaleLocalization extends NgLocalization {\n constructor(locale) {\n super();\n this.locale = locale;\n }\n getPluralCategory(value, locale) {\n const plural = getLocalePluralCase(locale || this.locale)(value);\n switch (plural) {\n case Plural.Zero:\n return 'zero';\n case Plural.One:\n return 'one';\n case Plural.Two:\n return 'two';\n case Plural.Few:\n return 'few';\n case Plural.Many:\n return 'many';\n default:\n return 'other';\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgLocaleLocalization, deps: [{ token: LOCALE_ID }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgLocaleLocalization }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgLocaleLocalization, decorators: [{\n type: Injectable\n }], ctorParameters: function () { return [{ type: undefined, decorators: [{\n type: Inject,\n args: [LOCALE_ID]\n }] }]; } });\n\n/**\n * Register global data to be used internally by Angular. See the\n * [\"I18n guide\"](guide/i18n-common-format-data-locale) to know how to import additional locale\n * data.\n *\n * The signature registerLocaleData(data: any, extraData?: any) is deprecated since v5.1\n *\n * @publicApi\n */\nfunction registerLocaleData(data, localeId, extraData) {\n return ɵregisterLocaleData(data, localeId, extraData);\n}\n\nfunction parseCookieValue(cookieStr, name) {\n name = encodeURIComponent(name);\n for (const cookie of cookieStr.split(';')) {\n const eqIndex = cookie.indexOf('=');\n const [cookieName, cookieValue] = eqIndex == -1 ? [cookie, ''] : [cookie.slice(0, eqIndex), cookie.slice(eqIndex + 1)];\n if (cookieName.trim() === name) {\n return decodeURIComponent(cookieValue);\n }\n }\n return null;\n}\n\nconst WS_REGEXP = /\\s+/;\nconst EMPTY_ARRAY = [];\n/**\n * @ngModule CommonModule\n *\n * @usageNotes\n * ```\n *
...\n *\n *
...\n *\n *
...\n *\n *
...\n *\n *
...\n * ```\n *\n * @description\n *\n * Adds and removes CSS classes on an HTML element.\n *\n * The CSS classes are updated as follows, depending on the type of the expression evaluation:\n * - `string` - the CSS classes listed in the string (space delimited) are added,\n * - `Array` - the CSS classes declared as Array elements are added,\n * - `Object` - keys are CSS classes that get added when the expression given in the value\n * evaluates to a truthy value, otherwise they are removed.\n *\n * @publicApi\n */\nclass NgClass {\n constructor(\n // leaving references to differs in place since flex layout is extending NgClass...\n _iterableDiffers, _keyValueDiffers, _ngEl, _renderer) {\n this._iterableDiffers = _iterableDiffers;\n this._keyValueDiffers = _keyValueDiffers;\n this._ngEl = _ngEl;\n this._renderer = _renderer;\n this.initialClasses = EMPTY_ARRAY;\n this.stateMap = new Map();\n }\n set klass(value) {\n this.initialClasses = value != null ? value.trim().split(WS_REGEXP) : EMPTY_ARRAY;\n }\n set ngClass(value) {\n this.rawClass = typeof value === 'string' ? value.trim().split(WS_REGEXP) : value;\n }\n /*\n The NgClass directive uses the custom change detection algorithm for its inputs. The custom\n algorithm is necessary since inputs are represented as complex object or arrays that need to be\n deeply-compared.\n \n This algorithm is perf-sensitive since NgClass is used very frequently and its poor performance\n might negatively impact runtime performance of the entire change detection cycle. The design of\n this algorithm is making sure that:\n - there is no unnecessary DOM manipulation (CSS classes are added / removed from the DOM only when\n needed), even if references to bound objects change;\n - there is no memory allocation if nothing changes (even relatively modest memory allocation\n during the change detection cycle can result in GC pauses for some of the CD cycles).\n \n The algorithm works by iterating over the set of bound classes, staring with [class] binding and\n then going over [ngClass] binding. For each CSS class name:\n - check if it was seen before (this information is tracked in the state map) and if its value\n changed;\n - mark it as \"touched\" - names that are not marked are not present in the latest set of binding\n and we can remove such class name from the internal data structures;\n \n After iteration over all the CSS class names we've got data structure with all the information\n necessary to synchronize changes to the DOM - it is enough to iterate over the state map, flush\n changes to the DOM and reset internal data structures so those are ready for the next change\n detection cycle.\n */\n ngDoCheck() {\n // classes from the [class] binding\n for (const klass of this.initialClasses) {\n this._updateState(klass, true);\n }\n // classes from the [ngClass] binding\n const rawClass = this.rawClass;\n if (Array.isArray(rawClass) || rawClass instanceof Set) {\n for (const klass of rawClass) {\n this._updateState(klass, true);\n }\n }\n else if (rawClass != null) {\n for (const klass of Object.keys(rawClass)) {\n this._updateState(klass, Boolean(rawClass[klass]));\n }\n }\n this._applyStateDiff();\n }\n _updateState(klass, nextEnabled) {\n const state = this.stateMap.get(klass);\n if (state !== undefined) {\n if (state.enabled !== nextEnabled) {\n state.changed = true;\n state.enabled = nextEnabled;\n }\n state.touched = true;\n }\n else {\n this.stateMap.set(klass, { enabled: nextEnabled, changed: true, touched: true });\n }\n }\n _applyStateDiff() {\n for (const stateEntry of this.stateMap) {\n const klass = stateEntry[0];\n const state = stateEntry[1];\n if (state.changed) {\n this._toggleClass(klass, state.enabled);\n state.changed = false;\n }\n else if (!state.touched) {\n // A class that was previously active got removed from the new collection of classes -\n // remove from the DOM as well.\n if (state.enabled) {\n this._toggleClass(klass, false);\n }\n this.stateMap.delete(klass);\n }\n state.touched = false;\n }\n }\n _toggleClass(klass, enabled) {\n if (ngDevMode) {\n if (typeof klass !== 'string') {\n throw new Error(`NgClass can only toggle CSS classes expressed as strings, got ${ɵstringify(klass)}`);\n }\n }\n klass = klass.trim();\n if (klass.length > 0) {\n klass.split(WS_REGEXP).forEach(klass => {\n if (enabled) {\n this._renderer.addClass(this._ngEl.nativeElement, klass);\n }\n else {\n this._renderer.removeClass(this._ngEl.nativeElement, klass);\n }\n });\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgClass, deps: [{ token: i0.IterableDiffers }, { token: i0.KeyValueDiffers }, { token: i0.ElementRef }, { token: i0.Renderer2 }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgClass, isStandalone: true, selector: \"[ngClass]\", inputs: { klass: [\"class\", \"klass\"], ngClass: \"ngClass\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgClass, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngClass]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.IterableDiffers }, { type: i0.KeyValueDiffers }, { type: i0.ElementRef }, { type: i0.Renderer2 }]; }, propDecorators: { klass: [{\n type: Input,\n args: ['class']\n }], ngClass: [{\n type: Input,\n args: ['ngClass']\n }] } });\n\n/**\n * Instantiates a {@link Component} type and inserts its Host View into the current View.\n * `NgComponentOutlet` provides a declarative approach for dynamic component creation.\n *\n * `NgComponentOutlet` requires a component type, if a falsy value is set the view will clear and\n * any existing component will be destroyed.\n *\n * @usageNotes\n *\n * ### Fine tune control\n *\n * You can control the component creation process by using the following optional attributes:\n *\n * * `ngComponentOutletInjector`: Optional custom {@link Injector} that will be used as parent for\n * the Component. Defaults to the injector of the current view container.\n *\n * * `ngComponentOutletContent`: Optional list of projectable nodes to insert into the content\n * section of the component, if it exists.\n *\n * * `ngComponentOutletNgModule`: Optional NgModule class reference to allow loading another\n * module dynamically, then loading a component from that module.\n *\n * * `ngComponentOutletNgModuleFactory`: Deprecated config option that allows providing optional\n * NgModule factory to allow loading another module dynamically, then loading a component from that\n * module. Use `ngComponentOutletNgModule` instead.\n *\n * ### Syntax\n *\n * Simple\n * ```\n *
\n * ```\n *\n * Customized injector/content\n * ```\n *
\n * \n * ```\n *\n * Customized NgModule reference\n * ```\n *
\n * \n * ```\n *\n * ### A simple example\n *\n * {@example common/ngComponentOutlet/ts/module.ts region='SimpleExample'}\n *\n * A more complete example with additional options:\n *\n * {@example common/ngComponentOutlet/ts/module.ts region='CompleteExample'}\n *\n * @publicApi\n * @ngModule CommonModule\n */\nclass NgComponentOutlet {\n constructor(_viewContainerRef) {\n this._viewContainerRef = _viewContainerRef;\n this.ngComponentOutlet = null;\n }\n /** @nodoc */\n ngOnChanges(changes) {\n const { _viewContainerRef: viewContainerRef, ngComponentOutletNgModule: ngModule, ngComponentOutletNgModuleFactory: ngModuleFactory, } = this;\n viewContainerRef.clear();\n this._componentRef = undefined;\n if (this.ngComponentOutlet) {\n const injector = this.ngComponentOutletInjector || viewContainerRef.parentInjector;\n if (changes['ngComponentOutletNgModule'] || changes['ngComponentOutletNgModuleFactory']) {\n if (this._moduleRef)\n this._moduleRef.destroy();\n if (ngModule) {\n this._moduleRef = createNgModule(ngModule, getParentInjector(injector));\n }\n else if (ngModuleFactory) {\n this._moduleRef = ngModuleFactory.create(getParentInjector(injector));\n }\n else {\n this._moduleRef = undefined;\n }\n }\n this._componentRef = viewContainerRef.createComponent(this.ngComponentOutlet, {\n index: viewContainerRef.length,\n injector,\n ngModuleRef: this._moduleRef,\n projectableNodes: this.ngComponentOutletContent,\n });\n }\n }\n /** @nodoc */\n ngOnDestroy() {\n if (this._moduleRef)\n this._moduleRef.destroy();\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgComponentOutlet, deps: [{ token: i0.ViewContainerRef }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgComponentOutlet, isStandalone: true, selector: \"[ngComponentOutlet]\", inputs: { ngComponentOutlet: \"ngComponentOutlet\", ngComponentOutletInjector: \"ngComponentOutletInjector\", ngComponentOutletContent: \"ngComponentOutletContent\", ngComponentOutletNgModule: \"ngComponentOutletNgModule\", ngComponentOutletNgModuleFactory: \"ngComponentOutletNgModuleFactory\" }, usesOnChanges: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgComponentOutlet, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngComponentOutlet]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ViewContainerRef }]; }, propDecorators: { ngComponentOutlet: [{\n type: Input\n }], ngComponentOutletInjector: [{\n type: Input\n }], ngComponentOutletContent: [{\n type: Input\n }], ngComponentOutletNgModule: [{\n type: Input\n }], ngComponentOutletNgModuleFactory: [{\n type: Input\n }] } });\n// Helper function that returns an Injector instance of a parent NgModule.\nfunction getParentInjector(injector) {\n const parentNgModule = injector.get(NgModuleRef);\n return parentNgModule.injector;\n}\n\n/**\n * @publicApi\n */\nclass NgForOfContext {\n constructor($implicit, ngForOf, index, count) {\n this.$implicit = $implicit;\n this.ngForOf = ngForOf;\n this.index = index;\n this.count = count;\n }\n get first() {\n return this.index === 0;\n }\n get last() {\n return this.index === this.count - 1;\n }\n get even() {\n return this.index % 2 === 0;\n }\n get odd() {\n return !this.even;\n }\n}\n/**\n * A [structural directive](guide/structural-directives) that renders\n * a template for each item in a collection.\n * The directive is placed on an element, which becomes the parent\n * of the cloned templates.\n *\n * The `ngForOf` directive is generally used in the\n * [shorthand form](guide/structural-directives#asterisk) `*ngFor`.\n * In this form, the template to be rendered for each iteration is the content\n * of an anchor element containing the directive.\n *\n * The following example shows the shorthand syntax with some options,\n * contained in an `
` element.\n *\n * ```\n * ...\n * ```\n *\n * The shorthand form expands into a long form that uses the `ngForOf` selector\n * on an `
` element.\n * The content of the `` element is the `` element that held the\n * short-form directive.\n *\n * Here is the expanded version of the short-form example.\n *\n * ```\n * \n * ...\n * \n * ```\n *\n * Angular automatically expands the shorthand syntax as it compiles the template.\n * The context for each embedded view is logically merged to the current component\n * context according to its lexical position.\n *\n * When using the shorthand syntax, Angular allows only [one structural directive\n * on an element](guide/structural-directives#one-per-element).\n * If you want to iterate conditionally, for example,\n * put the `*ngIf` on a container element that wraps the `*ngFor` element.\n * For further discussion, see\n * [Structural Directives](guide/structural-directives#one-per-element).\n *\n * @usageNotes\n *\n * ### Local variables\n *\n * `NgForOf` provides exported values that can be aliased to local variables.\n * For example:\n *\n * ```\n * \n * {{i}}/{{users.length}}. {{user}} default\n * \n * ```\n *\n * The following exported values can be aliased to local variables:\n *\n * - `$implicit: T`: The value of the individual items in the iterable (`ngForOf`).\n * - `ngForOf: NgIterable`: The value of the iterable expression. Useful when the expression is\n * more complex then a property access, for example when using the async pipe (`userStreams |\n * async`).\n * - `index: number`: The index of the current item in the iterable.\n * - `count: number`: The length of the iterable.\n * - `first: boolean`: True when the item is the first item in the iterable.\n * - `last: boolean`: True when the item is the last item in the iterable.\n * - `even: boolean`: True when the item has an even index in the iterable.\n * - `odd: boolean`: True when the item has an odd index in the iterable.\n *\n * ### Change propagation\n *\n * When the contents of the iterator changes, `NgForOf` makes the corresponding changes to the DOM:\n *\n * * When an item is added, a new instance of the template is added to the DOM.\n * * When an item is removed, its template instance is removed from the DOM.\n * * When items are reordered, their respective templates are reordered in the DOM.\n *\n * Angular uses object identity to track insertions and deletions within the iterator and reproduce\n * those changes in the DOM. This has important implications for animations and any stateful\n * controls that are present, such as `` elements that accept user input. Inserted rows can\n * be animated in, deleted rows can be animated out, and unchanged rows retain any unsaved state\n * such as user input.\n * For more on animations, see [Transitions and Triggers](guide/transition-and-triggers).\n *\n * The identities of elements in the iterator can change while the data does not.\n * This can happen, for example, if the iterator is produced from an RPC to the server, and that\n * RPC is re-run. Even if the data hasn't changed, the second response produces objects with\n * different identities, and Angular must tear down the entire DOM and rebuild it (as if all old\n * elements were deleted and all new elements inserted).\n *\n * To avoid this expensive operation, you can customize the default tracking algorithm.\n * by supplying the `trackBy` option to `NgForOf`.\n * `trackBy` takes a function that has two arguments: `index` and `item`.\n * If `trackBy` is given, Angular tracks changes by the return value of the function.\n *\n * @see [Structural Directives](guide/structural-directives)\n * @ngModule CommonModule\n * @publicApi\n */\nclass NgForOf {\n /**\n * The value of the iterable expression, which can be used as a\n * [template input variable](guide/structural-directives#shorthand).\n */\n set ngForOf(ngForOf) {\n this._ngForOf = ngForOf;\n this._ngForOfDirty = true;\n }\n /**\n * Specifies a custom `TrackByFunction` to compute the identity of items in an iterable.\n *\n * If a custom `TrackByFunction` is not provided, `NgForOf` will use the item's [object\n * identity](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Object/is)\n * as the key.\n *\n * `NgForOf` uses the computed key to associate items in an iterable with DOM elements\n * it produces for these items.\n *\n * A custom `TrackByFunction` is useful to provide good user experience in cases when items in an\n * iterable rendered using `NgForOf` have a natural identifier (for example, custom ID or a\n * primary key), and this iterable could be updated with new object instances that still\n * represent the same underlying entity (for example, when data is re-fetched from the server,\n * and the iterable is recreated and re-rendered, but most of the data is still the same).\n *\n * @see `TrackByFunction`\n */\n set ngForTrackBy(fn) {\n if ((typeof ngDevMode === 'undefined' || ngDevMode) && fn != null && typeof fn !== 'function') {\n console.warn(`trackBy must be a function, but received ${JSON.stringify(fn)}. ` +\n `See https://angular.io/api/common/NgForOf#change-propagation for more information.`);\n }\n this._trackByFn = fn;\n }\n get ngForTrackBy() {\n return this._trackByFn;\n }\n constructor(_viewContainer, _template, _differs) {\n this._viewContainer = _viewContainer;\n this._template = _template;\n this._differs = _differs;\n this._ngForOf = null;\n this._ngForOfDirty = true;\n this._differ = null;\n }\n /**\n * A reference to the template that is stamped out for each item in the iterable.\n * @see [template reference variable](guide/template-reference-variables)\n */\n set ngForTemplate(value) {\n // TODO(TS2.1): make TemplateRef>> once we move to TS v2.1\n // The current type is too restrictive; a template that just uses index, for example,\n // should be acceptable.\n if (value) {\n this._template = value;\n }\n }\n /**\n * Applies the changes when needed.\n * @nodoc\n */\n ngDoCheck() {\n if (this._ngForOfDirty) {\n this._ngForOfDirty = false;\n // React on ngForOf changes only once all inputs have been initialized\n const value = this._ngForOf;\n if (!this._differ && value) {\n if (typeof ngDevMode === 'undefined' || ngDevMode) {\n try {\n // CAUTION: this logic is duplicated for production mode below, as the try-catch\n // is only present in development builds.\n this._differ = this._differs.find(value).create(this.ngForTrackBy);\n }\n catch {\n let errorMessage = `Cannot find a differ supporting object '${value}' of type '` +\n `${getTypeName(value)}'. NgFor only supports binding to Iterables, such as Arrays.`;\n if (typeof value === 'object') {\n errorMessage += ' Did you mean to use the keyvalue pipe?';\n }\n throw new ɵRuntimeError(-2200 /* RuntimeErrorCode.NG_FOR_MISSING_DIFFER */, errorMessage);\n }\n }\n else {\n // CAUTION: this logic is duplicated for development mode above, as the try-catch\n // is only present in development builds.\n this._differ = this._differs.find(value).create(this.ngForTrackBy);\n }\n }\n }\n if (this._differ) {\n const changes = this._differ.diff(this._ngForOf);\n if (changes)\n this._applyChanges(changes);\n }\n }\n _applyChanges(changes) {\n const viewContainer = this._viewContainer;\n changes.forEachOperation((item, adjustedPreviousIndex, currentIndex) => {\n if (item.previousIndex == null) {\n // NgForOf is never \"null\" or \"undefined\" here because the differ detected\n // that a new item needs to be inserted from the iterable. This implies that\n // there is an iterable value for \"_ngForOf\".\n viewContainer.createEmbeddedView(this._template, new NgForOfContext(item.item, this._ngForOf, -1, -1), currentIndex === null ? undefined : currentIndex);\n }\n else if (currentIndex == null) {\n viewContainer.remove(adjustedPreviousIndex === null ? undefined : adjustedPreviousIndex);\n }\n else if (adjustedPreviousIndex !== null) {\n const view = viewContainer.get(adjustedPreviousIndex);\n viewContainer.move(view, currentIndex);\n applyViewChange(view, item);\n }\n });\n for (let i = 0, ilen = viewContainer.length; i < ilen; i++) {\n const viewRef = viewContainer.get(i);\n const context = viewRef.context;\n context.index = i;\n context.count = ilen;\n context.ngForOf = this._ngForOf;\n }\n changes.forEachIdentityChange((record) => {\n const viewRef = viewContainer.get(record.currentIndex);\n applyViewChange(viewRef, record);\n });\n }\n /**\n * Asserts the correct type of the context for the template that `NgForOf` will render.\n *\n * The presence of this method is a signal to the Ivy template type-check compiler that the\n * `NgForOf` structural directive renders its template with a specific context type.\n */\n static ngTemplateContextGuard(dir, ctx) {\n return true;\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgForOf, deps: [{ token: i0.ViewContainerRef }, { token: i0.TemplateRef }, { token: i0.IterableDiffers }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgForOf, isStandalone: true, selector: \"[ngFor][ngForOf]\", inputs: { ngForOf: \"ngForOf\", ngForTrackBy: \"ngForTrackBy\", ngForTemplate: \"ngForTemplate\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgForOf, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngFor][ngForOf]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ViewContainerRef }, { type: i0.TemplateRef }, { type: i0.IterableDiffers }]; }, propDecorators: { ngForOf: [{\n type: Input\n }], ngForTrackBy: [{\n type: Input\n }], ngForTemplate: [{\n type: Input\n }] } });\nfunction applyViewChange(view, record) {\n view.context.$implicit = record.item;\n}\nfunction getTypeName(type) {\n return type['name'] || typeof type;\n}\n\n/**\n * A structural directive that conditionally includes a template based on the value of\n * an expression coerced to Boolean.\n * When the expression evaluates to true, Angular renders the template\n * provided in a `then` clause, and when false or null,\n * Angular renders the template provided in an optional `else` clause. The default\n * template for the `else` clause is blank.\n *\n * A [shorthand form](guide/structural-directives#asterisk) of the directive,\n * `*ngIf=\"condition\"`, is generally used, provided\n * as an attribute of the anchor element for the inserted template.\n * Angular expands this into a more explicit version, in which the anchor element\n * is contained in an `` element.\n *\n * Simple form with shorthand syntax:\n *\n * ```\n * Content to render when condition is true.
\n * ```\n *\n * Simple form with expanded syntax:\n *\n * ```\n * Content to render when condition is\n * true.
\n * ```\n *\n * Form with an \"else\" block:\n *\n * ```\n * Content to render when condition is true.
\n * Content to render when condition is false.\n * ```\n *\n * Shorthand form with \"then\" and \"else\" blocks:\n *\n * ```\n * \n * Content to render when condition is true.\n * Content to render when condition is false.\n * ```\n *\n * Form with storing the value locally:\n *\n * ```\n * {{value}}
\n * Content to render when value is null.\n * ```\n *\n * @usageNotes\n *\n * The `*ngIf` directive is most commonly used to conditionally show an inline template,\n * as seen in the following example.\n * The default `else` template is blank.\n *\n * {@example common/ngIf/ts/module.ts region='NgIfSimple'}\n *\n * ### Showing an alternative template using `else`\n *\n * To display a template when `expression` evaluates to false, use an `else` template\n * binding as shown in the following example.\n * The `else` binding points to an `` element labeled `#elseBlock`.\n * The template can be defined anywhere in the component view, but is typically placed right after\n * `ngIf` for readability.\n *\n * {@example common/ngIf/ts/module.ts region='NgIfElse'}\n *\n * ### Using an external `then` template\n *\n * In the previous example, the then-clause template is specified inline, as the content of the\n * tag that contains the `ngIf` directive. You can also specify a template that is defined\n * externally, by referencing a labeled `` element. When you do this, you can\n * change which template to use at runtime, as shown in the following example.\n *\n * {@example common/ngIf/ts/module.ts region='NgIfThenElse'}\n *\n * ### Storing a conditional result in a variable\n *\n * You might want to show a set of properties from the same object. If you are waiting\n * for asynchronous data, the object can be undefined.\n * In this case, you can use `ngIf` and store the result of the condition in a local\n * variable as shown in the following example.\n *\n * {@example common/ngIf/ts/module.ts region='NgIfAs'}\n *\n * This code uses only one `AsyncPipe`, so only one subscription is created.\n * The conditional statement stores the result of `userStream|async` in the local variable `user`.\n * You can then bind the local `user` repeatedly.\n *\n * The conditional displays the data only if `userStream` returns a value,\n * so you don't need to use the\n * safe-navigation-operator (`?.`)\n * to guard against null values when accessing properties.\n * You can display an alternative template while waiting for the data.\n *\n * ### Shorthand syntax\n *\n * The shorthand syntax `*ngIf` expands into two separate template specifications\n * for the \"then\" and \"else\" clauses. For example, consider the following shorthand statement,\n * that is meant to show a loading page while waiting for data to be loaded.\n *\n * ```\n * \n * ...\n *
\n *\n * \n * Loading...
\n * \n * ```\n *\n * You can see that the \"else\" clause references the ``\n * with the `#loading` label, and the template for the \"then\" clause\n * is provided as the content of the anchor element.\n *\n * However, when Angular expands the shorthand syntax, it creates\n * another `` tag, with `ngIf` and `ngIfElse` directives.\n * The anchor element containing the template for the \"then\" clause becomes\n * the content of this unlabeled `` tag.\n *\n * ```\n * \n * \n * ...\n *
\n * \n *\n * \n * Loading...
\n * \n * ```\n *\n * The presence of the implicit template object has implications for the nesting of\n * structural directives. For more on this subject, see\n * [Structural Directives](guide/structural-directives#one-per-element).\n *\n * @ngModule CommonModule\n * @publicApi\n */\nclass NgIf {\n constructor(_viewContainer, templateRef) {\n this._viewContainer = _viewContainer;\n this._context = new NgIfContext();\n this._thenTemplateRef = null;\n this._elseTemplateRef = null;\n this._thenViewRef = null;\n this._elseViewRef = null;\n this._thenTemplateRef = templateRef;\n }\n /**\n * The Boolean expression to evaluate as the condition for showing a template.\n */\n set ngIf(condition) {\n this._context.$implicit = this._context.ngIf = condition;\n this._updateView();\n }\n /**\n * A template to show if the condition expression evaluates to true.\n */\n set ngIfThen(templateRef) {\n assertTemplate('ngIfThen', templateRef);\n this._thenTemplateRef = templateRef;\n this._thenViewRef = null; // clear previous view if any.\n this._updateView();\n }\n /**\n * A template to show if the condition expression evaluates to false.\n */\n set ngIfElse(templateRef) {\n assertTemplate('ngIfElse', templateRef);\n this._elseTemplateRef = templateRef;\n this._elseViewRef = null; // clear previous view if any.\n this._updateView();\n }\n _updateView() {\n if (this._context.$implicit) {\n if (!this._thenViewRef) {\n this._viewContainer.clear();\n this._elseViewRef = null;\n if (this._thenTemplateRef) {\n this._thenViewRef =\n this._viewContainer.createEmbeddedView(this._thenTemplateRef, this._context);\n }\n }\n }\n else {\n if (!this._elseViewRef) {\n this._viewContainer.clear();\n this._thenViewRef = null;\n if (this._elseTemplateRef) {\n this._elseViewRef =\n this._viewContainer.createEmbeddedView(this._elseTemplateRef, this._context);\n }\n }\n }\n }\n /**\n * Asserts the correct type of the context for the template that `NgIf` will render.\n *\n * The presence of this method is a signal to the Ivy template type-check compiler that the\n * `NgIf` structural directive renders its template with a specific context type.\n */\n static ngTemplateContextGuard(dir, ctx) {\n return true;\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgIf, deps: [{ token: i0.ViewContainerRef }, { token: i0.TemplateRef }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgIf, isStandalone: true, selector: \"[ngIf]\", inputs: { ngIf: \"ngIf\", ngIfThen: \"ngIfThen\", ngIfElse: \"ngIfElse\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgIf, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngIf]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ViewContainerRef }, { type: i0.TemplateRef }]; }, propDecorators: { ngIf: [{\n type: Input\n }], ngIfThen: [{\n type: Input\n }], ngIfElse: [{\n type: Input\n }] } });\n/**\n * @publicApi\n */\nclass NgIfContext {\n constructor() {\n this.$implicit = null;\n this.ngIf = null;\n }\n}\nfunction assertTemplate(property, templateRef) {\n const isTemplateRefOrNull = !!(!templateRef || templateRef.createEmbeddedView);\n if (!isTemplateRefOrNull) {\n throw new Error(`${property} must be a TemplateRef, but received '${ɵstringify(templateRef)}'.`);\n }\n}\n\nclass SwitchView {\n constructor(_viewContainerRef, _templateRef) {\n this._viewContainerRef = _viewContainerRef;\n this._templateRef = _templateRef;\n this._created = false;\n }\n create() {\n this._created = true;\n this._viewContainerRef.createEmbeddedView(this._templateRef);\n }\n destroy() {\n this._created = false;\n this._viewContainerRef.clear();\n }\n enforceState(created) {\n if (created && !this._created) {\n this.create();\n }\n else if (!created && this._created) {\n this.destroy();\n }\n }\n}\n/**\n * @ngModule CommonModule\n *\n * @description\n * The `[ngSwitch]` directive on a container specifies an expression to match against.\n * The expressions to match are provided by `ngSwitchCase` directives on views within the container.\n * - Every view that matches is rendered.\n * - If there are no matches, a view with the `ngSwitchDefault` directive is rendered.\n * - Elements within the `[NgSwitch]` statement but outside of any `NgSwitchCase`\n * or `ngSwitchDefault` directive are preserved at the location.\n *\n * @usageNotes\n * Define a container element for the directive, and specify the switch expression\n * to match against as an attribute:\n *\n * ```\n * \n * ```\n *\n * Within the container, `*ngSwitchCase` statements specify the match expressions\n * as attributes. Include `*ngSwitchDefault` as the final case.\n *\n * ```\n * \n * ...\n * ...\n * ...\n * \n * ```\n *\n * ### Usage Examples\n *\n * The following example shows how to use more than one case to display the same view:\n *\n * ```\n * \n * \n * ...\n * ...\n * ...\n * \n * ...\n * \n * ```\n *\n * The following example shows how cases can be nested:\n * ```\n * \n * ...\n * ...\n * ...\n * \n * \n * \n * \n * \n * ...\n * \n * ```\n *\n * @publicApi\n * @see `NgSwitchCase`\n * @see `NgSwitchDefault`\n * @see [Structural Directives](guide/structural-directives)\n *\n */\nclass NgSwitch {\n constructor() {\n this._defaultViews = [];\n this._defaultUsed = false;\n this._caseCount = 0;\n this._lastCaseCheckIndex = 0;\n this._lastCasesMatched = false;\n }\n set ngSwitch(newValue) {\n this._ngSwitch = newValue;\n if (this._caseCount === 0) {\n this._updateDefaultCases(true);\n }\n }\n /** @internal */\n _addCase() {\n return this._caseCount++;\n }\n /** @internal */\n _addDefault(view) {\n this._defaultViews.push(view);\n }\n /** @internal */\n _matchCase(value) {\n const matched = value == this._ngSwitch;\n this._lastCasesMatched = this._lastCasesMatched || matched;\n this._lastCaseCheckIndex++;\n if (this._lastCaseCheckIndex === this._caseCount) {\n this._updateDefaultCases(!this._lastCasesMatched);\n this._lastCaseCheckIndex = 0;\n this._lastCasesMatched = false;\n }\n return matched;\n }\n _updateDefaultCases(useDefault) {\n if (this._defaultViews.length > 0 && useDefault !== this._defaultUsed) {\n this._defaultUsed = useDefault;\n for (const defaultView of this._defaultViews) {\n defaultView.enforceState(useDefault);\n }\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgSwitch, deps: [], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgSwitch, isStandalone: true, selector: \"[ngSwitch]\", inputs: { ngSwitch: \"ngSwitch\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgSwitch, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngSwitch]',\n standalone: true,\n }]\n }], propDecorators: { ngSwitch: [{\n type: Input\n }] } });\n/**\n * @ngModule CommonModule\n *\n * @description\n * Provides a switch case expression to match against an enclosing `ngSwitch` expression.\n * When the expressions match, the given `NgSwitchCase` template is rendered.\n * If multiple match expressions match the switch expression value, all of them are displayed.\n *\n * @usageNotes\n *\n * Within a switch container, `*ngSwitchCase` statements specify the match expressions\n * as attributes. Include `*ngSwitchDefault` as the final case.\n *\n * ```\n * \n * ...\n * ...\n * ...\n * \n * ```\n *\n * Each switch-case statement contains an in-line HTML template or template reference\n * that defines the subtree to be selected if the value of the match expression\n * matches the value of the switch expression.\n *\n * Unlike JavaScript, which uses strict equality, Angular uses loose equality.\n * This means that the empty string, `\"\"` matches 0.\n *\n * @publicApi\n * @see `NgSwitch`\n * @see `NgSwitchDefault`\n *\n */\nclass NgSwitchCase {\n constructor(viewContainer, templateRef, ngSwitch) {\n this.ngSwitch = ngSwitch;\n if ((typeof ngDevMode === 'undefined' || ngDevMode) && !ngSwitch) {\n throwNgSwitchProviderNotFoundError('ngSwitchCase', 'NgSwitchCase');\n }\n ngSwitch._addCase();\n this._view = new SwitchView(viewContainer, templateRef);\n }\n /**\n * Performs case matching. For internal use only.\n * @nodoc\n */\n ngDoCheck() {\n this._view.enforceState(this.ngSwitch._matchCase(this.ngSwitchCase));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgSwitchCase, deps: [{ token: i0.ViewContainerRef }, { token: i0.TemplateRef }, { token: NgSwitch, host: true, optional: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgSwitchCase, isStandalone: true, selector: \"[ngSwitchCase]\", inputs: { ngSwitchCase: \"ngSwitchCase\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgSwitchCase, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngSwitchCase]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ViewContainerRef }, { type: i0.TemplateRef }, { type: NgSwitch, decorators: [{\n type: Optional\n }, {\n type: Host\n }] }]; }, propDecorators: { ngSwitchCase: [{\n type: Input\n }] } });\n/**\n * @ngModule CommonModule\n *\n * @description\n *\n * Creates a view that is rendered when no `NgSwitchCase` expressions\n * match the `NgSwitch` expression.\n * This statement should be the final case in an `NgSwitch`.\n *\n * @publicApi\n * @see `NgSwitch`\n * @see `NgSwitchCase`\n *\n */\nclass NgSwitchDefault {\n constructor(viewContainer, templateRef, ngSwitch) {\n if ((typeof ngDevMode === 'undefined' || ngDevMode) && !ngSwitch) {\n throwNgSwitchProviderNotFoundError('ngSwitchDefault', 'NgSwitchDefault');\n }\n ngSwitch._addDefault(new SwitchView(viewContainer, templateRef));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgSwitchDefault, deps: [{ token: i0.ViewContainerRef }, { token: i0.TemplateRef }, { token: NgSwitch, host: true, optional: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgSwitchDefault, isStandalone: true, selector: \"[ngSwitchDefault]\", ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgSwitchDefault, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngSwitchDefault]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ViewContainerRef }, { type: i0.TemplateRef }, { type: NgSwitch, decorators: [{\n type: Optional\n }, {\n type: Host\n }] }]; } });\nfunction throwNgSwitchProviderNotFoundError(attrName, directiveName) {\n throw new ɵRuntimeError(2000 /* RuntimeErrorCode.PARENT_NG_SWITCH_NOT_FOUND */, `An element with the \"${attrName}\" attribute ` +\n `(matching the \"${directiveName}\" directive) must be located inside an element with the \"ngSwitch\" attribute ` +\n `(matching \"NgSwitch\" directive)`);\n}\n\n/**\n * @ngModule CommonModule\n *\n * @usageNotes\n * ```\n * \n * there is nothing\n * there is one\n * there are a few\n * \n * ```\n *\n * @description\n *\n * Adds / removes DOM sub-trees based on a numeric value. Tailored for pluralization.\n *\n * Displays DOM sub-trees that match the switch expression value, or failing that, DOM sub-trees\n * that match the switch expression's pluralization category.\n *\n * To use this directive you must provide a container element that sets the `[ngPlural]` attribute\n * to a switch expression. Inner elements with a `[ngPluralCase]` will display based on their\n * expression:\n * - if `[ngPluralCase]` is set to a value starting with `=`, it will only display if the value\n * matches the switch expression exactly,\n * - otherwise, the view will be treated as a \"category match\", and will only display if exact\n * value matches aren't found and the value maps to its category for the defined locale.\n *\n * See http://cldr.unicode.org/index/cldr-spec/plural-rules\n *\n * @publicApi\n */\nclass NgPlural {\n constructor(_localization) {\n this._localization = _localization;\n this._caseViews = {};\n }\n set ngPlural(value) {\n this._updateView(value);\n }\n addCase(value, switchView) {\n this._caseViews[value] = switchView;\n }\n _updateView(switchValue) {\n this._clearViews();\n const cases = Object.keys(this._caseViews);\n const key = getPluralCategory(switchValue, cases, this._localization);\n this._activateView(this._caseViews[key]);\n }\n _clearViews() {\n if (this._activeView)\n this._activeView.destroy();\n }\n _activateView(view) {\n if (view) {\n this._activeView = view;\n this._activeView.create();\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgPlural, deps: [{ token: NgLocalization }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgPlural, isStandalone: true, selector: \"[ngPlural]\", inputs: { ngPlural: \"ngPlural\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgPlural, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngPlural]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: NgLocalization }]; }, propDecorators: { ngPlural: [{\n type: Input\n }] } });\n/**\n * @ngModule CommonModule\n *\n * @description\n *\n * Creates a view that will be added/removed from the parent {@link NgPlural} when the\n * given expression matches the plural expression according to CLDR rules.\n *\n * @usageNotes\n * ```\n * \n * ...\n * ...\n * \n *```\n *\n * See {@link NgPlural} for more details and example.\n *\n * @publicApi\n */\nclass NgPluralCase {\n constructor(value, template, viewContainer, ngPlural) {\n this.value = value;\n const isANumber = !isNaN(Number(value));\n ngPlural.addCase(isANumber ? `=${value}` : value, new SwitchView(viewContainer, template));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgPluralCase, deps: [{ token: 'ngPluralCase', attribute: true }, { token: i0.TemplateRef }, { token: i0.ViewContainerRef }, { token: NgPlural, host: true }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgPluralCase, isStandalone: true, selector: \"[ngPluralCase]\", ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgPluralCase, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngPluralCase]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: undefined, decorators: [{\n type: Attribute,\n args: ['ngPluralCase']\n }] }, { type: i0.TemplateRef }, { type: i0.ViewContainerRef }, { type: NgPlural, decorators: [{\n type: Host\n }] }]; } });\n\n/**\n * @ngModule CommonModule\n *\n * @usageNotes\n *\n * Set the font of the containing element to the result of an expression.\n *\n * ```\n * ...\n * ```\n *\n * Set the width of the containing element to a pixel value returned by an expression.\n *\n * ```\n * ...\n * ```\n *\n * Set a collection of style values using an expression that returns key-value pairs.\n *\n * ```\n * ...\n * ```\n *\n * @description\n *\n * An attribute directive that updates styles for the containing HTML element.\n * Sets one or more style properties, specified as colon-separated key-value pairs.\n * The key is a style name, with an optional `.` suffix\n * (such as 'top.px', 'font-style.em').\n * The value is an expression to be evaluated.\n * The resulting non-null value, expressed in the given unit,\n * is assigned to the given style property.\n * If the result of evaluation is null, the corresponding style is removed.\n *\n * @publicApi\n */\nclass NgStyle {\n constructor(_ngEl, _differs, _renderer) {\n this._ngEl = _ngEl;\n this._differs = _differs;\n this._renderer = _renderer;\n this._ngStyle = null;\n this._differ = null;\n }\n set ngStyle(values) {\n this._ngStyle = values;\n if (!this._differ && values) {\n this._differ = this._differs.find(values).create();\n }\n }\n ngDoCheck() {\n if (this._differ) {\n const changes = this._differ.diff(this._ngStyle);\n if (changes) {\n this._applyChanges(changes);\n }\n }\n }\n _setStyle(nameAndUnit, value) {\n const [name, unit] = nameAndUnit.split('.');\n const flags = name.indexOf('-') === -1 ? undefined : RendererStyleFlags2.DashCase;\n if (value != null) {\n this._renderer.setStyle(this._ngEl.nativeElement, name, unit ? `${value}${unit}` : value, flags);\n }\n else {\n this._renderer.removeStyle(this._ngEl.nativeElement, name, flags);\n }\n }\n _applyChanges(changes) {\n changes.forEachRemovedItem((record) => this._setStyle(record.key, null));\n changes.forEachAddedItem((record) => this._setStyle(record.key, record.currentValue));\n changes.forEachChangedItem((record) => this._setStyle(record.key, record.currentValue));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgStyle, deps: [{ token: i0.ElementRef }, { token: i0.KeyValueDiffers }, { token: i0.Renderer2 }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgStyle, isStandalone: true, selector: \"[ngStyle]\", inputs: { ngStyle: \"ngStyle\" }, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgStyle, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngStyle]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ElementRef }, { type: i0.KeyValueDiffers }, { type: i0.Renderer2 }]; }, propDecorators: { ngStyle: [{\n type: Input,\n args: ['ngStyle']\n }] } });\n\n/**\n * @ngModule CommonModule\n *\n * @description\n *\n * Inserts an embedded view from a prepared `TemplateRef`.\n *\n * You can attach a context object to the `EmbeddedViewRef` by setting `[ngTemplateOutletContext]`.\n * `[ngTemplateOutletContext]` should be an object, the object's keys will be available for binding\n * by the local template `let` declarations.\n *\n * @usageNotes\n * ```\n * \n * ```\n *\n * Using the key `$implicit` in the context object will set its value as default.\n *\n * ### Example\n *\n * {@example common/ngTemplateOutlet/ts/module.ts region='NgTemplateOutlet'}\n *\n * @publicApi\n */\nclass NgTemplateOutlet {\n constructor(_viewContainerRef) {\n this._viewContainerRef = _viewContainerRef;\n this._viewRef = null;\n /**\n * A context object to attach to the {@link EmbeddedViewRef}. This should be an\n * object, the object's keys will be available for binding by the local template `let`\n * declarations.\n * Using the key `$implicit` in the context object will set its value as default.\n */\n this.ngTemplateOutletContext = null;\n /**\n * A string defining the template reference and optionally the context object for the template.\n */\n this.ngTemplateOutlet = null;\n /** Injector to be used within the embedded view. */\n this.ngTemplateOutletInjector = null;\n }\n /** @nodoc */\n ngOnChanges(changes) {\n if (changes['ngTemplateOutlet'] || changes['ngTemplateOutletInjector']) {\n const viewContainerRef = this._viewContainerRef;\n if (this._viewRef) {\n viewContainerRef.remove(viewContainerRef.indexOf(this._viewRef));\n }\n if (this.ngTemplateOutlet) {\n const { ngTemplateOutlet: template, ngTemplateOutletContext: context, ngTemplateOutletInjector: injector, } = this;\n this._viewRef =\n viewContainerRef.createEmbeddedView(template, context, injector ? { injector } : undefined);\n }\n else {\n this._viewRef = null;\n }\n }\n else if (this._viewRef && changes['ngTemplateOutletContext'] && this.ngTemplateOutletContext) {\n this._viewRef.context = this.ngTemplateOutletContext;\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgTemplateOutlet, deps: [{ token: i0.ViewContainerRef }], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgTemplateOutlet, isStandalone: true, selector: \"[ngTemplateOutlet]\", inputs: { ngTemplateOutletContext: \"ngTemplateOutletContext\", ngTemplateOutlet: \"ngTemplateOutlet\", ngTemplateOutletInjector: \"ngTemplateOutletInjector\" }, usesOnChanges: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgTemplateOutlet, decorators: [{\n type: Directive,\n args: [{\n selector: '[ngTemplateOutlet]',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ViewContainerRef }]; }, propDecorators: { ngTemplateOutletContext: [{\n type: Input\n }], ngTemplateOutlet: [{\n type: Input\n }], ngTemplateOutletInjector: [{\n type: Input\n }] } });\n\n/**\n * A collection of Angular directives that are likely to be used in each and every Angular\n * application.\n */\nconst COMMON_DIRECTIVES = [\n NgClass,\n NgComponentOutlet,\n NgForOf,\n NgIf,\n NgTemplateOutlet,\n NgStyle,\n NgSwitch,\n NgSwitchCase,\n NgSwitchDefault,\n NgPlural,\n NgPluralCase,\n];\n\nfunction invalidPipeArgumentError(type, value) {\n return new ɵRuntimeError(2100 /* RuntimeErrorCode.INVALID_PIPE_ARGUMENT */, ngDevMode && `InvalidPipeArgument: '${value}' for pipe '${ɵstringify(type)}'`);\n}\n\nclass SubscribableStrategy {\n createSubscription(async, updateLatestValue) {\n return async.subscribe({\n next: updateLatestValue,\n error: (e) => {\n throw e;\n }\n });\n }\n dispose(subscription) {\n subscription.unsubscribe();\n }\n}\nclass PromiseStrategy {\n createSubscription(async, updateLatestValue) {\n return async.then(updateLatestValue, e => {\n throw e;\n });\n }\n dispose(subscription) { }\n}\nconst _promiseStrategy = new PromiseStrategy();\nconst _subscribableStrategy = new SubscribableStrategy();\n/**\n * @ngModule CommonModule\n * @description\n *\n * Unwraps a value from an asynchronous primitive.\n *\n * The `async` pipe subscribes to an `Observable` or `Promise` and returns the latest value it has\n * emitted. When a new value is emitted, the `async` pipe marks the component to be checked for\n * changes. When the component gets destroyed, the `async` pipe unsubscribes automatically to avoid\n * potential memory leaks. When the reference of the expression changes, the `async` pipe\n * automatically unsubscribes from the old `Observable` or `Promise` and subscribes to the new one.\n *\n * @usageNotes\n *\n * ### Examples\n *\n * This example binds a `Promise` to the view. Clicking the `Resolve` button resolves the\n * promise.\n *\n * {@example common/pipes/ts/async_pipe.ts region='AsyncPipePromise'}\n *\n * It's also possible to use `async` with Observables. The example below binds the `time` Observable\n * to the view. The Observable continuously updates the view with the current time.\n *\n * {@example common/pipes/ts/async_pipe.ts region='AsyncPipeObservable'}\n *\n * @publicApi\n */\nclass AsyncPipe {\n constructor(ref) {\n this._latestValue = null;\n this._subscription = null;\n this._obj = null;\n this._strategy = null;\n // Assign `ref` into `this._ref` manually instead of declaring `_ref` in the constructor\n // parameter list, as the type of `this._ref` includes `null` unlike the type of `ref`.\n this._ref = ref;\n }\n ngOnDestroy() {\n if (this._subscription) {\n this._dispose();\n }\n // Clear the `ChangeDetectorRef` and its association with the view data, to mitigate\n // potential memory leaks in Observables that could otherwise cause the view data to\n // be retained.\n // https://github.com/angular/angular/issues/17624\n this._ref = null;\n }\n transform(obj) {\n if (!this._obj) {\n if (obj) {\n this._subscribe(obj);\n }\n return this._latestValue;\n }\n if (obj !== this._obj) {\n this._dispose();\n return this.transform(obj);\n }\n return this._latestValue;\n }\n _subscribe(obj) {\n this._obj = obj;\n this._strategy = this._selectStrategy(obj);\n this._subscription = this._strategy.createSubscription(obj, (value) => this._updateLatestValue(obj, value));\n }\n _selectStrategy(obj) {\n if (ɵisPromise(obj)) {\n return _promiseStrategy;\n }\n if (ɵisSubscribable(obj)) {\n return _subscribableStrategy;\n }\n throw invalidPipeArgumentError(AsyncPipe, obj);\n }\n _dispose() {\n // Note: `dispose` is only called if a subscription has been initialized before, indicating\n // that `this._strategy` is also available.\n this._strategy.dispose(this._subscription);\n this._latestValue = null;\n this._subscription = null;\n this._obj = null;\n }\n _updateLatestValue(async, value) {\n if (async === this._obj) {\n this._latestValue = value;\n // Note: `this._ref` is only cleared in `ngOnDestroy` so is known to be available when a\n // value is being updated.\n this._ref.markForCheck();\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: AsyncPipe, deps: [{ token: i0.ChangeDetectorRef }], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: AsyncPipe, isStandalone: true, name: \"async\", pure: false }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: AsyncPipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'async',\n pure: false,\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: i0.ChangeDetectorRef }]; } });\n\n/**\n * Transforms text to all lower case.\n *\n * @see `UpperCasePipe`\n * @see `TitleCasePipe`\n * @usageNotes\n *\n * The following example defines a view that allows the user to enter\n * text, and then uses the pipe to convert the input text to all lower case.\n *\n * \n *\n * @ngModule CommonModule\n * @publicApi\n */\nclass LowerCasePipe {\n transform(value) {\n if (value == null)\n return null;\n if (typeof value !== 'string') {\n throw invalidPipeArgumentError(LowerCasePipe, value);\n }\n return value.toLowerCase();\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LowerCasePipe, deps: [], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: LowerCasePipe, isStandalone: true, name: \"lowercase\" }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LowerCasePipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'lowercase',\n standalone: true,\n }]\n }] });\n//\n// Regex below matches any Unicode word and number compatible with ES5. In ES2018 the same result\n// can be achieved by using /[0-9\\p{L}]\\S*/gu and also known as Unicode Property Escapes\n// (https://2ality.com/2017/07/regexp-unicode-property-escapes.html). Since there is no\n// transpilation of this functionality down to ES5 without external tool, the only solution is\n// to use already transpiled form. Example can be found here -\n// https://mothereff.in/regexpu#input=var+regex+%3D+%2F%5B0-9%5Cp%7BL%7D%5D%5CS*%2Fgu%3B%0A%0A&unicodePropertyEscape=1\n//\nconst unicodeWordMatch = /(?:[0-9A-Za-z\\xAA\\xB5\\xBA\\xC0-\\xD6\\xD8-\\xF6\\xF8-\\u02C1\\u02C6-\\u02D1\\u02E0-\\u02E4\\u02EC\\u02EE\\u0370-\\u0374\\u0376\\u0377\\u037A-\\u037D\\u037F\\u0386\\u0388-\\u038A\\u038C\\u038E-\\u03A1\\u03A3-\\u03F5\\u03F7-\\u0481\\u048A-\\u052F\\u0531-\\u0556\\u0559\\u0560-\\u0588\\u05D0-\\u05EA\\u05EF-\\u05F2\\u0620-\\u064A\\u066E\\u066F\\u0671-\\u06D3\\u06D5\\u06E5\\u06E6\\u06EE\\u06EF\\u06FA-\\u06FC\\u06FF\\u0710\\u0712-\\u072F\\u074D-\\u07A5\\u07B1\\u07CA-\\u07EA\\u07F4\\u07F5\\u07FA\\u0800-\\u0815\\u081A\\u0824\\u0828\\u0840-\\u0858\\u0860-\\u086A\\u0870-\\u0887\\u0889-\\u088E\\u08A0-\\u08C9\\u0904-\\u0939\\u093D\\u0950\\u0958-\\u0961\\u0971-\\u0980\\u0985-\\u098C\\u098F\\u0990\\u0993-\\u09A8\\u09AA-\\u09B0\\u09B2\\u09B6-\\u09B9\\u09BD\\u09CE\\u09DC\\u09DD\\u09DF-\\u09E1\\u09F0\\u09F1\\u09FC\\u0A05-\\u0A0A\\u0A0F\\u0A10\\u0A13-\\u0A28\\u0A2A-\\u0A30\\u0A32\\u0A33\\u0A35\\u0A36\\u0A38\\u0A39\\u0A59-\\u0A5C\\u0A5E\\u0A72-\\u0A74\\u0A85-\\u0A8D\\u0A8F-\\u0A91\\u0A93-\\u0AA8\\u0AAA-\\u0AB0\\u0AB2\\u0AB3\\u0AB5-\\u0AB9\\u0ABD\\u0AD0\\u0AE0\\u0AE1\\u0AF9\\u0B05-\\u0B0C\\u0B0F\\u0B10\\u0B13-\\u0B28\\u0B2A-\\u0B30\\u0B32\\u0B33\\u0B35-\\u0B39\\u0B3D\\u0B5C\\u0B5D\\u0B5F-\\u0B61\\u0B71\\u0B83\\u0B85-\\u0B8A\\u0B8E-\\u0B90\\u0B92-\\u0B95\\u0B99\\u0B9A\\u0B9C\\u0B9E\\u0B9F\\u0BA3\\u0BA4\\u0BA8-\\u0BAA\\u0BAE-\\u0BB9\\u0BD0\\u0C05-\\u0C0C\\u0C0E-\\u0C10\\u0C12-\\u0C28\\u0C2A-\\u0C39\\u0C3D\\u0C58-\\u0C5A\\u0C5D\\u0C60\\u0C61\\u0C80\\u0C85-\\u0C8C\\u0C8E-\\u0C90\\u0C92-\\u0CA8\\u0CAA-\\u0CB3\\u0CB5-\\u0CB9\\u0CBD\\u0CDD\\u0CDE\\u0CE0\\u0CE1\\u0CF1\\u0CF2\\u0D04-\\u0D0C\\u0D0E-\\u0D10\\u0D12-\\u0D3A\\u0D3D\\u0D4E\\u0D54-\\u0D56\\u0D5F-\\u0D61\\u0D7A-\\u0D7F\\u0D85-\\u0D96\\u0D9A-\\u0DB1\\u0DB3-\\u0DBB\\u0DBD\\u0DC0-\\u0DC6\\u0E01-\\u0E30\\u0E32\\u0E33\\u0E40-\\u0E46\\u0E81\\u0E82\\u0E84\\u0E86-\\u0E8A\\u0E8C-\\u0EA3\\u0EA5\\u0EA7-\\u0EB0\\u0EB2\\u0EB3\\u0EBD\\u0EC0-\\u0EC4\\u0EC6\\u0EDC-\\u0EDF\\u0F00\\u0F40-\\u0F47\\u0F49-\\u0F6C\\u0F88-\\u0F8C\\u1000-\\u102A\\u103F\\u1050-\\u1055\\u105A-\\u105D\\u1061\\u1065\\u1066\\u106E-\\u1070\\u1075-\\u1081\\u108E\\u10A0-\\u10C5\\u10C7\\u10CD\\u10D0-\\u10FA\\u10FC-\\u1248\\u124A-\\u124D\\u1250-\\u1256\\u1258\\u125A-\\u125D\\u1260-\\u1288\\u128A-\\u128D\\u1290-\\u12B0\\u12B2-\\u12B5\\u12B8-\\u12BE\\u12C0\\u12C2-\\u12C5\\u12C8-\\u12D6\\u12D8-\\u1310\\u1312-\\u1315\\u1318-\\u135A\\u1380-\\u138F\\u13A0-\\u13F5\\u13F8-\\u13FD\\u1401-\\u166C\\u166F-\\u167F\\u1681-\\u169A\\u16A0-\\u16EA\\u16F1-\\u16F8\\u1700-\\u1711\\u171F-\\u1731\\u1740-\\u1751\\u1760-\\u176C\\u176E-\\u1770\\u1780-\\u17B3\\u17D7\\u17DC\\u1820-\\u1878\\u1880-\\u1884\\u1887-\\u18A8\\u18AA\\u18B0-\\u18F5\\u1900-\\u191E\\u1950-\\u196D\\u1970-\\u1974\\u1980-\\u19AB\\u19B0-\\u19C9\\u1A00-\\u1A16\\u1A20-\\u1A54\\u1AA7\\u1B05-\\u1B33\\u1B45-\\u1B4C\\u1B83-\\u1BA0\\u1BAE\\u1BAF\\u1BBA-\\u1BE5\\u1C00-\\u1C23\\u1C4D-\\u1C4F\\u1C5A-\\u1C7D\\u1C80-\\u1C88\\u1C90-\\u1CBA\\u1CBD-\\u1CBF\\u1CE9-\\u1CEC\\u1CEE-\\u1CF3\\u1CF5\\u1CF6\\u1CFA\\u1D00-\\u1DBF\\u1E00-\\u1F15\\u1F18-\\u1F1D\\u1F20-\\u1F45\\u1F48-\\u1F4D\\u1F50-\\u1F57\\u1F59\\u1F5B\\u1F5D\\u1F5F-\\u1F7D\\u1F80-\\u1FB4\\u1FB6-\\u1FBC\\u1FBE\\u1FC2-\\u1FC4\\u1FC6-\\u1FCC\\u1FD0-\\u1FD3\\u1FD6-\\u1FDB\\u1FE0-\\u1FEC\\u1FF2-\\u1FF4\\u1FF6-\\u1FFC\\u2071\\u207F\\u2090-\\u209C\\u2102\\u2107\\u210A-\\u2113\\u2115\\u2119-\\u211D\\u2124\\u2126\\u2128\\u212A-\\u212D\\u212F-\\u2139\\u213C-\\u213F\\u2145-\\u2149\\u214E\\u2183\\u2184\\u2C00-\\u2CE4\\u2CEB-\\u2CEE\\u2CF2\\u2CF3\\u2D00-\\u2D25\\u2D27\\u2D2D\\u2D30-\\u2D67\\u2D6F\\u2D80-\\u2D96\\u2DA0-\\u2DA6\\u2DA8-\\u2DAE\\u2DB0-\\u2DB6\\u2DB8-\\u2DBE\\u2DC0-\\u2DC6\\u2DC8-\\u2DCE\\u2DD0-\\u2DD6\\u2DD8-\\u2DDE\\u2E2F\\u3005\\u3006\\u3031-\\u3035\\u303B\\u303C\\u3041-\\u3096\\u309D-\\u309F\\u30A1-\\u30FA\\u30FC-\\u30FF\\u3105-\\u312F\\u3131-\\u318E\\u31A0-\\u31BF\\u31F0-\\u31FF\\u3400-\\u4DBF\\u4E00-\\uA48C\\uA4D0-\\uA4FD\\uA500-\\uA60C\\uA610-\\uA61F\\uA62A\\uA62B\\uA640-\\uA66E\\uA67F-\\uA69D\\uA6A0-\\uA6E5\\uA717-\\uA71F\\uA722-\\uA788\\uA78B-\\uA7CA\\uA7D0\\uA7D1\\uA7D3\\uA7D5-\\uA7D9\\uA7F2-\\uA801\\uA803-\\uA805\\uA807-\\uA80A\\uA80C-\\uA822\\uA840-\\uA873\\uA882-\\uA8B3\\uA8F2-\\uA8F7\\uA8FB\\uA8FD\\uA8FE\\uA90A-\\uA925\\uA930-\\uA946\\uA960-\\uA97C\\uA984-\\uA9B2\\uA9CF\\uA9E0-\\uA9E4\\uA9E6-\\uA9EF\\uA9FA-\\uA9FE\\uAA00-\\uAA28\\uAA40-\\uAA42\\uAA44-\\uAA4B\\uAA60-\\uAA76\\uAA7A\\uAA7E-\\uAAAF\\uAAB1\\uAAB5\\uAAB6\\uAAB9-\\uAABD\\uAAC0\\uAAC2\\uAADB-\\uAADD\\uAAE0-\\uAAEA\\uAAF2-\\uAAF4\\uAB01-\\uAB06\\uAB09-\\uAB0E\\uAB11-\\uAB16\\uAB20-\\uAB26\\uAB28-\\uAB2E\\uAB30-\\uAB5A\\uAB5C-\\uAB69\\uAB70-\\uABE2\\uAC00-\\uD7A3\\uD7B0-\\uD7C6\\uD7CB-\\uD7FB\\uF900-\\uFA6D\\uFA70-\\uFAD9\\uFB00-\\uFB06\\uFB13-\\uFB17\\uFB1D\\uFB1F-\\uFB28\\uFB2A-\\uFB36\\uFB38-\\uFB3C\\uFB3E\\uFB40\\uFB41\\uFB43\\uFB44\\uFB46-\\uFBB1\\uFBD3-\\uFD3D\\uFD50-\\uFD8F\\uFD92-\\uFDC7\\uFDF0-\\uFDFB\\uFE70-\\uFE74\\uFE76-\\uFEFC\\uFF21-\\uFF3A\\uFF41-\\uFF5A\\uFF66-\\uFFBE\\uFFC2-\\uFFC7\\uFFCA-\\uFFCF\\uFFD2-\\uFFD7\\uFFDA-\\uFFDC]|\\uD800[\\uDC00-\\uDC0B\\uDC0D-\\uDC26\\uDC28-\\uDC3A\\uDC3C\\uDC3D\\uDC3F-\\uDC4D\\uDC50-\\uDC5D\\uDC80-\\uDCFA\\uDE80-\\uDE9C\\uDEA0-\\uDED0\\uDF00-\\uDF1F\\uDF2D-\\uDF40\\uDF42-\\uDF49\\uDF50-\\uDF75\\uDF80-\\uDF9D\\uDFA0-\\uDFC3\\uDFC8-\\uDFCF]|\\uD801[\\uDC00-\\uDC9D\\uDCB0-\\uDCD3\\uDCD8-\\uDCFB\\uDD00-\\uDD27\\uDD30-\\uDD63\\uDD70-\\uDD7A\\uDD7C-\\uDD8A\\uDD8C-\\uDD92\\uDD94\\uDD95\\uDD97-\\uDDA1\\uDDA3-\\uDDB1\\uDDB3-\\uDDB9\\uDDBB\\uDDBC\\uDE00-\\uDF36\\uDF40-\\uDF55\\uDF60-\\uDF67\\uDF80-\\uDF85\\uDF87-\\uDFB0\\uDFB2-\\uDFBA]|\\uD802[\\uDC00-\\uDC05\\uDC08\\uDC0A-\\uDC35\\uDC37\\uDC38\\uDC3C\\uDC3F-\\uDC55\\uDC60-\\uDC76\\uDC80-\\uDC9E\\uDCE0-\\uDCF2\\uDCF4\\uDCF5\\uDD00-\\uDD15\\uDD20-\\uDD39\\uDD80-\\uDDB7\\uDDBE\\uDDBF\\uDE00\\uDE10-\\uDE13\\uDE15-\\uDE17\\uDE19-\\uDE35\\uDE60-\\uDE7C\\uDE80-\\uDE9C\\uDEC0-\\uDEC7\\uDEC9-\\uDEE4\\uDF00-\\uDF35\\uDF40-\\uDF55\\uDF60-\\uDF72\\uDF80-\\uDF91]|\\uD803[\\uDC00-\\uDC48\\uDC80-\\uDCB2\\uDCC0-\\uDCF2\\uDD00-\\uDD23\\uDE80-\\uDEA9\\uDEB0\\uDEB1\\uDF00-\\uDF1C\\uDF27\\uDF30-\\uDF45\\uDF70-\\uDF81\\uDFB0-\\uDFC4\\uDFE0-\\uDFF6]|\\uD804[\\uDC03-\\uDC37\\uDC71\\uDC72\\uDC75\\uDC83-\\uDCAF\\uDCD0-\\uDCE8\\uDD03-\\uDD26\\uDD44\\uDD47\\uDD50-\\uDD72\\uDD76\\uDD83-\\uDDB2\\uDDC1-\\uDDC4\\uDDDA\\uDDDC\\uDE00-\\uDE11\\uDE13-\\uDE2B\\uDE80-\\uDE86\\uDE88\\uDE8A-\\uDE8D\\uDE8F-\\uDE9D\\uDE9F-\\uDEA8\\uDEB0-\\uDEDE\\uDF05-\\uDF0C\\uDF0F\\uDF10\\uDF13-\\uDF28\\uDF2A-\\uDF30\\uDF32\\uDF33\\uDF35-\\uDF39\\uDF3D\\uDF50\\uDF5D-\\uDF61]|\\uD805[\\uDC00-\\uDC34\\uDC47-\\uDC4A\\uDC5F-\\uDC61\\uDC80-\\uDCAF\\uDCC4\\uDCC5\\uDCC7\\uDD80-\\uDDAE\\uDDD8-\\uDDDB\\uDE00-\\uDE2F\\uDE44\\uDE80-\\uDEAA\\uDEB8\\uDF00-\\uDF1A\\uDF40-\\uDF46]|\\uD806[\\uDC00-\\uDC2B\\uDCA0-\\uDCDF\\uDCFF-\\uDD06\\uDD09\\uDD0C-\\uDD13\\uDD15\\uDD16\\uDD18-\\uDD2F\\uDD3F\\uDD41\\uDDA0-\\uDDA7\\uDDAA-\\uDDD0\\uDDE1\\uDDE3\\uDE00\\uDE0B-\\uDE32\\uDE3A\\uDE50\\uDE5C-\\uDE89\\uDE9D\\uDEB0-\\uDEF8]|\\uD807[\\uDC00-\\uDC08\\uDC0A-\\uDC2E\\uDC40\\uDC72-\\uDC8F\\uDD00-\\uDD06\\uDD08\\uDD09\\uDD0B-\\uDD30\\uDD46\\uDD60-\\uDD65\\uDD67\\uDD68\\uDD6A-\\uDD89\\uDD98\\uDEE0-\\uDEF2\\uDFB0]|\\uD808[\\uDC00-\\uDF99]|\\uD809[\\uDC80-\\uDD43]|\\uD80B[\\uDF90-\\uDFF0]|[\\uD80C\\uD81C-\\uD820\\uD822\\uD840-\\uD868\\uD86A-\\uD86C\\uD86F-\\uD872\\uD874-\\uD879\\uD880-\\uD883][\\uDC00-\\uDFFF]|\\uD80D[\\uDC00-\\uDC2E]|\\uD811[\\uDC00-\\uDE46]|\\uD81A[\\uDC00-\\uDE38\\uDE40-\\uDE5E\\uDE70-\\uDEBE\\uDED0-\\uDEED\\uDF00-\\uDF2F\\uDF40-\\uDF43\\uDF63-\\uDF77\\uDF7D-\\uDF8F]|\\uD81B[\\uDE40-\\uDE7F\\uDF00-\\uDF4A\\uDF50\\uDF93-\\uDF9F\\uDFE0\\uDFE1\\uDFE3]|\\uD821[\\uDC00-\\uDFF7]|\\uD823[\\uDC00-\\uDCD5\\uDD00-\\uDD08]|\\uD82B[\\uDFF0-\\uDFF3\\uDFF5-\\uDFFB\\uDFFD\\uDFFE]|\\uD82C[\\uDC00-\\uDD22\\uDD50-\\uDD52\\uDD64-\\uDD67\\uDD70-\\uDEFB]|\\uD82F[\\uDC00-\\uDC6A\\uDC70-\\uDC7C\\uDC80-\\uDC88\\uDC90-\\uDC99]|\\uD835[\\uDC00-\\uDC54\\uDC56-\\uDC9C\\uDC9E\\uDC9F\\uDCA2\\uDCA5\\uDCA6\\uDCA9-\\uDCAC\\uDCAE-\\uDCB9\\uDCBB\\uDCBD-\\uDCC3\\uDCC5-\\uDD05\\uDD07-\\uDD0A\\uDD0D-\\uDD14\\uDD16-\\uDD1C\\uDD1E-\\uDD39\\uDD3B-\\uDD3E\\uDD40-\\uDD44\\uDD46\\uDD4A-\\uDD50\\uDD52-\\uDEA5\\uDEA8-\\uDEC0\\uDEC2-\\uDEDA\\uDEDC-\\uDEFA\\uDEFC-\\uDF14\\uDF16-\\uDF34\\uDF36-\\uDF4E\\uDF50-\\uDF6E\\uDF70-\\uDF88\\uDF8A-\\uDFA8\\uDFAA-\\uDFC2\\uDFC4-\\uDFCB]|\\uD837[\\uDF00-\\uDF1E]|\\uD838[\\uDD00-\\uDD2C\\uDD37-\\uDD3D\\uDD4E\\uDE90-\\uDEAD\\uDEC0-\\uDEEB]|\\uD839[\\uDFE0-\\uDFE6\\uDFE8-\\uDFEB\\uDFED\\uDFEE\\uDFF0-\\uDFFE]|\\uD83A[\\uDC00-\\uDCC4\\uDD00-\\uDD43\\uDD4B]|\\uD83B[\\uDE00-\\uDE03\\uDE05-\\uDE1F\\uDE21\\uDE22\\uDE24\\uDE27\\uDE29-\\uDE32\\uDE34-\\uDE37\\uDE39\\uDE3B\\uDE42\\uDE47\\uDE49\\uDE4B\\uDE4D-\\uDE4F\\uDE51\\uDE52\\uDE54\\uDE57\\uDE59\\uDE5B\\uDE5D\\uDE5F\\uDE61\\uDE62\\uDE64\\uDE67-\\uDE6A\\uDE6C-\\uDE72\\uDE74-\\uDE77\\uDE79-\\uDE7C\\uDE7E\\uDE80-\\uDE89\\uDE8B-\\uDE9B\\uDEA1-\\uDEA3\\uDEA5-\\uDEA9\\uDEAB-\\uDEBB]|\\uD869[\\uDC00-\\uDEDF\\uDF00-\\uDFFF]|\\uD86D[\\uDC00-\\uDF38\\uDF40-\\uDFFF]|\\uD86E[\\uDC00-\\uDC1D\\uDC20-\\uDFFF]|\\uD873[\\uDC00-\\uDEA1\\uDEB0-\\uDFFF]|\\uD87A[\\uDC00-\\uDFE0]|\\uD87E[\\uDC00-\\uDE1D]|\\uD884[\\uDC00-\\uDF4A])\\S*/g;\n/**\n * Transforms text to title case.\n * Capitalizes the first letter of each word and transforms the\n * rest of the word to lower case.\n * Words are delimited by any whitespace character, such as a space, tab, or line-feed character.\n *\n * @see `LowerCasePipe`\n * @see `UpperCasePipe`\n *\n * @usageNotes\n * The following example shows the result of transforming various strings into title case.\n *\n * \n *\n * @ngModule CommonModule\n * @publicApi\n */\nclass TitleCasePipe {\n transform(value) {\n if (value == null)\n return null;\n if (typeof value !== 'string') {\n throw invalidPipeArgumentError(TitleCasePipe, value);\n }\n return value.replace(unicodeWordMatch, (txt => txt[0].toUpperCase() + txt.slice(1).toLowerCase()));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: TitleCasePipe, deps: [], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: TitleCasePipe, isStandalone: true, name: \"titlecase\" }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: TitleCasePipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'titlecase',\n standalone: true,\n }]\n }] });\n/**\n * Transforms text to all upper case.\n * @see `LowerCasePipe`\n * @see `TitleCasePipe`\n *\n * @ngModule CommonModule\n * @publicApi\n */\nclass UpperCasePipe {\n transform(value) {\n if (value == null)\n return null;\n if (typeof value !== 'string') {\n throw invalidPipeArgumentError(UpperCasePipe, value);\n }\n return value.toUpperCase();\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: UpperCasePipe, deps: [], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: UpperCasePipe, isStandalone: true, name: \"uppercase\" }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: UpperCasePipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'uppercase',\n standalone: true,\n }]\n }] });\n\n/**\n * The default date format of Angular date pipe, which corresponds to the following format:\n * `'MMM d,y'` (e.g. `Jun 15, 2015`)\n */\nconst DEFAULT_DATE_FORMAT = 'mediumDate';\n\n/**\n * Optionally-provided default timezone to use for all instances of `DatePipe` (such as `'+0430'`).\n * If the value isn't provided, the `DatePipe` will use the end-user's local system timezone.\n *\n * @deprecated use DATE_PIPE_DEFAULT_OPTIONS token to configure DatePipe\n */\nconst DATE_PIPE_DEFAULT_TIMEZONE = new InjectionToken('DATE_PIPE_DEFAULT_TIMEZONE');\n/**\n * DI token that allows to provide default configuration for the `DatePipe` instances in an\n * application. The value is an object which can include the following fields:\n * - `dateFormat`: configures the default date format. If not provided, the `DatePipe`\n * will use the 'mediumDate' as a value.\n * - `timezone`: configures the default timezone. If not provided, the `DatePipe` will\n * use the end-user's local system timezone.\n *\n * @see `DatePipeConfig`\n *\n * @usageNotes\n *\n * Various date pipe default values can be overwritten by providing this token with\n * the value that has this interface.\n *\n * For example:\n *\n * Override the default date format by providing a value using the token:\n * ```typescript\n * providers: [\n * {provide: DATE_PIPE_DEFAULT_OPTIONS, useValue: {dateFormat: 'shortDate'}}\n * ]\n * ```\n *\n * Override the default timezone by providing a value using the token:\n * ```typescript\n * providers: [\n * {provide: DATE_PIPE_DEFAULT_OPTIONS, useValue: {timezone: '-1200'}}\n * ]\n * ```\n */\nconst DATE_PIPE_DEFAULT_OPTIONS = new InjectionToken('DATE_PIPE_DEFAULT_OPTIONS');\n// clang-format off\n/**\n * @ngModule CommonModule\n * @description\n *\n * Formats a date value according to locale rules.\n *\n * `DatePipe` is executed only when it detects a pure change to the input value.\n * A pure change is either a change to a primitive input value\n * (such as `String`, `Number`, `Boolean`, or `Symbol`),\n * or a changed object reference (such as `Date`, `Array`, `Function`, or `Object`).\n *\n * Note that mutating a `Date` object does not cause the pipe to be rendered again.\n * To ensure that the pipe is executed, you must create a new `Date` object.\n *\n * Only the `en-US` locale data comes with Angular. To localize dates\n * in another language, you must import the corresponding locale data.\n * See the [I18n guide](guide/i18n-common-format-data-locale) for more information.\n *\n * The time zone of the formatted value can be specified either by passing it in as the second\n * parameter of the pipe, or by setting the default through the `DATE_PIPE_DEFAULT_OPTIONS`\n * injection token. The value that is passed in as the second parameter takes precedence over\n * the one defined using the injection token.\n *\n * @see `formatDate()`\n *\n *\n * @usageNotes\n *\n * The result of this pipe is not reevaluated when the input is mutated. To avoid the need to\n * reformat the date on every change-detection cycle, treat the date as an immutable object\n * and change the reference when the pipe needs to run again.\n *\n * ### Pre-defined format options\n *\n * | Option | Equivalent to | Examples (given in `en-US` locale) |\n * |---------------|-------------------------------------|-------------------------------------------------|\n * | `'short'` | `'M/d/yy, h:mm a'` | `6/15/15, 9:03 AM` |\n * | `'medium'` | `'MMM d, y, h:mm:ss a'` | `Jun 15, 2015, 9:03:01 AM` |\n * | `'long'` | `'MMMM d, y, h:mm:ss a z'` | `June 15, 2015 at 9:03:01 AM GMT+1` |\n * | `'full'` | `'EEEE, MMMM d, y, h:mm:ss a zzzz'` | `Monday, June 15, 2015 at 9:03:01 AM GMT+01:00` |\n * | `'shortDate'` | `'M/d/yy'` | `6/15/15` |\n * | `'mediumDate'`| `'MMM d, y'` | `Jun 15, 2015` |\n * | `'longDate'` | `'MMMM d, y'` | `June 15, 2015` |\n * | `'fullDate'` | `'EEEE, MMMM d, y'` | `Monday, June 15, 2015` |\n * | `'shortTime'` | `'h:mm a'` | `9:03 AM` |\n * | `'mediumTime'`| `'h:mm:ss a'` | `9:03:01 AM` |\n * | `'longTime'` | `'h:mm:ss a z'` | `9:03:01 AM GMT+1` |\n * | `'fullTime'` | `'h:mm:ss a zzzz'` | `9:03:01 AM GMT+01:00` |\n *\n * ### Custom format options\n *\n * You can construct a format string using symbols to specify the components\n * of a date-time value, as described in the following table.\n * Format details depend on the locale.\n * Fields marked with (*) are only available in the extra data set for the given locale.\n *\n * | Field type | Format | Description | Example Value |\n * |-------------------- |-------------|---------------------------------------------------------------|------------------------------------------------------------|\n * | Era | G, GG & GGG | Abbreviated | AD |\n * | | GGGG | Wide | Anno Domini |\n * | | GGGGG | Narrow | A |\n * | Year | y | Numeric: minimum digits | 2, 20, 201, 2017, 20173 |\n * | | yy | Numeric: 2 digits + zero padded | 02, 20, 01, 17, 73 |\n * | | yyy | Numeric: 3 digits + zero padded | 002, 020, 201, 2017, 20173 |\n * | | yyyy | Numeric: 4 digits or more + zero padded | 0002, 0020, 0201, 2017, 20173 |\n * | Week-numbering year | Y | Numeric: minimum digits | 2, 20, 201, 2017, 20173 |\n * | | YY | Numeric: 2 digits + zero padded | 02, 20, 01, 17, 73 |\n * | | YYY | Numeric: 3 digits + zero padded | 002, 020, 201, 2017, 20173 |\n * | | YYYY | Numeric: 4 digits or more + zero padded | 0002, 0020, 0201, 2017, 20173 |\n * | Month | M | Numeric: 1 digit | 9, 12 |\n * | | MM | Numeric: 2 digits + zero padded | 09, 12 |\n * | | MMM | Abbreviated | Sep |\n * | | MMMM | Wide | September |\n * | | MMMMM | Narrow | S |\n * | Month standalone | L | Numeric: 1 digit | 9, 12 |\n * | | LL | Numeric: 2 digits + zero padded | 09, 12 |\n * | | LLL | Abbreviated | Sep |\n * | | LLLL | Wide | September |\n * | | LLLLL | Narrow | S |\n * | Week of year | w | Numeric: minimum digits | 1... 53 |\n * | | ww | Numeric: 2 digits + zero padded | 01... 53 |\n * | Week of month | W | Numeric: 1 digit | 1... 5 |\n * | Day of month | d | Numeric: minimum digits | 1 |\n * | | dd | Numeric: 2 digits + zero padded | 01 |\n * | Week day | E, EE & EEE | Abbreviated | Tue |\n * | | EEEE | Wide | Tuesday |\n * | | EEEEE | Narrow | T |\n * | | EEEEEE | Short | Tu |\n * | Week day standalone | c, cc | Numeric: 1 digit | 2 |\n * | | ccc | Abbreviated | Tue |\n * | | cccc | Wide | Tuesday |\n * | | ccccc | Narrow | T |\n * | | cccccc | Short | Tu |\n * | Period | a, aa & aaa | Abbreviated | am/pm or AM/PM |\n * | | aaaa | Wide (fallback to `a` when missing) | ante meridiem/post meridiem |\n * | | aaaaa | Narrow | a/p |\n * | Period* | B, BB & BBB | Abbreviated | mid. |\n * | | BBBB | Wide | am, pm, midnight, noon, morning, afternoon, evening, night |\n * | | BBBBB | Narrow | md |\n * | Period standalone* | b, bb & bbb | Abbreviated | mid. |\n * | | bbbb | Wide | am, pm, midnight, noon, morning, afternoon, evening, night |\n * | | bbbbb | Narrow | md |\n * | Hour 1-12 | h | Numeric: minimum digits | 1, 12 |\n * | | hh | Numeric: 2 digits + zero padded | 01, 12 |\n * | Hour 0-23 | H | Numeric: minimum digits | 0, 23 |\n * | | HH | Numeric: 2 digits + zero padded | 00, 23 |\n * | Minute | m | Numeric: minimum digits | 8, 59 |\n * | | mm | Numeric: 2 digits + zero padded | 08, 59 |\n * | Second | s | Numeric: minimum digits | 0... 59 |\n * | | ss | Numeric: 2 digits + zero padded | 00... 59 |\n * | Fractional seconds | S | Numeric: 1 digit | 0... 9 |\n * | | SS | Numeric: 2 digits + zero padded | 00... 99 |\n * | | SSS | Numeric: 3 digits + zero padded (= milliseconds) | 000... 999 |\n * | Zone | z, zz & zzz | Short specific non location format (fallback to O) | GMT-8 |\n * | | zzzz | Long specific non location format (fallback to OOOO) | GMT-08:00 |\n * | | Z, ZZ & ZZZ | ISO8601 basic format | -0800 |\n * | | ZZZZ | Long localized GMT format | GMT-8:00 |\n * | | ZZZZZ | ISO8601 extended format + Z indicator for offset 0 (= XXXXX) | -08:00 |\n * | | O, OO & OOO | Short localized GMT format | GMT-8 |\n * | | OOOO | Long localized GMT format | GMT-08:00 |\n *\n *\n * ### Format examples\n *\n * These examples transform a date into various formats,\n * assuming that `dateObj` is a JavaScript `Date` object for\n * year: 2015, month: 6, day: 15, hour: 21, minute: 43, second: 11,\n * given in the local time for the `en-US` locale.\n *\n * ```\n * {{ dateObj | date }} // output is 'Jun 15, 2015'\n * {{ dateObj | date:'medium' }} // output is 'Jun 15, 2015, 9:43:11 PM'\n * {{ dateObj | date:'shortTime' }} // output is '9:43 PM'\n * {{ dateObj | date:'mm:ss' }} // output is '43:11'\n * ```\n *\n * ### Usage example\n *\n * The following component uses a date pipe to display the current date in different formats.\n *\n * ```\n * @Component({\n * selector: 'date-pipe',\n * template: `\n *
Today is {{today | date}}
\n *
Or if you prefer, {{today | date:'fullDate'}}
\n *
The time is {{today | date:'h:mm a z'}}
\n *
\n *\n * ```\n * {minIntegerDigits}.{minFractionDigits}-{maxFractionDigits}\n * ```\n *\n * - `minIntegerDigits`:\n * The minimum number of integer digits before the decimal point.\n * Default is 1.\n *\n * - `minFractionDigits`:\n * The minimum number of digits after the decimal point.\n * Default is 0.\n *\n * - `maxFractionDigits`:\n * The maximum number of digits after the decimal point.\n * Default is 3.\n *\n * If the formatted value is truncated it will be rounded using the \"to-nearest\" method:\n *\n * ```\n * {{3.6 | number: '1.0-0'}}\n * \n *\n * {{-3.6 | number:'1.0-0'}}\n * \n * ```\n *\n * ### locale\n *\n * `locale` will format a value according to locale rules.\n * Locale determines group sizing and separator,\n * decimal point character, and other locale-specific configurations.\n *\n * When not supplied, uses the value of `LOCALE_ID`, which is `en-US` by default.\n *\n * See [Setting your app locale](guide/i18n-common-locale-id).\n *\n * ### Example\n *\n * The following code shows how the pipe transforms values\n * according to various format specifications,\n * where the caller's default locale is `en-US`.\n *\n * \n *\n * @publicApi\n */\nclass DecimalPipe {\n constructor(_locale) {\n this._locale = _locale;\n }\n /**\n * @param value The value to be formatted.\n * @param digitsInfo Sets digit and decimal representation.\n * [See more](#digitsinfo).\n * @param locale Specifies what locale format rules to use.\n * [See more](#locale).\n */\n transform(value, digitsInfo, locale) {\n if (!isValue(value))\n return null;\n locale = locale || this._locale;\n try {\n const num = strToNumber(value);\n return formatNumber(num, locale, digitsInfo);\n }\n catch (error) {\n throw invalidPipeArgumentError(DecimalPipe, error.message);\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: DecimalPipe, deps: [{ token: LOCALE_ID }], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: DecimalPipe, isStandalone: true, name: \"number\" }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: DecimalPipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'number',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: undefined, decorators: [{\n type: Inject,\n args: [LOCALE_ID]\n }] }]; } });\n/**\n * @ngModule CommonModule\n * @description\n *\n * Transforms a number to a percentage\n * string, formatted according to locale rules that determine group sizing and\n * separator, decimal-point character, and other locale-specific\n * configurations.\n *\n * @see `formatPercent()`\n *\n * @usageNotes\n * The following code shows how the pipe transforms numbers\n * into text strings, according to various format specifications,\n * where the caller's default locale is `en-US`.\n *\n * \n *\n * @publicApi\n */\nclass PercentPipe {\n constructor(_locale) {\n this._locale = _locale;\n }\n /**\n *\n * @param value The number to be formatted as a percentage.\n * @param digitsInfo Decimal representation options, specified by a string\n * in the following format:
\n * {minIntegerDigits}.{minFractionDigits}-{maxFractionDigits}.\n * - `minIntegerDigits`: The minimum number of integer digits before the decimal point.\n * Default is `1`.\n * - `minFractionDigits`: The minimum number of digits after the decimal point.\n * Default is `0`.\n * - `maxFractionDigits`: The maximum number of digits after the decimal point.\n * Default is `0`.\n * @param locale A locale code for the locale format rules to use.\n * When not supplied, uses the value of `LOCALE_ID`, which is `en-US` by default.\n * See [Setting your app locale](guide/i18n-common-locale-id).\n */\n transform(value, digitsInfo, locale) {\n if (!isValue(value))\n return null;\n locale = locale || this._locale;\n try {\n const num = strToNumber(value);\n return formatPercent(num, locale, digitsInfo);\n }\n catch (error) {\n throw invalidPipeArgumentError(PercentPipe, error.message);\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PercentPipe, deps: [{ token: LOCALE_ID }], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: PercentPipe, isStandalone: true, name: \"percent\" }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PercentPipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'percent',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: undefined, decorators: [{\n type: Inject,\n args: [LOCALE_ID]\n }] }]; } });\n/**\n * @ngModule CommonModule\n * @description\n *\n * Transforms a number to a currency string, formatted according to locale rules\n * that determine group sizing and separator, decimal-point character,\n * and other locale-specific configurations.\n *\n *\n * @see `getCurrencySymbol()`\n * @see `formatCurrency()`\n *\n * @usageNotes\n * The following code shows how the pipe transforms numbers\n * into text strings, according to various format specifications,\n * where the caller's default locale is `en-US`.\n *\n * \n *\n * @publicApi\n */\nclass CurrencyPipe {\n constructor(_locale, _defaultCurrencyCode = 'USD') {\n this._locale = _locale;\n this._defaultCurrencyCode = _defaultCurrencyCode;\n }\n /**\n *\n * @param value The number to be formatted as currency.\n * @param currencyCode The [ISO 4217](https://en.wikipedia.org/wiki/ISO_4217) currency code,\n * such as `USD` for the US dollar and `EUR` for the euro. The default currency code can be\n * configured using the `DEFAULT_CURRENCY_CODE` injection token.\n * @param display The format for the currency indicator. One of the following:\n * - `code`: Show the code (such as `USD`).\n * - `symbol`(default): Show the symbol (such as `$`).\n * - `symbol-narrow`: Use the narrow symbol for locales that have two symbols for their\n * currency.\n * For example, the Canadian dollar CAD has the symbol `CA$` and the symbol-narrow `$`. If the\n * locale has no narrow symbol, uses the standard symbol for the locale.\n * - String: Use the given string value instead of a code or a symbol.\n * For example, an empty string will suppress the currency & symbol.\n * - Boolean (marked deprecated in v5): `true` for symbol and false for `code`.\n *\n * @param digitsInfo Decimal representation options, specified by a string\n * in the following format:
\n * {minIntegerDigits}.{minFractionDigits}-{maxFractionDigits}.\n * - `minIntegerDigits`: The minimum number of integer digits before the decimal point.\n * Default is `1`.\n * - `minFractionDigits`: The minimum number of digits after the decimal point.\n * Default is `2`.\n * - `maxFractionDigits`: The maximum number of digits after the decimal point.\n * Default is `2`.\n * If not provided, the number will be formatted with the proper amount of digits,\n * depending on what the [ISO 4217](https://en.wikipedia.org/wiki/ISO_4217) specifies.\n * For example, the Canadian dollar has 2 digits, whereas the Chilean peso has none.\n * @param locale A locale code for the locale format rules to use.\n * When not supplied, uses the value of `LOCALE_ID`, which is `en-US` by default.\n * See [Setting your app locale](guide/i18n-common-locale-id).\n */\n transform(value, currencyCode = this._defaultCurrencyCode, display = 'symbol', digitsInfo, locale) {\n if (!isValue(value))\n return null;\n locale = locale || this._locale;\n if (typeof display === 'boolean') {\n if ((typeof ngDevMode === 'undefined' || ngDevMode) && console && console.warn) {\n console.warn(`Warning: the currency pipe has been changed in Angular v5. The symbolDisplay option (third parameter) is now a string instead of a boolean. The accepted values are \"code\", \"symbol\" or \"symbol-narrow\".`);\n }\n display = display ? 'symbol' : 'code';\n }\n let currency = currencyCode || this._defaultCurrencyCode;\n if (display !== 'code') {\n if (display === 'symbol' || display === 'symbol-narrow') {\n currency = getCurrencySymbol(currency, display === 'symbol' ? 'wide' : 'narrow', locale);\n }\n else {\n currency = display;\n }\n }\n try {\n const num = strToNumber(value);\n return formatCurrency(num, locale, currency, currencyCode, digitsInfo);\n }\n catch (error) {\n throw invalidPipeArgumentError(CurrencyPipe, error.message);\n }\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: CurrencyPipe, deps: [{ token: LOCALE_ID }, { token: DEFAULT_CURRENCY_CODE }], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: CurrencyPipe, isStandalone: true, name: \"currency\" }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: CurrencyPipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'currency',\n standalone: true,\n }]\n }], ctorParameters: function () { return [{ type: undefined, decorators: [{\n type: Inject,\n args: [LOCALE_ID]\n }] }, { type: undefined, decorators: [{\n type: Inject,\n args: [DEFAULT_CURRENCY_CODE]\n }] }]; } });\nfunction isValue(value) {\n return !(value == null || value === '' || value !== value);\n}\n/**\n * Transforms a string into a number (if needed).\n */\nfunction strToNumber(value) {\n // Convert strings to numbers\n if (typeof value === 'string' && !isNaN(Number(value) - parseFloat(value))) {\n return Number(value);\n }\n if (typeof value !== 'number') {\n throw new Error(`${value} is not a number`);\n }\n return value;\n}\n\n/**\n * @ngModule CommonModule\n * @description\n *\n * Creates a new `Array` or `String` containing a subset (slice) of the elements.\n *\n * @usageNotes\n *\n * All behavior is based on the expected behavior of the JavaScript API `Array.prototype.slice()`\n * and `String.prototype.slice()`.\n *\n * When operating on an `Array`, the returned `Array` is always a copy even when all\n * the elements are being returned.\n *\n * When operating on a blank value, the pipe returns the blank value.\n *\n * ### List Example\n *\n * This `ngFor` example:\n *\n * {@example common/pipes/ts/slice_pipe.ts region='SlicePipe_list'}\n *\n * produces the following:\n *\n * ```html\n * b\n * c\n * ```\n *\n * ### String Examples\n *\n * {@example common/pipes/ts/slice_pipe.ts region='SlicePipe_string'}\n *\n * @publicApi\n */\nclass SlicePipe {\n transform(value, start, end) {\n if (value == null)\n return null;\n if (!this.supports(value)) {\n throw invalidPipeArgumentError(SlicePipe, value);\n }\n return value.slice(start, end);\n }\n supports(obj) {\n return typeof obj === 'string' || Array.isArray(obj);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: SlicePipe, deps: [], target: i0.ɵɵFactoryTarget.Pipe }); }\n static { this.ɵpipe = i0.ɵɵngDeclarePipe({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: SlicePipe, isStandalone: true, name: \"slice\", pure: false }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: SlicePipe, decorators: [{\n type: Pipe,\n args: [{\n name: 'slice',\n pure: false,\n standalone: true,\n }]\n }] });\n\n/**\n * @module\n * @description\n * This module provides a set of common Pipes.\n */\n/**\n * A collection of Angular pipes that are likely to be used in each and every application.\n */\nconst COMMON_PIPES = [\n AsyncPipe,\n UpperCasePipe,\n LowerCasePipe,\n JsonPipe,\n SlicePipe,\n DecimalPipe,\n PercentPipe,\n TitleCasePipe,\n CurrencyPipe,\n DatePipe,\n I18nPluralPipe,\n I18nSelectPipe,\n KeyValuePipe,\n];\n\n// Note: This does not contain the location providers,\n// as they need some platform specific implementations to work.\n/**\n * Exports all the basic Angular directives and pipes,\n * such as `NgIf`, `NgForOf`, `DecimalPipe`, and so on.\n * Re-exported by `BrowserModule`, which is included automatically in the root\n * `AppModule` when you create a new app with the CLI `new` command.\n *\n * @publicApi\n */\nclass CommonModule {\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: CommonModule, deps: [], target: i0.ɵɵFactoryTarget.NgModule }); }\n static { this.ɵmod = i0.ɵɵngDeclareNgModule({ minVersion: \"14.0.0\", version: \"16.0.1\", ngImport: i0, type: CommonModule, imports: [NgClass, NgComponentOutlet, NgForOf, NgIf, NgTemplateOutlet, NgStyle, NgSwitch, NgSwitchCase, NgSwitchDefault, NgPlural, NgPluralCase, AsyncPipe, UpperCasePipe, LowerCasePipe, JsonPipe, SlicePipe, DecimalPipe, PercentPipe, TitleCasePipe, CurrencyPipe, DatePipe, I18nPluralPipe, I18nSelectPipe, KeyValuePipe], exports: [NgClass, NgComponentOutlet, NgForOf, NgIf, NgTemplateOutlet, NgStyle, NgSwitch, NgSwitchCase, NgSwitchDefault, NgPlural, NgPluralCase, AsyncPipe, UpperCasePipe, LowerCasePipe, JsonPipe, SlicePipe, DecimalPipe, PercentPipe, TitleCasePipe, CurrencyPipe, DatePipe, I18nPluralPipe, I18nSelectPipe, KeyValuePipe] }); }\n static { this.ɵinj = i0.ɵɵngDeclareInjector({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: CommonModule }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: CommonModule, decorators: [{\n type: NgModule,\n args: [{\n imports: [COMMON_DIRECTIVES, COMMON_PIPES],\n exports: [COMMON_DIRECTIVES, COMMON_PIPES],\n }]\n }] });\n\nconst PLATFORM_BROWSER_ID = 'browser';\nconst PLATFORM_SERVER_ID = 'server';\nconst PLATFORM_WORKER_APP_ID = 'browserWorkerApp';\nconst PLATFORM_WORKER_UI_ID = 'browserWorkerUi';\n/**\n * Returns whether a platform id represents a browser platform.\n * @publicApi\n */\nfunction isPlatformBrowser(platformId) {\n return platformId === PLATFORM_BROWSER_ID;\n}\n/**\n * Returns whether a platform id represents a server platform.\n * @publicApi\n */\nfunction isPlatformServer(platformId) {\n return platformId === PLATFORM_SERVER_ID;\n}\n/**\n * Returns whether a platform id represents a web worker app platform.\n * @publicApi\n * @deprecated This function serves no purpose since the removal of the Webworker platform. It will\n * always return `false`.\n */\nfunction isPlatformWorkerApp(platformId) {\n return platformId === PLATFORM_WORKER_APP_ID;\n}\n/**\n * Returns whether a platform id represents a web worker UI platform.\n * @publicApi\n * @deprecated This function serves no purpose since the removal of the Webworker platform. It will\n * always return `false`.\n */\nfunction isPlatformWorkerUi(platformId) {\n return platformId === PLATFORM_WORKER_UI_ID;\n}\n\n/**\n * @module\n * @description\n * Entry point for all public APIs of the common package.\n */\n/**\n * @publicApi\n */\nconst VERSION = new Version('16.0.1');\n\n/**\n * Defines a scroll position manager. Implemented by `BrowserViewportScroller`.\n *\n * @publicApi\n */\nclass ViewportScroller {\n // De-sugared tree-shakable injection\n // See #23917\n /** @nocollapse */\n static { this.ɵprov = ɵɵdefineInjectable({\n token: ViewportScroller,\n providedIn: 'root',\n factory: () => new BrowserViewportScroller(ɵɵinject(DOCUMENT), window)\n }); }\n}\n/**\n * Manages the scroll position for a browser window.\n */\nclass BrowserViewportScroller {\n constructor(document, window) {\n this.document = document;\n this.window = window;\n this.offset = () => [0, 0];\n }\n /**\n * Configures the top offset used when scrolling to an anchor.\n * @param offset A position in screen coordinates (a tuple with x and y values)\n * or a function that returns the top offset position.\n *\n */\n setOffset(offset) {\n if (Array.isArray(offset)) {\n this.offset = () => offset;\n }\n else {\n this.offset = offset;\n }\n }\n /**\n * Retrieves the current scroll position.\n * @returns The position in screen coordinates.\n */\n getScrollPosition() {\n if (this.supportsScrolling()) {\n return [this.window.pageXOffset, this.window.pageYOffset];\n }\n else {\n return [0, 0];\n }\n }\n /**\n * Sets the scroll position.\n * @param position The new position in screen coordinates.\n */\n scrollToPosition(position) {\n if (this.supportsScrolling()) {\n this.window.scrollTo(position[0], position[1]);\n }\n }\n /**\n * Scrolls to an element and attempts to focus the element.\n *\n * Note that the function name here is misleading in that the target string may be an ID for a\n * non-anchor element.\n *\n * @param target The ID of an element or name of the anchor.\n *\n * @see https://html.spec.whatwg.org/#the-indicated-part-of-the-document\n * @see https://html.spec.whatwg.org/#scroll-to-fragid\n */\n scrollToAnchor(target) {\n if (!this.supportsScrolling()) {\n return;\n }\n const elSelected = findAnchorFromDocument(this.document, target);\n if (elSelected) {\n this.scrollToElement(elSelected);\n // After scrolling to the element, the spec dictates that we follow the focus steps for the\n // target. Rather than following the robust steps, simply attempt focus.\n //\n // @see https://html.spec.whatwg.org/#get-the-focusable-area\n // @see https://developer.mozilla.org/en-US/docs/Web/API/HTMLOrForeignElement/focus\n // @see https://html.spec.whatwg.org/#focusable-area\n elSelected.focus();\n }\n }\n /**\n * Disables automatic scroll restoration provided by the browser.\n */\n setHistoryScrollRestoration(scrollRestoration) {\n if (this.supportScrollRestoration()) {\n const history = this.window.history;\n if (history && history.scrollRestoration) {\n history.scrollRestoration = scrollRestoration;\n }\n }\n }\n /**\n * Scrolls to an element using the native offset and the specified offset set on this scroller.\n *\n * The offset can be used when we know that there is a floating header and scrolling naively to an\n * element (ex: `scrollIntoView`) leaves the element hidden behind the floating header.\n */\n scrollToElement(el) {\n const rect = el.getBoundingClientRect();\n const left = rect.left + this.window.pageXOffset;\n const top = rect.top + this.window.pageYOffset;\n const offset = this.offset();\n this.window.scrollTo(left - offset[0], top - offset[1]);\n }\n /**\n * We only support scroll restoration when we can get a hold of window.\n * This means that we do not support this behavior when running in a web worker.\n *\n * Lifting this restriction right now would require more changes in the dom adapter.\n * Since webworkers aren't widely used, we will lift it once RouterScroller is\n * battle-tested.\n */\n supportScrollRestoration() {\n try {\n if (!this.supportsScrolling()) {\n return false;\n }\n // The `scrollRestoration` property could be on the `history` instance or its prototype.\n const scrollRestorationDescriptor = getScrollRestorationProperty(this.window.history) ||\n getScrollRestorationProperty(Object.getPrototypeOf(this.window.history));\n // We can write to the `scrollRestoration` property if it is a writable data field or it has a\n // setter function.\n return !!scrollRestorationDescriptor &&\n !!(scrollRestorationDescriptor.writable || scrollRestorationDescriptor.set);\n }\n catch {\n return false;\n }\n }\n supportsScrolling() {\n try {\n return !!this.window && !!this.window.scrollTo && 'pageXOffset' in this.window;\n }\n catch {\n return false;\n }\n }\n}\nfunction getScrollRestorationProperty(obj) {\n return Object.getOwnPropertyDescriptor(obj, 'scrollRestoration');\n}\nfunction findAnchorFromDocument(document, target) {\n const documentResult = document.getElementById(target) || document.getElementsByName(target)[0];\n if (documentResult) {\n return documentResult;\n }\n // `getElementById` and `getElementsByName` won't pierce through the shadow DOM so we\n // have to traverse the DOM manually and do the lookup through the shadow roots.\n if (typeof document.createTreeWalker === 'function' && document.body &&\n typeof document.body.attachShadow === 'function') {\n const treeWalker = document.createTreeWalker(document.body, NodeFilter.SHOW_ELEMENT);\n let currentNode = treeWalker.currentNode;\n while (currentNode) {\n const shadowRoot = currentNode.shadowRoot;\n if (shadowRoot) {\n // Note that `ShadowRoot` doesn't support `getElementsByName`\n // so we have to fall back to `querySelector`.\n const result = shadowRoot.getElementById(target) || shadowRoot.querySelector(`[name=\"${target}\"]`);\n if (result) {\n return result;\n }\n }\n currentNode = treeWalker.nextNode();\n }\n }\n return null;\n}\n/**\n * Provides an empty implementation of the viewport scroller.\n */\nclass NullViewportScroller {\n /**\n * Empty implementation\n */\n setOffset(offset) { }\n /**\n * Empty implementation\n */\n getScrollPosition() {\n return [0, 0];\n }\n /**\n * Empty implementation\n */\n scrollToPosition(position) { }\n /**\n * Empty implementation\n */\n scrollToAnchor(anchor) { }\n /**\n * Empty implementation\n */\n setHistoryScrollRestoration(scrollRestoration) { }\n}\n\n/**\n * A wrapper around the `XMLHttpRequest` constructor.\n *\n * @publicApi\n */\nclass XhrFactory {\n}\n\n// Converts a string that represents a URL into a URL class instance.\nfunction getUrl(src, win) {\n // Don't use a base URL is the URL is absolute.\n return isAbsoluteUrl(src) ? new URL(src) : new URL(src, win.location.href);\n}\n// Checks whether a URL is absolute (i.e. starts with `http://` or `https://`).\nfunction isAbsoluteUrl(src) {\n return /^https?:\\/\\//.test(src);\n}\n// Given a URL, extract the hostname part.\n// If a URL is a relative one - the URL is returned as is.\nfunction extractHostname(url) {\n return isAbsoluteUrl(url) ? (new URL(url)).hostname : url;\n}\nfunction isValidPath(path) {\n const isString = typeof path === 'string';\n if (!isString || path.trim() === '') {\n return false;\n }\n // Calling new URL() will throw if the path string is malformed\n try {\n const url = new URL(path);\n return true;\n }\n catch {\n return false;\n }\n}\nfunction normalizePath(path) {\n return path.endsWith('/') ? path.slice(0, -1) : path;\n}\nfunction normalizeSrc(src) {\n return src.startsWith('/') ? src.slice(1) : src;\n}\n\n/**\n * Noop image loader that does no transformation to the original src and just returns it as is.\n * This loader is used as a default one if more specific logic is not provided in an app config.\n *\n * @see `ImageLoader`\n * @see `NgOptimizedImage`\n */\nconst noopImageLoader = (config) => config.src;\n/**\n * Injection token that configures the image loader function.\n *\n * @see `ImageLoader`\n * @see `NgOptimizedImage`\n * @publicApi\n */\nconst IMAGE_LOADER = new InjectionToken('ImageLoader', {\n providedIn: 'root',\n factory: () => noopImageLoader,\n});\n/**\n * Internal helper function that makes it easier to introduce custom image loaders for the\n * `NgOptimizedImage` directive. It is enough to specify a URL builder function to obtain full DI\n * configuration for a given loader: a DI token corresponding to the actual loader function, plus DI\n * tokens managing preconnect check functionality.\n * @param buildUrlFn a function returning a full URL based on loader's configuration\n * @param exampleUrls example of full URLs for a given loader (used in error messages)\n * @returns a set of DI providers corresponding to the configured image loader\n */\nfunction createImageLoader(buildUrlFn, exampleUrls) {\n return function provideImageLoader(path) {\n if (!isValidPath(path)) {\n throwInvalidPathError(path, exampleUrls || []);\n }\n // The trailing / is stripped (if provided) to make URL construction (concatenation) easier in\n // the individual loader functions.\n path = normalizePath(path);\n const loaderFn = (config) => {\n if (isAbsoluteUrl(config.src)) {\n // Image loader functions expect an image file name (e.g. `my-image.png`)\n // or a relative path + a file name (e.g. `/a/b/c/my-image.png`) as an input,\n // so the final absolute URL can be constructed.\n // When an absolute URL is provided instead - the loader can not\n // build a final URL, thus the error is thrown to indicate that.\n throwUnexpectedAbsoluteUrlError(path, config.src);\n }\n return buildUrlFn(path, { ...config, src: normalizeSrc(config.src) });\n };\n const providers = [{ provide: IMAGE_LOADER, useValue: loaderFn }];\n return providers;\n };\n}\nfunction throwInvalidPathError(path, exampleUrls) {\n throw new ɵRuntimeError(2959 /* RuntimeErrorCode.INVALID_LOADER_ARGUMENTS */, ngDevMode &&\n `Image loader has detected an invalid path (\\`${path}\\`). ` +\n `To fix this, supply a path using one of the following formats: ${exampleUrls.join(' or ')}`);\n}\nfunction throwUnexpectedAbsoluteUrlError(path, url) {\n throw new ɵRuntimeError(2959 /* RuntimeErrorCode.INVALID_LOADER_ARGUMENTS */, ngDevMode &&\n `Image loader has detected a \\`![]()
\\` tag with an invalid \\`ngSrc\\` attribute: ${url}. ` +\n `This image loader expects \\`ngSrc\\` to be a relative URL - ` +\n `however the provided value is an absolute URL. ` +\n `To fix this, provide \\`ngSrc\\` as a path relative to the base URL ` +\n `configured for this loader (\\`${path}\\`).`);\n}\n\n/**\n * Function that generates an ImageLoader for [Cloudflare Image\n * Resizing](https://developers.cloudflare.com/images/image-resizing/) and turns it into an Angular\n * provider. Note: Cloudflare has multiple image products - this provider is specifically for\n * Cloudflare Image Resizing; it will not work with Cloudflare Images or Cloudflare Polish.\n *\n * @param path Your domain name, e.g. https://mysite.com\n * @returns Provider that provides an ImageLoader function\n *\n * @publicApi\n */\nconst provideCloudflareLoader = createImageLoader(createCloudflareUrl, ngDevMode ? ['https:///cdn-cgi/image//'] : undefined);\nfunction createCloudflareUrl(path, config) {\n let params = `format=auto`;\n if (config.width) {\n params += `,width=${config.width}`;\n }\n // Cloudflare image URLs format:\n // https://developers.cloudflare.com/images/image-resizing/url-format/\n return `${path}/cdn-cgi/image/${params}/${config.src}`;\n}\n\n/**\n * Name and URL tester for Cloudinary.\n */\nconst cloudinaryLoaderInfo = {\n name: 'Cloudinary',\n testUrl: isCloudinaryUrl\n};\nconst CLOUDINARY_LOADER_REGEX = /https?\\:\\/\\/[^\\/]+\\.cloudinary\\.com\\/.+/;\n/**\n * Tests whether a URL is from Cloudinary CDN.\n */\nfunction isCloudinaryUrl(url) {\n return CLOUDINARY_LOADER_REGEX.test(url);\n}\n/**\n * Function that generates an ImageLoader for Cloudinary and turns it into an Angular provider.\n *\n * @param path Base URL of your Cloudinary images\n * This URL should match one of the following formats:\n * https://res.cloudinary.com/mysite\n * https://mysite.cloudinary.com\n * https://subdomain.mysite.com\n * @returns Set of providers to configure the Cloudinary loader.\n *\n * @publicApi\n */\nconst provideCloudinaryLoader = createImageLoader(createCloudinaryUrl, ngDevMode ?\n [\n 'https://res.cloudinary.com/mysite', 'https://mysite.cloudinary.com',\n 'https://subdomain.mysite.com'\n ] :\n undefined);\nfunction createCloudinaryUrl(path, config) {\n // Cloudinary image URLformat:\n // https://cloudinary.com/documentation/image_transformations#transformation_url_structure\n // Example of a Cloudinary image URL:\n // https://res.cloudinary.com/mysite/image/upload/c_scale,f_auto,q_auto,w_600/marketing/tile-topics-m.png\n let params = `f_auto,q_auto`; // sets image format and quality to \"auto\"\n if (config.width) {\n params += `,w_${config.width}`;\n }\n return `${path}/image/upload/${params}/${config.src}`;\n}\n\n/**\n * Name and URL tester for ImageKit.\n */\nconst imageKitLoaderInfo = {\n name: 'ImageKit',\n testUrl: isImageKitUrl,\n};\nconst IMAGE_KIT_LOADER_REGEX = /https?\\:\\/\\/[^\\/]+\\.imagekit\\.io\\/.+/;\n/**\n * Tests whether a URL is from ImageKit CDN.\n */\nfunction isImageKitUrl(url) {\n return IMAGE_KIT_LOADER_REGEX.test(url);\n}\n/**\n * Function that generates an ImageLoader for ImageKit and turns it into an Angular provider.\n *\n * @param path Base URL of your ImageKit images\n * This URL should match one of the following formats:\n * https://ik.imagekit.io/myaccount\n * https://subdomain.mysite.com\n * @returns Set of providers to configure the ImageKit loader.\n *\n * @publicApi\n */\nconst provideImageKitLoader = createImageLoader(createImagekitUrl, ngDevMode ? ['https://ik.imagekit.io/mysite', 'https://subdomain.mysite.com'] : undefined);\nfunction createImagekitUrl(path, config) {\n // Example of an ImageKit image URL:\n // https://ik.imagekit.io/demo/tr:w-300,h-300/medium_cafe_B1iTdD0C.jpg\n const { src, width } = config;\n let urlSegments;\n if (width) {\n const params = `tr:w-${width}`;\n urlSegments = [path, params, src];\n }\n else {\n urlSegments = [path, src];\n }\n return urlSegments.join('/');\n}\n\n/**\n * Name and URL tester for Imgix.\n */\nconst imgixLoaderInfo = {\n name: 'Imgix',\n testUrl: isImgixUrl\n};\nconst IMGIX_LOADER_REGEX = /https?\\:\\/\\/[^\\/]+\\.imgix\\.net\\/.+/;\n/**\n * Tests whether a URL is from Imgix CDN.\n */\nfunction isImgixUrl(url) {\n return IMGIX_LOADER_REGEX.test(url);\n}\n/**\n * Function that generates an ImageLoader for Imgix and turns it into an Angular provider.\n *\n * @param path path to the desired Imgix origin,\n * e.g. https://somepath.imgix.net or https://images.mysite.com\n * @returns Set of providers to configure the Imgix loader.\n *\n * @publicApi\n */\nconst provideImgixLoader = createImageLoader(createImgixUrl, ngDevMode ? ['https://somepath.imgix.net/'] : undefined);\nfunction createImgixUrl(path, config) {\n const url = new URL(`${path}/${config.src}`);\n // This setting ensures the smallest allowable format is set.\n url.searchParams.set('auto', 'format');\n if (config.width) {\n url.searchParams.set('w', config.width.toString());\n }\n return url.href;\n}\n\n// Assembles directive details string, useful for error messages.\nfunction imgDirectiveDetails(ngSrc, includeNgSrc = true) {\n const ngSrcInfo = includeNgSrc ? `(activated on an ![]()
element with the \\`ngSrc=\"${ngSrc}\"\\`) ` : '';\n return `The NgOptimizedImage directive ${ngSrcInfo}has detected that`;\n}\n\n/**\n * Asserts that the application is in development mode. Throws an error if the application is in\n * production mode. This assert can be used to make sure that there is no dev-mode code invoked in\n * the prod mode accidentally.\n */\nfunction assertDevMode(checkName) {\n if (!ngDevMode) {\n throw new ɵRuntimeError(2958 /* RuntimeErrorCode.UNEXPECTED_DEV_MODE_CHECK_IN_PROD_MODE */, `Unexpected invocation of the ${checkName} in the prod mode. ` +\n `Please make sure that the prod mode is enabled for production builds.`);\n }\n}\n\n/**\n * Observer that detects whether an image with `NgOptimizedImage`\n * is treated as a Largest Contentful Paint (LCP) element. If so,\n * asserts that the image has the `priority` attribute.\n *\n * Note: this is a dev-mode only class and it does not appear in prod bundles,\n * thus there is no `ngDevMode` use in the code.\n *\n * Based on https://web.dev/lcp/#measure-lcp-in-javascript.\n */\nclass LCPImageObserver {\n constructor() {\n // Map of full image URLs -> original `ngSrc` values.\n this.images = new Map();\n // Keep track of images for which `console.warn` was produced.\n this.alreadyWarned = new Set();\n this.window = null;\n this.observer = null;\n assertDevMode('LCP checker');\n const win = inject(DOCUMENT).defaultView;\n if (typeof win !== 'undefined' && typeof PerformanceObserver !== 'undefined') {\n this.window = win;\n this.observer = this.initPerformanceObserver();\n }\n }\n /**\n * Inits PerformanceObserver and subscribes to LCP events.\n * Based on https://web.dev/lcp/#measure-lcp-in-javascript\n */\n initPerformanceObserver() {\n const observer = new PerformanceObserver((entryList) => {\n const entries = entryList.getEntries();\n if (entries.length === 0)\n return;\n // We use the latest entry produced by the `PerformanceObserver` as the best\n // signal on which element is actually an LCP one. As an example, the first image to load on\n // a page, by virtue of being the only thing on the page so far, is often a LCP candidate\n // and gets reported by PerformanceObserver, but isn't necessarily the LCP element.\n const lcpElement = entries[entries.length - 1];\n // Cast to `any` due to missing `element` on the `LargestContentfulPaint` type of entry.\n // See https://developer.mozilla.org/en-US/docs/Web/API/LargestContentfulPaint\n const imgSrc = lcpElement.element?.src ?? '';\n // Exclude `data:` and `blob:` URLs, since they are not supported by the directive.\n if (imgSrc.startsWith('data:') || imgSrc.startsWith('blob:'))\n return;\n const imgNgSrc = this.images.get(imgSrc);\n if (imgNgSrc && !this.alreadyWarned.has(imgSrc)) {\n this.alreadyWarned.add(imgSrc);\n logMissingPriorityWarning(imgSrc);\n }\n });\n observer.observe({ type: 'largest-contentful-paint', buffered: true });\n return observer;\n }\n registerImage(rewrittenSrc, originalNgSrc) {\n if (!this.observer)\n return;\n this.images.set(getUrl(rewrittenSrc, this.window).href, originalNgSrc);\n }\n unregisterImage(rewrittenSrc) {\n if (!this.observer)\n return;\n this.images.delete(getUrl(rewrittenSrc, this.window).href);\n }\n ngOnDestroy() {\n if (!this.observer)\n return;\n this.observer.disconnect();\n this.images.clear();\n this.alreadyWarned.clear();\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LCPImageObserver, deps: [], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LCPImageObserver, providedIn: 'root' }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: LCPImageObserver, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root' }]\n }], ctorParameters: function () { return []; } });\nfunction logMissingPriorityWarning(ngSrc) {\n const directiveDetails = imgDirectiveDetails(ngSrc);\n console.warn(ɵformatRuntimeError(2955 /* RuntimeErrorCode.LCP_IMG_MISSING_PRIORITY */, `${directiveDetails} this image is the Largest Contentful Paint (LCP) ` +\n `element but was not marked \"priority\". This image should be marked ` +\n `\"priority\" in order to prioritize its loading. ` +\n `To fix this, add the \"priority\" attribute.`));\n}\n\n// Set of origins that are always excluded from the preconnect checks.\nconst INTERNAL_PRECONNECT_CHECK_BLOCKLIST = new Set(['localhost', '127.0.0.1', '0.0.0.0']);\n/**\n * Injection token to configure which origins should be excluded\n * from the preconnect checks. It can either be a single string or an array of strings\n * to represent a group of origins, for example:\n *\n * ```typescript\n * {provide: PRECONNECT_CHECK_BLOCKLIST, useValue: 'https://your-domain.com'}\n * ```\n *\n * or:\n *\n * ```typescript\n * {provide: PRECONNECT_CHECK_BLOCKLIST,\n * useValue: ['https://your-domain-1.com', 'https://your-domain-2.com']}\n * ```\n *\n * @publicApi\n */\nconst PRECONNECT_CHECK_BLOCKLIST = new InjectionToken('PRECONNECT_CHECK_BLOCKLIST');\n/**\n * Contains the logic to detect whether an image, marked with the \"priority\" attribute\n * has a corresponding `` tag in the `document.head`.\n *\n * Note: this is a dev-mode only class, which should not appear in prod bundles,\n * thus there is no `ngDevMode` use in the code.\n */\nclass PreconnectLinkChecker {\n constructor() {\n this.document = inject(DOCUMENT);\n /**\n * Set of tags found on this page.\n * The `null` value indicates that there was no DOM query operation performed.\n */\n this.preconnectLinks = null;\n /*\n * Keep track of all already seen origin URLs to avoid repeating the same check.\n */\n this.alreadySeen = new Set();\n this.window = null;\n this.blocklist = new Set(INTERNAL_PRECONNECT_CHECK_BLOCKLIST);\n assertDevMode('preconnect link checker');\n const win = this.document.defaultView;\n if (typeof win !== 'undefined') {\n this.window = win;\n }\n const blocklist = inject(PRECONNECT_CHECK_BLOCKLIST, { optional: true });\n if (blocklist) {\n this.populateBlocklist(blocklist);\n }\n }\n populateBlocklist(origins) {\n if (Array.isArray(origins)) {\n deepForEach(origins, origin => {\n this.blocklist.add(extractHostname(origin));\n });\n }\n else {\n this.blocklist.add(extractHostname(origins));\n }\n }\n /**\n * Checks that a preconnect resource hint exists in the head for the\n * given src.\n *\n * @param rewrittenSrc src formatted with loader\n * @param originalNgSrc ngSrc value\n */\n assertPreconnect(rewrittenSrc, originalNgSrc) {\n if (!this.window)\n return;\n const imgUrl = getUrl(rewrittenSrc, this.window);\n if (this.blocklist.has(imgUrl.hostname) || this.alreadySeen.has(imgUrl.origin))\n return;\n // Register this origin as seen, so we don't check it again later.\n this.alreadySeen.add(imgUrl.origin);\n if (!this.preconnectLinks) {\n // Note: we query for preconnect links only *once* and cache the results\n // for the entire lifespan of an application, since it's unlikely that the\n // list would change frequently. This allows to make sure there are no\n // performance implications of making extra DOM lookups for each image.\n this.preconnectLinks = this.queryPreconnectLinks();\n }\n if (!this.preconnectLinks.has(imgUrl.origin)) {\n console.warn(ɵformatRuntimeError(2956 /* RuntimeErrorCode.PRIORITY_IMG_MISSING_PRECONNECT_TAG */, `${imgDirectiveDetails(originalNgSrc)} there is no preconnect tag present for this ` +\n `image. Preconnecting to the origin(s) that serve priority images ensures that these ` +\n `images are delivered as soon as possible. To fix this, please add the following ` +\n `element into the of the document:\\n` +\n ` `));\n }\n }\n queryPreconnectLinks() {\n const preconnectUrls = new Set();\n const selector = 'link[rel=preconnect]';\n const links = Array.from(this.document.querySelectorAll(selector));\n for (let link of links) {\n const url = getUrl(link.href, this.window);\n preconnectUrls.add(url.origin);\n }\n return preconnectUrls;\n }\n ngOnDestroy() {\n this.preconnectLinks?.clear();\n this.alreadySeen.clear();\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PreconnectLinkChecker, deps: [], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PreconnectLinkChecker, providedIn: 'root' }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PreconnectLinkChecker, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root' }]\n }], ctorParameters: function () { return []; } });\n/**\n * Invokes a callback for each element in the array. Also invokes a callback\n * recursively for each nested array.\n */\nfunction deepForEach(input, fn) {\n for (let value of input) {\n Array.isArray(value) ? deepForEach(value, fn) : fn(value);\n }\n}\n\n/**\n * In SSR scenarios, a preload `` element is generated for priority images.\n * Having a large number of preload tags may negatively affect the performance,\n * so we warn developers (by throwing an error) if the number of preloaded images\n * is above a certain threshold. This const specifies this threshold.\n */\nconst DEFAULT_PRELOADED_IMAGES_LIMIT = 5;\n/**\n * Helps to keep track of priority images that already have a corresponding\n * preload tag (to avoid generating multiple preload tags with the same URL).\n *\n * This Set tracks the original src passed into the `ngSrc` input not the src after it has been\n * run through the specified `IMAGE_LOADER`.\n */\nconst PRELOADED_IMAGES = new InjectionToken('NG_OPTIMIZED_PRELOADED_IMAGES', { providedIn: 'root', factory: () => new Set() });\n\n/**\n * @description Contains the logic needed to track and add preload link tags to the `` tag. It\n * will also track what images have already had preload link tags added so as to not duplicate link\n * tags.\n *\n * In dev mode this service will validate that the number of preloaded images does not exceed the\n * configured default preloaded images limit: {@link DEFAULT_PRELOADED_IMAGES_LIMIT}.\n */\nclass PreloadLinkCreator {\n constructor() {\n this.preloadedImages = inject(PRELOADED_IMAGES);\n this.document = inject(DOCUMENT);\n }\n /**\n * @description Add a preload `` to the `` of the `index.html` that is served from the\n * server while using Angular Universal and SSR to kick off image loads for high priority images.\n *\n * The `sizes` (passed in from the user) and `srcset` (parsed and formatted from `ngSrcset`)\n * properties used to set the corresponding attributes, `imagesizes` and `imagesrcset`\n * respectively, on the preload `` tag so that the correctly sized image is preloaded from\n * the CDN.\n *\n * {@link https://web.dev/preload-responsive-images/#imagesrcset-and-imagesizes}\n *\n * @param renderer The `Renderer2` passed in from the directive\n * @param src The original src of the image that is set on the `ngSrc` input.\n * @param srcset The parsed and formatted srcset created from the `ngSrcset` input\n * @param sizes The value of the `sizes` attribute passed in to the `![]()
` tag\n */\n createPreloadLinkTag(renderer, src, srcset, sizes) {\n if (ngDevMode) {\n if (this.preloadedImages.size >= DEFAULT_PRELOADED_IMAGES_LIMIT) {\n throw new ɵRuntimeError(2961 /* RuntimeErrorCode.TOO_MANY_PRELOADED_IMAGES */, ngDevMode &&\n `The \\`NgOptimizedImage\\` directive has detected that more than ` +\n `${DEFAULT_PRELOADED_IMAGES_LIMIT} images were marked as priority. ` +\n `This might negatively affect an overall performance of the page. ` +\n `To fix this, remove the \"priority\" attribute from images with less priority.`);\n }\n }\n if (this.preloadedImages.has(src)) {\n return;\n }\n this.preloadedImages.add(src);\n const preload = renderer.createElement('link');\n renderer.setAttribute(preload, 'as', 'image');\n renderer.setAttribute(preload, 'href', src);\n renderer.setAttribute(preload, 'rel', 'preload');\n renderer.setAttribute(preload, 'fetchpriority', 'high');\n if (sizes) {\n renderer.setAttribute(preload, 'imageSizes', sizes);\n }\n if (srcset) {\n renderer.setAttribute(preload, 'imageSrcset', srcset);\n }\n renderer.appendChild(this.document.head, preload);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PreloadLinkCreator, deps: [], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PreloadLinkCreator, providedIn: 'root' }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: PreloadLinkCreator, decorators: [{\n type: Injectable,\n args: [{ providedIn: 'root' }]\n }] });\n\n/**\n * When a Base64-encoded image is passed as an input to the `NgOptimizedImage` directive,\n * an error is thrown. The image content (as a string) might be very long, thus making\n * it hard to read an error message if the entire string is included. This const defines\n * the number of characters that should be included into the error message. The rest\n * of the content is truncated.\n */\nconst BASE64_IMG_MAX_LENGTH_IN_ERROR = 50;\n/**\n * RegExpr to determine whether a src in a srcset is using width descriptors.\n * Should match something like: \"100w, 200w\".\n */\nconst VALID_WIDTH_DESCRIPTOR_SRCSET = /^((\\s*\\d+w\\s*(,|$)){1,})$/;\n/**\n * RegExpr to determine whether a src in a srcset is using density descriptors.\n * Should match something like: \"1x, 2x, 50x\". Also supports decimals like \"1.5x, 1.50x\".\n */\nconst VALID_DENSITY_DESCRIPTOR_SRCSET = /^((\\s*\\d+(\\.\\d+)?x\\s*(,|$)){1,})$/;\n/**\n * Srcset values with a density descriptor higher than this value will actively\n * throw an error. Such densities are not permitted as they cause image sizes\n * to be unreasonably large and slow down LCP.\n */\nconst ABSOLUTE_SRCSET_DENSITY_CAP = 3;\n/**\n * Used only in error message text to communicate best practices, as we will\n * only throw based on the slightly more conservative ABSOLUTE_SRCSET_DENSITY_CAP.\n */\nconst RECOMMENDED_SRCSET_DENSITY_CAP = 2;\n/**\n * Used in generating automatic density-based srcsets\n */\nconst DENSITY_SRCSET_MULTIPLIERS = [1, 2];\n/**\n * Used to determine which breakpoints to use on full-width images\n */\nconst VIEWPORT_BREAKPOINT_CUTOFF = 640;\n/**\n * Used to determine whether two aspect ratios are similar in value.\n */\nconst ASPECT_RATIO_TOLERANCE = .1;\n/**\n * Used to determine whether the image has been requested at an overly\n * large size compared to the actual rendered image size (after taking\n * into account a typical device pixel ratio). In pixels.\n */\nconst OVERSIZED_IMAGE_TOLERANCE = 1000;\n/**\n * Used to limit automatic srcset generation of very large sources for\n * fixed-size images. In pixels.\n */\nconst FIXED_SRCSET_WIDTH_LIMIT = 1920;\nconst FIXED_SRCSET_HEIGHT_LIMIT = 1080;\n/** Info about built-in loaders we can test for. */\nconst BUILT_IN_LOADERS = [imgixLoaderInfo, imageKitLoaderInfo, cloudinaryLoaderInfo];\nconst defaultConfig = {\n breakpoints: [16, 32, 48, 64, 96, 128, 256, 384, 640, 750, 828, 1080, 1200, 1920, 2048, 3840],\n};\n/**\n * Injection token that configures the image optimized image functionality.\n *\n * @see `NgOptimizedImage`\n * @publicApi\n * @developerPreview\n */\nconst IMAGE_CONFIG = new InjectionToken('ImageConfig', { providedIn: 'root', factory: () => defaultConfig });\n/**\n * Directive that improves image loading performance by enforcing best practices.\n *\n * `NgOptimizedImage` ensures that the loading of the Largest Contentful Paint (LCP) image is\n * prioritized by:\n * - Automatically setting the `fetchpriority` attribute on the `![]()
` tag\n * - Lazy loading non-priority images by default\n * - Asserting that there is a corresponding preconnect link tag in the document head\n *\n * In addition, the directive:\n * - Generates appropriate asset URLs if a corresponding `ImageLoader` function is provided\n * - Automatically generates a srcset\n * - Requires that `width` and `height` are set\n * - Warns if `width` or `height` have been set incorrectly\n * - Warns if the image will be visually distorted when rendered\n *\n * @usageNotes\n * The `NgOptimizedImage` directive is marked as [standalone](guide/standalone-components) and can\n * be imported directly.\n *\n * Follow the steps below to enable and use the directive:\n * 1. Import it into the necessary NgModule or a standalone Component.\n * 2. Optionally provide an `ImageLoader` if you use an image hosting service.\n * 3. Update the necessary `![]()
` tags in templates and replace `src` attributes with `ngSrc`.\n * Using a `ngSrc` allows the directive to control when the `src` gets set, which triggers an image\n * download.\n *\n * Step 1: import the `NgOptimizedImage` directive.\n *\n * ```typescript\n * import { NgOptimizedImage } from '@angular/common';\n *\n * // Include it into the necessary NgModule\n * @NgModule({\n * imports: [NgOptimizedImage],\n * })\n * class AppModule {}\n *\n * // ... or a standalone Component\n * @Component({\n * standalone: true\n * imports: [NgOptimizedImage],\n * })\n * class MyStandaloneComponent {}\n * ```\n *\n * Step 2: configure a loader.\n *\n * To use the **default loader**: no additional code changes are necessary. The URL returned by the\n * generic loader will always match the value of \"src\". In other words, this loader applies no\n * transformations to the resource URL and the value of the `ngSrc` attribute will be used as is.\n *\n * To use an existing loader for a **third-party image service**: add the provider factory for your\n * chosen service to the `providers` array. In the example below, the Imgix loader is used:\n *\n * ```typescript\n * import {provideImgixLoader} from '@angular/common';\n *\n * // Call the function and add the result to the `providers` array:\n * providers: [\n * provideImgixLoader(\"https://my.base.url/\"),\n * ],\n * ```\n *\n * The `NgOptimizedImage` directive provides the following functions:\n * - `provideCloudflareLoader`\n * - `provideCloudinaryLoader`\n * - `provideImageKitLoader`\n * - `provideImgixLoader`\n *\n * If you use a different image provider, you can create a custom loader function as described\n * below.\n *\n * To use a **custom loader**: provide your loader function as a value for the `IMAGE_LOADER` DI\n * token.\n *\n * ```typescript\n * import {IMAGE_LOADER, ImageLoaderConfig} from '@angular/common';\n *\n * // Configure the loader using the `IMAGE_LOADER` token.\n * providers: [\n * {\n * provide: IMAGE_LOADER,\n * useValue: (config: ImageLoaderConfig) => {\n * return `https://example.com/${config.src}-${config.width}.jpg}`;\n * }\n * },\n * ],\n * ```\n *\n * Step 3: update `![]()
` tags in templates to use `ngSrc` instead of `src`.\n *\n * ```\n * ![]()
\n * ```\n *\n * @publicApi\n */\nclass NgOptimizedImage {\n constructor() {\n this.imageLoader = inject(IMAGE_LOADER);\n this.config = processConfig(inject(IMAGE_CONFIG));\n this.renderer = inject(Renderer2);\n this.imgElement = inject(ElementRef).nativeElement;\n this.injector = inject(Injector);\n this.isServer = isPlatformServer(inject(PLATFORM_ID));\n this.preloadLinkChecker = inject(PreloadLinkCreator);\n // a LCP image observer - should be injected only in the dev mode\n this.lcpObserver = ngDevMode ? this.injector.get(LCPImageObserver) : null;\n /**\n * Calculate the rewritten `src` once and store it.\n * This is needed to avoid repetitive calculations and make sure the directive cleanup in the\n * `ngOnDestroy` does not rely on the `IMAGE_LOADER` logic (which in turn can rely on some other\n * instance that might be already destroyed).\n */\n this._renderedSrc = null;\n this._priority = false;\n this._disableOptimizedSrcset = false;\n this._fill = false;\n }\n /**\n * For responsive images: the intrinsic width of the image in pixels.\n * For fixed size images: the desired rendered width of the image in pixels.\n */\n set width(value) {\n ngDevMode && assertGreaterThanZero(this, value, 'width');\n this._width = inputToInteger(value);\n }\n get width() {\n return this._width;\n }\n /**\n * For responsive images: the intrinsic height of the image in pixels.\n * For fixed size images: the desired rendered height of the image in pixels.* The intrinsic\n * height of the image in pixels.\n */\n set height(value) {\n ngDevMode && assertGreaterThanZero(this, value, 'height');\n this._height = inputToInteger(value);\n }\n get height() {\n return this._height;\n }\n /**\n * Indicates whether this image should have a high priority.\n */\n set priority(value) {\n this._priority = inputToBoolean(value);\n }\n get priority() {\n return this._priority;\n }\n /**\n * Disables automatic srcset generation for this image.\n */\n set disableOptimizedSrcset(value) {\n this._disableOptimizedSrcset = inputToBoolean(value);\n }\n get disableOptimizedSrcset() {\n return this._disableOptimizedSrcset;\n }\n /**\n * Sets the image to \"fill mode\", which eliminates the height/width requirement and adds\n * styles such that the image fills its containing element.\n *\n * @developerPreview\n */\n set fill(value) {\n this._fill = inputToBoolean(value);\n }\n get fill() {\n return this._fill;\n }\n /** @nodoc */\n ngOnInit() {\n if (ngDevMode) {\n assertNonEmptyInput(this, 'ngSrc', this.ngSrc);\n assertValidNgSrcset(this, this.ngSrcset);\n assertNoConflictingSrc(this);\n if (this.ngSrcset) {\n assertNoConflictingSrcset(this);\n }\n assertNotBase64Image(this);\n assertNotBlobUrl(this);\n if (this.fill) {\n assertEmptyWidthAndHeight(this);\n assertNonZeroRenderedHeight(this, this.imgElement, this.renderer);\n }\n else {\n assertNonEmptyWidthAndHeight(this);\n // Only check for distorted images when not in fill mode, where\n // images may be intentionally stretched, cropped or letterboxed.\n assertNoImageDistortion(this, this.imgElement, this.renderer);\n }\n assertValidLoadingInput(this);\n if (!this.ngSrcset) {\n assertNoComplexSizes(this);\n }\n assertNotMissingBuiltInLoader(this.ngSrc, this.imageLoader);\n assertNoNgSrcsetWithoutLoader(this, this.imageLoader);\n assertNoLoaderParamsWithoutLoader(this, this.imageLoader);\n if (this.priority) {\n const checker = this.injector.get(PreconnectLinkChecker);\n checker.assertPreconnect(this.getRewrittenSrc(), this.ngSrc);\n }\n else {\n // Monitor whether an image is an LCP element only in case\n // the `priority` attribute is missing. Otherwise, an image\n // has the necessary settings and no extra checks are required.\n if (this.lcpObserver !== null) {\n const ngZone = this.injector.get(NgZone);\n ngZone.runOutsideAngular(() => {\n this.lcpObserver.registerImage(this.getRewrittenSrc(), this.ngSrc);\n });\n }\n }\n }\n this.setHostAttributes();\n }\n setHostAttributes() {\n // Must set width/height explicitly in case they are bound (in which case they will\n // only be reflected and not found by the browser)\n if (this.fill) {\n if (!this.sizes) {\n this.sizes = '100vw';\n }\n }\n else {\n this.setHostAttribute('width', this.width.toString());\n this.setHostAttribute('height', this.height.toString());\n }\n this.setHostAttribute('loading', this.getLoadingBehavior());\n this.setHostAttribute('fetchpriority', this.getFetchPriority());\n // The `data-ng-img` attribute flags an image as using the directive, to allow\n // for analysis of the directive's performance.\n this.setHostAttribute('ng-img', 'true');\n // The `src` and `srcset` attributes should be set last since other attributes\n // could affect the image's loading behavior.\n const rewrittenSrc = this.getRewrittenSrc();\n this.setHostAttribute('src', rewrittenSrc);\n let rewrittenSrcset = undefined;\n if (this.sizes) {\n this.setHostAttribute('sizes', this.sizes);\n }\n if (this.ngSrcset) {\n rewrittenSrcset = this.getRewrittenSrcset();\n }\n else if (this.shouldGenerateAutomaticSrcset()) {\n rewrittenSrcset = this.getAutomaticSrcset();\n }\n if (rewrittenSrcset) {\n this.setHostAttribute('srcset', rewrittenSrcset);\n }\n if (this.isServer && this.priority) {\n this.preloadLinkChecker.createPreloadLinkTag(this.renderer, rewrittenSrc, rewrittenSrcset, this.sizes);\n }\n }\n /** @nodoc */\n ngOnChanges(changes) {\n if (ngDevMode) {\n assertNoPostInitInputChange(this, changes, [\n 'ngSrc',\n 'ngSrcset',\n 'width',\n 'height',\n 'priority',\n 'fill',\n 'loading',\n 'sizes',\n 'loaderParams',\n 'disableOptimizedSrcset',\n ]);\n }\n }\n callImageLoader(configWithoutCustomParams) {\n let augmentedConfig = configWithoutCustomParams;\n if (this.loaderParams) {\n augmentedConfig.loaderParams = this.loaderParams;\n }\n return this.imageLoader(augmentedConfig);\n }\n getLoadingBehavior() {\n if (!this.priority && this.loading !== undefined) {\n return this.loading;\n }\n return this.priority ? 'eager' : 'lazy';\n }\n getFetchPriority() {\n return this.priority ? 'high' : 'auto';\n }\n getRewrittenSrc() {\n // ImageLoaderConfig supports setting a width property. However, we're not setting width here\n // because if the developer uses rendered width instead of intrinsic width in the HTML width\n // attribute, the image requested may be too small for 2x+ screens.\n if (!this._renderedSrc) {\n const imgConfig = { src: this.ngSrc };\n // Cache calculated image src to reuse it later in the code.\n this._renderedSrc = this.callImageLoader(imgConfig);\n }\n return this._renderedSrc;\n }\n getRewrittenSrcset() {\n const widthSrcSet = VALID_WIDTH_DESCRIPTOR_SRCSET.test(this.ngSrcset);\n const finalSrcs = this.ngSrcset.split(',').filter(src => src !== '').map(srcStr => {\n srcStr = srcStr.trim();\n const width = widthSrcSet ? parseFloat(srcStr) : parseFloat(srcStr) * this.width;\n return `${this.callImageLoader({ src: this.ngSrc, width })} ${srcStr}`;\n });\n return finalSrcs.join(', ');\n }\n getAutomaticSrcset() {\n if (this.sizes) {\n return this.getResponsiveSrcset();\n }\n else {\n return this.getFixedSrcset();\n }\n }\n getResponsiveSrcset() {\n const { breakpoints } = this.config;\n let filteredBreakpoints = breakpoints;\n if (this.sizes?.trim() === '100vw') {\n // Since this is a full-screen-width image, our srcset only needs to include\n // breakpoints with full viewport widths.\n filteredBreakpoints = breakpoints.filter(bp => bp >= VIEWPORT_BREAKPOINT_CUTOFF);\n }\n const finalSrcs = filteredBreakpoints.map(bp => `${this.callImageLoader({ src: this.ngSrc, width: bp })} ${bp}w`);\n return finalSrcs.join(', ');\n }\n getFixedSrcset() {\n const finalSrcs = DENSITY_SRCSET_MULTIPLIERS.map(multiplier => `${this.callImageLoader({\n src: this.ngSrc,\n width: this.width * multiplier\n })} ${multiplier}x`);\n return finalSrcs.join(', ');\n }\n shouldGenerateAutomaticSrcset() {\n return !this._disableOptimizedSrcset && !this.srcset && this.imageLoader !== noopImageLoader &&\n !(this.width > FIXED_SRCSET_WIDTH_LIMIT || this.height > FIXED_SRCSET_HEIGHT_LIMIT);\n }\n /** @nodoc */\n ngOnDestroy() {\n if (ngDevMode) {\n if (!this.priority && this._renderedSrc !== null && this.lcpObserver !== null) {\n this.lcpObserver.unregisterImage(this._renderedSrc);\n }\n }\n }\n setHostAttribute(name, value) {\n this.renderer.setAttribute(this.imgElement, name, value);\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgOptimizedImage, deps: [], target: i0.ɵɵFactoryTarget.Directive }); }\n static { this.ɵdir = i0.ɵɵngDeclareDirective({ minVersion: \"14.0.0\", version: \"16.0.1\", type: NgOptimizedImage, isStandalone: true, selector: \"img[ngSrc]\", inputs: { ngSrc: \"ngSrc\", ngSrcset: \"ngSrcset\", sizes: \"sizes\", width: \"width\", height: \"height\", loading: \"loading\", priority: \"priority\", loaderParams: \"loaderParams\", disableOptimizedSrcset: \"disableOptimizedSrcset\", fill: \"fill\", src: \"src\", srcset: \"srcset\" }, host: { properties: { \"style.position\": \"fill ? \\\"absolute\\\" : null\", \"style.width\": \"fill ? \\\"100%\\\" : null\", \"style.height\": \"fill ? \\\"100%\\\" : null\", \"style.inset\": \"fill ? \\\"0px\\\" : null\" } }, usesOnChanges: true, ngImport: i0 }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: NgOptimizedImage, decorators: [{\n type: Directive,\n args: [{\n standalone: true,\n selector: 'img[ngSrc]',\n host: {\n '[style.position]': 'fill ? \"absolute\" : null',\n '[style.width]': 'fill ? \"100%\" : null',\n '[style.height]': 'fill ? \"100%\" : null',\n '[style.inset]': 'fill ? \"0px\" : null'\n }\n }]\n }], propDecorators: { ngSrc: [{\n type: Input\n }], ngSrcset: [{\n type: Input\n }], sizes: [{\n type: Input\n }], width: [{\n type: Input\n }], height: [{\n type: Input\n }], loading: [{\n type: Input\n }], priority: [{\n type: Input\n }], loaderParams: [{\n type: Input\n }], disableOptimizedSrcset: [{\n type: Input\n }], fill: [{\n type: Input\n }], src: [{\n type: Input\n }], srcset: [{\n type: Input\n }] } });\n/***** Helpers *****/\n/**\n * Convert input value to integer.\n */\nfunction inputToInteger(value) {\n return typeof value === 'string' ? parseInt(value, 10) : value;\n}\n/**\n * Convert input value to boolean.\n */\nfunction inputToBoolean(value) {\n return value != null && `${value}` !== 'false';\n}\n/**\n * Sorts provided config breakpoints and uses defaults.\n */\nfunction processConfig(config) {\n let sortedBreakpoints = {};\n if (config.breakpoints) {\n sortedBreakpoints.breakpoints = config.breakpoints.sort((a, b) => a - b);\n }\n return Object.assign({}, defaultConfig, config, sortedBreakpoints);\n}\n/***** Assert functions *****/\n/**\n * Verifies that there is no `src` set on a host element.\n */\nfunction assertNoConflictingSrc(dir) {\n if (dir.src) {\n throw new ɵRuntimeError(2950 /* RuntimeErrorCode.UNEXPECTED_SRC_ATTR */, `${imgDirectiveDetails(dir.ngSrc)} both \\`src\\` and \\`ngSrc\\` have been set. ` +\n `Supplying both of these attributes breaks lazy loading. ` +\n `The NgOptimizedImage directive sets \\`src\\` itself based on the value of \\`ngSrc\\`. ` +\n `To fix this, please remove the \\`src\\` attribute.`);\n }\n}\n/**\n * Verifies that there is no `srcset` set on a host element.\n */\nfunction assertNoConflictingSrcset(dir) {\n if (dir.srcset) {\n throw new ɵRuntimeError(2951 /* RuntimeErrorCode.UNEXPECTED_SRCSET_ATTR */, `${imgDirectiveDetails(dir.ngSrc)} both \\`srcset\\` and \\`ngSrcset\\` have been set. ` +\n `Supplying both of these attributes breaks lazy loading. ` +\n `The NgOptimizedImage directive sets \\`srcset\\` itself based on the value of ` +\n `\\`ngSrcset\\`. To fix this, please remove the \\`srcset\\` attribute.`);\n }\n}\n/**\n * Verifies that the `ngSrc` is not a Base64-encoded image.\n */\nfunction assertNotBase64Image(dir) {\n let ngSrc = dir.ngSrc.trim();\n if (ngSrc.startsWith('data:')) {\n if (ngSrc.length > BASE64_IMG_MAX_LENGTH_IN_ERROR) {\n ngSrc = ngSrc.substring(0, BASE64_IMG_MAX_LENGTH_IN_ERROR) + '...';\n }\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc, false)} \\`ngSrc\\` is a Base64-encoded string ` +\n `(${ngSrc}). NgOptimizedImage does not support Base64-encoded strings. ` +\n `To fix this, disable the NgOptimizedImage directive for this element ` +\n `by removing \\`ngSrc\\` and using a standard \\`src\\` attribute instead.`);\n }\n}\n/**\n * Verifies that the 'sizes' only includes responsive values.\n */\nfunction assertNoComplexSizes(dir) {\n let sizes = dir.sizes;\n if (sizes?.match(/((\\)|,)\\s|^)\\d+px/)) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc, false)} \\`sizes\\` was set to a string including ` +\n `pixel values. For automatic \\`srcset\\` generation, \\`sizes\\` must only include responsive ` +\n `values, such as \\`sizes=\"50vw\"\\` or \\`sizes=\"(min-width: 768px) 50vw, 100vw\"\\`. ` +\n `To fix this, modify the \\`sizes\\` attribute, or provide your own \\`ngSrcset\\` value directly.`);\n }\n}\n/**\n * Verifies that the `ngSrc` is not a Blob URL.\n */\nfunction assertNotBlobUrl(dir) {\n const ngSrc = dir.ngSrc.trim();\n if (ngSrc.startsWith('blob:')) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} \\`ngSrc\\` was set to a blob URL (${ngSrc}). ` +\n `Blob URLs are not supported by the NgOptimizedImage directive. ` +\n `To fix this, disable the NgOptimizedImage directive for this element ` +\n `by removing \\`ngSrc\\` and using a regular \\`src\\` attribute instead.`);\n }\n}\n/**\n * Verifies that the input is set to a non-empty string.\n */\nfunction assertNonEmptyInput(dir, name, value) {\n const isString = typeof value === 'string';\n const isEmptyString = isString && value.trim() === '';\n if (!isString || isEmptyString) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} \\`${name}\\` has an invalid value ` +\n `(\\`${value}\\`). To fix this, change the value to a non-empty string.`);\n }\n}\n/**\n * Verifies that the `ngSrcset` is in a valid format, e.g. \"100w, 200w\" or \"1x, 2x\".\n */\nfunction assertValidNgSrcset(dir, value) {\n if (value == null)\n return;\n assertNonEmptyInput(dir, 'ngSrcset', value);\n const stringVal = value;\n const isValidWidthDescriptor = VALID_WIDTH_DESCRIPTOR_SRCSET.test(stringVal);\n const isValidDensityDescriptor = VALID_DENSITY_DESCRIPTOR_SRCSET.test(stringVal);\n if (isValidDensityDescriptor) {\n assertUnderDensityCap(dir, stringVal);\n }\n const isValidSrcset = isValidWidthDescriptor || isValidDensityDescriptor;\n if (!isValidSrcset) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} \\`ngSrcset\\` has an invalid value (\\`${value}\\`). ` +\n `To fix this, supply \\`ngSrcset\\` using a comma-separated list of one or more width ` +\n `descriptors (e.g. \"100w, 200w\") or density descriptors (e.g. \"1x, 2x\").`);\n }\n}\nfunction assertUnderDensityCap(dir, value) {\n const underDensityCap = value.split(',').every(num => num === '' || parseFloat(num) <= ABSOLUTE_SRCSET_DENSITY_CAP);\n if (!underDensityCap) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} the \\`ngSrcset\\` contains an unsupported image density:` +\n `\\`${value}\\`. NgOptimizedImage generally recommends a max image density of ` +\n `${RECOMMENDED_SRCSET_DENSITY_CAP}x but supports image densities up to ` +\n `${ABSOLUTE_SRCSET_DENSITY_CAP}x. The human eye cannot distinguish between image densities ` +\n `greater than ${RECOMMENDED_SRCSET_DENSITY_CAP}x - which makes them unnecessary for ` +\n `most use cases. Images that will be pinch-zoomed are typically the primary use case for ` +\n `${ABSOLUTE_SRCSET_DENSITY_CAP}x images. Please remove the high density descriptor and try again.`);\n }\n}\n/**\n * Creates a `RuntimeError` instance to represent a situation when an input is set after\n * the directive has initialized.\n */\nfunction postInitInputChangeError(dir, inputName) {\n let reason;\n if (inputName === 'width' || inputName === 'height') {\n reason = `Changing \\`${inputName}\\` may result in different attribute value ` +\n `applied to the underlying image element and cause layout shifts on a page.`;\n }\n else {\n reason = `Changing the \\`${inputName}\\` would have no effect on the underlying ` +\n `image element, because the resource loading has already occurred.`;\n }\n return new ɵRuntimeError(2953 /* RuntimeErrorCode.UNEXPECTED_INPUT_CHANGE */, `${imgDirectiveDetails(dir.ngSrc)} \\`${inputName}\\` was updated after initialization. ` +\n `The NgOptimizedImage directive will not react to this input change. ${reason} ` +\n `To fix this, either switch \\`${inputName}\\` to a static value ` +\n `or wrap the image element in an *ngIf that is gated on the necessary value.`);\n}\n/**\n * Verify that none of the listed inputs has changed.\n */\nfunction assertNoPostInitInputChange(dir, changes, inputs) {\n inputs.forEach(input => {\n const isUpdated = changes.hasOwnProperty(input);\n if (isUpdated && !changes[input].isFirstChange()) {\n if (input === 'ngSrc') {\n // When the `ngSrc` input changes, we detect that only in the\n // `ngOnChanges` hook, thus the `ngSrc` is already set. We use\n // `ngSrc` in the error message, so we use a previous value, but\n // not the updated one in it.\n dir = { ngSrc: changes[input].previousValue };\n }\n throw postInitInputChangeError(dir, input);\n }\n });\n}\n/**\n * Verifies that a specified input is a number greater than 0.\n */\nfunction assertGreaterThanZero(dir, inputValue, inputName) {\n const validNumber = typeof inputValue === 'number' && inputValue > 0;\n const validString = typeof inputValue === 'string' && /^\\d+$/.test(inputValue.trim()) && parseInt(inputValue) > 0;\n if (!validNumber && !validString) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} \\`${inputName}\\` has an invalid value ` +\n `(\\`${inputValue}\\`). To fix this, provide \\`${inputName}\\` ` +\n `as a number greater than 0.`);\n }\n}\n/**\n * Verifies that the rendered image is not visually distorted. Effectively this is checking:\n * - Whether the \"width\" and \"height\" attributes reflect the actual dimensions of the image.\n * - Whether image styling is \"correct\" (see below for a longer explanation).\n */\nfunction assertNoImageDistortion(dir, img, renderer) {\n const removeListenerFn = renderer.listen(img, 'load', () => {\n removeListenerFn();\n const computedStyle = window.getComputedStyle(img);\n let renderedWidth = parseFloat(computedStyle.getPropertyValue('width'));\n let renderedHeight = parseFloat(computedStyle.getPropertyValue('height'));\n const boxSizing = computedStyle.getPropertyValue('box-sizing');\n if (boxSizing === 'border-box') {\n const paddingTop = computedStyle.getPropertyValue('padding-top');\n const paddingRight = computedStyle.getPropertyValue('padding-right');\n const paddingBottom = computedStyle.getPropertyValue('padding-bottom');\n const paddingLeft = computedStyle.getPropertyValue('padding-left');\n renderedWidth -= parseFloat(paddingRight) + parseFloat(paddingLeft);\n renderedHeight -= parseFloat(paddingTop) + parseFloat(paddingBottom);\n }\n const renderedAspectRatio = renderedWidth / renderedHeight;\n const nonZeroRenderedDimensions = renderedWidth !== 0 && renderedHeight !== 0;\n const intrinsicWidth = img.naturalWidth;\n const intrinsicHeight = img.naturalHeight;\n const intrinsicAspectRatio = intrinsicWidth / intrinsicHeight;\n const suppliedWidth = dir.width;\n const suppliedHeight = dir.height;\n const suppliedAspectRatio = suppliedWidth / suppliedHeight;\n // Tolerance is used to account for the impact of subpixel rendering.\n // Due to subpixel rendering, the rendered, intrinsic, and supplied\n // aspect ratios of a correctly configured image may not exactly match.\n // For example, a `width=4030 height=3020` image might have a rendered\n // size of \"1062w, 796.48h\". (An aspect ratio of 1.334... vs. 1.333...)\n const inaccurateDimensions = Math.abs(suppliedAspectRatio - intrinsicAspectRatio) > ASPECT_RATIO_TOLERANCE;\n const stylingDistortion = nonZeroRenderedDimensions &&\n Math.abs(intrinsicAspectRatio - renderedAspectRatio) > ASPECT_RATIO_TOLERANCE;\n if (inaccurateDimensions) {\n console.warn(ɵformatRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} the aspect ratio of the image does not match ` +\n `the aspect ratio indicated by the width and height attributes. ` +\n `\\nIntrinsic image size: ${intrinsicWidth}w x ${intrinsicHeight}h ` +\n `(aspect-ratio: ${intrinsicAspectRatio}). \\nSupplied width and height attributes: ` +\n `${suppliedWidth}w x ${suppliedHeight}h (aspect-ratio: ${suppliedAspectRatio}). ` +\n `\\nTo fix this, update the width and height attributes.`));\n }\n else if (stylingDistortion) {\n console.warn(ɵformatRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} the aspect ratio of the rendered image ` +\n `does not match the image's intrinsic aspect ratio. ` +\n `\\nIntrinsic image size: ${intrinsicWidth}w x ${intrinsicHeight}h ` +\n `(aspect-ratio: ${intrinsicAspectRatio}). \\nRendered image size: ` +\n `${renderedWidth}w x ${renderedHeight}h (aspect-ratio: ` +\n `${renderedAspectRatio}). \\nThis issue can occur if \"width\" and \"height\" ` +\n `attributes are added to an image without updating the corresponding ` +\n `image styling. To fix this, adjust image styling. In most cases, ` +\n `adding \"height: auto\" or \"width: auto\" to the image styling will fix ` +\n `this issue.`));\n }\n else if (!dir.ngSrcset && nonZeroRenderedDimensions) {\n // If `ngSrcset` hasn't been set, sanity check the intrinsic size.\n const recommendedWidth = RECOMMENDED_SRCSET_DENSITY_CAP * renderedWidth;\n const recommendedHeight = RECOMMENDED_SRCSET_DENSITY_CAP * renderedHeight;\n const oversizedWidth = (intrinsicWidth - recommendedWidth) >= OVERSIZED_IMAGE_TOLERANCE;\n const oversizedHeight = (intrinsicHeight - recommendedHeight) >= OVERSIZED_IMAGE_TOLERANCE;\n if (oversizedWidth || oversizedHeight) {\n console.warn(ɵformatRuntimeError(2960 /* RuntimeErrorCode.OVERSIZED_IMAGE */, `${imgDirectiveDetails(dir.ngSrc)} the intrinsic image is significantly ` +\n `larger than necessary. ` +\n `\\nRendered image size: ${renderedWidth}w x ${renderedHeight}h. ` +\n `\\nIntrinsic image size: ${intrinsicWidth}w x ${intrinsicHeight}h. ` +\n `\\nRecommended intrinsic image size: ${recommendedWidth}w x ${recommendedHeight}h. ` +\n `\\nNote: Recommended intrinsic image size is calculated assuming a maximum DPR of ` +\n `${RECOMMENDED_SRCSET_DENSITY_CAP}. To improve loading time, resize the image ` +\n `or consider using the \"ngSrcset\" and \"sizes\" attributes.`));\n }\n }\n });\n}\n/**\n * Verifies that a specified input is set.\n */\nfunction assertNonEmptyWidthAndHeight(dir) {\n let missingAttributes = [];\n if (dir.width === undefined)\n missingAttributes.push('width');\n if (dir.height === undefined)\n missingAttributes.push('height');\n if (missingAttributes.length > 0) {\n throw new ɵRuntimeError(2954 /* RuntimeErrorCode.REQUIRED_INPUT_MISSING */, `${imgDirectiveDetails(dir.ngSrc)} these required attributes ` +\n `are missing: ${missingAttributes.map(attr => `\"${attr}\"`).join(', ')}. ` +\n `Including \"width\" and \"height\" attributes will prevent image-related layout shifts. ` +\n `To fix this, include \"width\" and \"height\" attributes on the image tag or turn on ` +\n `\"fill\" mode with the \\`fill\\` attribute.`);\n }\n}\n/**\n * Verifies that width and height are not set. Used in fill mode, where those attributes don't make\n * sense.\n */\nfunction assertEmptyWidthAndHeight(dir) {\n if (dir.width || dir.height) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} the attributes \\`height\\` and/or \\`width\\` are present ` +\n `along with the \\`fill\\` attribute. Because \\`fill\\` mode causes an image to fill its containing ` +\n `element, the size attributes have no effect and should be removed.`);\n }\n}\n/**\n * Verifies that the rendered image has a nonzero height. If the image is in fill mode, provides\n * guidance that this can be caused by the containing element's CSS position property.\n */\nfunction assertNonZeroRenderedHeight(dir, img, renderer) {\n const removeListenerFn = renderer.listen(img, 'load', () => {\n removeListenerFn();\n const renderedHeight = img.clientHeight;\n if (dir.fill && renderedHeight === 0) {\n console.warn(ɵformatRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} the height of the fill-mode image is zero. ` +\n `This is likely because the containing element does not have the CSS 'position' ` +\n `property set to one of the following: \"relative\", \"fixed\", or \"absolute\". ` +\n `To fix this problem, make sure the container element has the CSS 'position' ` +\n `property defined and the height of the element is not zero.`));\n }\n });\n}\n/**\n * Verifies that the `loading` attribute is set to a valid input &\n * is not used on priority images.\n */\nfunction assertValidLoadingInput(dir) {\n if (dir.loading && dir.priority) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} the \\`loading\\` attribute ` +\n `was used on an image that was marked \"priority\". ` +\n `Setting \\`loading\\` on priority images is not allowed ` +\n `because these images will always be eagerly loaded. ` +\n `To fix this, remove the “loading” attribute from the priority image.`);\n }\n const validInputs = ['auto', 'eager', 'lazy'];\n if (typeof dir.loading === 'string' && !validInputs.includes(dir.loading)) {\n throw new ɵRuntimeError(2952 /* RuntimeErrorCode.INVALID_INPUT */, `${imgDirectiveDetails(dir.ngSrc)} the \\`loading\\` attribute ` +\n `has an invalid value (\\`${dir.loading}\\`). ` +\n `To fix this, provide a valid value (\"lazy\", \"eager\", or \"auto\").`);\n }\n}\n/**\n * Warns if NOT using a loader (falling back to the generic loader) and\n * the image appears to be hosted on one of the image CDNs for which\n * we do have a built-in image loader. Suggests switching to the\n * built-in loader.\n *\n * @param ngSrc Value of the ngSrc attribute\n * @param imageLoader ImageLoader provided\n */\nfunction assertNotMissingBuiltInLoader(ngSrc, imageLoader) {\n if (imageLoader === noopImageLoader) {\n let builtInLoaderName = '';\n for (const loader of BUILT_IN_LOADERS) {\n if (loader.testUrl(ngSrc)) {\n builtInLoaderName = loader.name;\n break;\n }\n }\n if (builtInLoaderName) {\n console.warn(ɵformatRuntimeError(2962 /* RuntimeErrorCode.MISSING_BUILTIN_LOADER */, `NgOptimizedImage: It looks like your images may be hosted on the ` +\n `${builtInLoaderName} CDN, but your app is not using Angular's ` +\n `built-in loader for that CDN. We recommend switching to use ` +\n `the built-in by calling \\`provide${builtInLoaderName}Loader()\\` ` +\n `in your \\`providers\\` and passing it your instance's base URL. ` +\n `If you don't want to use the built-in loader, define a custom ` +\n `loader function using IMAGE_LOADER to silence this warning.`));\n }\n }\n}\n/**\n * Warns if ngSrcset is present and no loader is configured (i.e. the default one is being used).\n */\nfunction assertNoNgSrcsetWithoutLoader(dir, imageLoader) {\n if (dir.ngSrcset && imageLoader === noopImageLoader) {\n console.warn(ɵformatRuntimeError(2963 /* RuntimeErrorCode.MISSING_NECESSARY_LOADER */, `${imgDirectiveDetails(dir.ngSrc)} the \\`ngSrcset\\` attribute is present but ` +\n `no image loader is configured (i.e. the default one is being used), ` +\n `which would result in the same image being used for all configured sizes. ` +\n `To fix this, provide a loader or remove the \\`ngSrcset\\` attribute from the image.`));\n }\n}\n/**\n * Warns if loaderParams is present and no loader is configured (i.e. the default one is being\n * used).\n */\nfunction assertNoLoaderParamsWithoutLoader(dir, imageLoader) {\n if (dir.loaderParams && imageLoader === noopImageLoader) {\n console.warn(ɵformatRuntimeError(2963 /* RuntimeErrorCode.MISSING_NECESSARY_LOADER */, `${imgDirectiveDetails(dir.ngSrc)} the \\`loaderParams\\` attribute is present but ` +\n `no image loader is configured (i.e. the default one is being used), ` +\n `which means that the loaderParams data will not be consumed and will not affect the URL. ` +\n `To fix this, provide a custom loader or remove the \\`loaderParams\\` attribute from the image.`));\n }\n}\n\n// These exports represent the set of symbols exposed as a public API.\n\n/**\n * @module\n * @description\n * Entry point for all public APIs of the common package.\n */\n\n/**\n * @module\n * @description\n * Entry point for all public APIs of this package.\n */\n// This file only reexports content of the `src` folder. Keep it that way.\n\n// This file is not used to build this module. It is only used during editing\n\n/**\n * Generated bundle index. Do not edit.\n */\n\nexport { APP_BASE_HREF, AsyncPipe, BrowserPlatformLocation, CommonModule, CurrencyPipe, DATE_PIPE_DEFAULT_OPTIONS, DATE_PIPE_DEFAULT_TIMEZONE, DOCUMENT, DatePipe, DecimalPipe, FormStyle, FormatWidth, HashLocationStrategy, I18nPluralPipe, I18nSelectPipe, IMAGE_CONFIG, IMAGE_LOADER, JsonPipe, KeyValuePipe, LOCATION_INITIALIZED, Location, LocationStrategy, LowerCasePipe, NgClass, NgComponentOutlet, NgForOf as NgFor, NgForOf, NgForOfContext, NgIf, NgIfContext, NgLocaleLocalization, NgLocalization, NgOptimizedImage, NgPlural, NgPluralCase, NgStyle, NgSwitch, NgSwitchCase, NgSwitchDefault, NgTemplateOutlet, NumberFormatStyle, NumberSymbol, PRECONNECT_CHECK_BLOCKLIST, PathLocationStrategy, PercentPipe, PlatformLocation, Plural, SlicePipe, TitleCasePipe, TranslationWidth, UpperCasePipe, VERSION, ViewportScroller, WeekDay, XhrFactory, formatCurrency, formatDate, formatNumber, formatPercent, getCurrencySymbol, getLocaleCurrencyCode, getLocaleCurrencyName, getLocaleCurrencySymbol, getLocaleDateFormat, getLocaleDateTimeFormat, getLocaleDayNames, getLocaleDayPeriods, getLocaleDirection, getLocaleEraNames, getLocaleExtraDayPeriodRules, getLocaleExtraDayPeriods, getLocaleFirstDayOfWeek, getLocaleId, getLocaleMonthNames, getLocaleNumberFormat, getLocaleNumberSymbol, getLocalePluralCase, getLocaleTimeFormat, getLocaleWeekEndRange, getNumberOfCurrencyDigits, isPlatformBrowser, isPlatformServer, isPlatformWorkerApp, isPlatformWorkerUi, provideCloudflareLoader, provideCloudinaryLoader, provideImageKitLoader, provideImgixLoader, registerLocaleData, DomAdapter as ɵDomAdapter, NullViewportScroller as ɵNullViewportScroller, PLATFORM_BROWSER_ID as ɵPLATFORM_BROWSER_ID, PLATFORM_SERVER_ID as ɵPLATFORM_SERVER_ID, PLATFORM_WORKER_APP_ID as ɵPLATFORM_WORKER_APP_ID, PLATFORM_WORKER_UI_ID as ɵPLATFORM_WORKER_UI_ID, getDOM as ɵgetDOM, parseCookieValue as ɵparseCookieValue, setRootDomAdapter as ɵsetRootDomAdapter };\n","/**\n * @license Angular v16.0.1\n * (c) 2010-2022 Google LLC. https://angular.io/\n * License: MIT\n */\n\nimport * as i0 from '@angular/core';\nimport { Injectable, InjectionToken, inject, Inject, PLATFORM_ID, makeEnvironmentProviders, NgModule, TransferState, makeStateKey, ɵENABLED_SSR_FEATURES, APP_BOOTSTRAP_LISTENER, ApplicationRef, ɵInitialRenderPendingTasks } from '@angular/core';\nimport { of, Observable, from } from 'rxjs';\nimport { concatMap, filter, map, switchMap, tap, first } from 'rxjs/operators';\nimport * as i1 from '@angular/common';\nimport { DOCUMENT, ɵparseCookieValue } from '@angular/common';\n\n/**\n * Transforms an `HttpRequest` into a stream of `HttpEvent`s, one of which will likely be a\n * `HttpResponse`.\n *\n * `HttpHandler` is injectable. When injected, the handler instance dispatches requests to the\n * first interceptor in the chain, which dispatches to the second, etc, eventually reaching the\n * `HttpBackend`.\n *\n * In an `HttpInterceptor`, the `HttpHandler` parameter is the next interceptor in the chain.\n *\n * @publicApi\n */\nclass HttpHandler {\n}\n/**\n * A final `HttpHandler` which will dispatch the request via browser HTTP APIs to a backend.\n *\n * Interceptors sit between the `HttpClient` interface and the `HttpBackend`.\n *\n * When injected, `HttpBackend` dispatches requests directly to the backend, without going\n * through the interceptor chain.\n *\n * @publicApi\n */\nclass HttpBackend {\n}\n\n/**\n * Represents the header configuration options for an HTTP request.\n * Instances are immutable. Modifying methods return a cloned\n * instance with the change. The original object is never changed.\n *\n * @publicApi\n */\nclass HttpHeaders {\n /** Constructs a new HTTP header object with the given values.*/\n constructor(headers) {\n /**\n * Internal map of lowercased header names to the normalized\n * form of the name (the form seen first).\n */\n this.normalizedNames = new Map();\n /**\n * Queued updates to be materialized the next initialization.\n */\n this.lazyUpdate = null;\n if (!headers) {\n this.headers = new Map();\n }\n else if (typeof headers === 'string') {\n this.lazyInit = () => {\n this.headers = new Map();\n headers.split('\\n').forEach(line => {\n const index = line.indexOf(':');\n if (index > 0) {\n const name = line.slice(0, index);\n const key = name.toLowerCase();\n const value = line.slice(index + 1).trim();\n this.maybeSetNormalizedName(name, key);\n if (this.headers.has(key)) {\n this.headers.get(key).push(value);\n }\n else {\n this.headers.set(key, [value]);\n }\n }\n });\n };\n }\n else {\n this.lazyInit = () => {\n if (typeof ngDevMode === 'undefined' || ngDevMode) {\n assertValidHeaders(headers);\n }\n this.headers = new Map();\n Object.entries(headers).forEach(([name, values]) => {\n let headerValues;\n if (typeof values === 'string') {\n headerValues = [values];\n }\n else if (typeof values === 'number') {\n headerValues = [values.toString()];\n }\n else {\n headerValues = values.map((value) => value.toString());\n }\n if (headerValues.length > 0) {\n const key = name.toLowerCase();\n this.headers.set(key, headerValues);\n this.maybeSetNormalizedName(name, key);\n }\n });\n };\n }\n }\n /**\n * Checks for existence of a given header.\n *\n * @param name The header name to check for existence.\n *\n * @returns True if the header exists, false otherwise.\n */\n has(name) {\n this.init();\n return this.headers.has(name.toLowerCase());\n }\n /**\n * Retrieves the first value of a given header.\n *\n * @param name The header name.\n *\n * @returns The value string if the header exists, null otherwise\n */\n get(name) {\n this.init();\n const values = this.headers.get(name.toLowerCase());\n return values && values.length > 0 ? values[0] : null;\n }\n /**\n * Retrieves the names of the headers.\n *\n * @returns A list of header names.\n */\n keys() {\n this.init();\n return Array.from(this.normalizedNames.values());\n }\n /**\n * Retrieves a list of values for a given header.\n *\n * @param name The header name from which to retrieve values.\n *\n * @returns A string of values if the header exists, null otherwise.\n */\n getAll(name) {\n this.init();\n return this.headers.get(name.toLowerCase()) || null;\n }\n /**\n * Appends a new value to the existing set of values for a header\n * and returns them in a clone of the original instance.\n *\n * @param name The header name for which to append the values.\n * @param value The value to append.\n *\n * @returns A clone of the HTTP headers object with the value appended to the given header.\n */\n append(name, value) {\n return this.clone({ name, value, op: 'a' });\n }\n /**\n * Sets or modifies a value for a given header in a clone of the original instance.\n * If the header already exists, its value is replaced with the given value\n * in the returned object.\n *\n * @param name The header name.\n * @param value The value or values to set or override for the given header.\n *\n * @returns A clone of the HTTP headers object with the newly set header value.\n */\n set(name, value) {\n return this.clone({ name, value, op: 's' });\n }\n /**\n * Deletes values for a given header in a clone of the original instance.\n *\n * @param name The header name.\n * @param value The value or values to delete for the given header.\n *\n * @returns A clone of the HTTP headers object with the given value deleted.\n */\n delete(name, value) {\n return this.clone({ name, value, op: 'd' });\n }\n maybeSetNormalizedName(name, lcName) {\n if (!this.normalizedNames.has(lcName)) {\n this.normalizedNames.set(lcName, name);\n }\n }\n init() {\n if (!!this.lazyInit) {\n if (this.lazyInit instanceof HttpHeaders) {\n this.copyFrom(this.lazyInit);\n }\n else {\n this.lazyInit();\n }\n this.lazyInit = null;\n if (!!this.lazyUpdate) {\n this.lazyUpdate.forEach(update => this.applyUpdate(update));\n this.lazyUpdate = null;\n }\n }\n }\n copyFrom(other) {\n other.init();\n Array.from(other.headers.keys()).forEach(key => {\n this.headers.set(key, other.headers.get(key));\n this.normalizedNames.set(key, other.normalizedNames.get(key));\n });\n }\n clone(update) {\n const clone = new HttpHeaders();\n clone.lazyInit =\n (!!this.lazyInit && this.lazyInit instanceof HttpHeaders) ? this.lazyInit : this;\n clone.lazyUpdate = (this.lazyUpdate || []).concat([update]);\n return clone;\n }\n applyUpdate(update) {\n const key = update.name.toLowerCase();\n switch (update.op) {\n case 'a':\n case 's':\n let value = update.value;\n if (typeof value === 'string') {\n value = [value];\n }\n if (value.length === 0) {\n return;\n }\n this.maybeSetNormalizedName(update.name, key);\n const base = (update.op === 'a' ? this.headers.get(key) : undefined) || [];\n base.push(...value);\n this.headers.set(key, base);\n break;\n case 'd':\n const toDelete = update.value;\n if (!toDelete) {\n this.headers.delete(key);\n this.normalizedNames.delete(key);\n }\n else {\n let existing = this.headers.get(key);\n if (!existing) {\n return;\n }\n existing = existing.filter(value => toDelete.indexOf(value) === -1);\n if (existing.length === 0) {\n this.headers.delete(key);\n this.normalizedNames.delete(key);\n }\n else {\n this.headers.set(key, existing);\n }\n }\n break;\n }\n }\n /**\n * @internal\n */\n forEach(fn) {\n this.init();\n Array.from(this.normalizedNames.keys())\n .forEach(key => fn(this.normalizedNames.get(key), this.headers.get(key)));\n }\n}\n/**\n * Verifies that the headers object has the right shape: the values\n * must be either strings, numbers or arrays. Throws an error if an invalid\n * header value is present.\n */\nfunction assertValidHeaders(headers) {\n for (const [key, value] of Object.entries(headers)) {\n if (!(typeof value === 'string' || typeof value === 'number') && !Array.isArray(value)) {\n throw new Error(`Unexpected value of the \\`${key}\\` header provided. ` +\n `Expecting either a string, a number or an array, but got: \\`${value}\\`.`);\n }\n }\n}\n\n/**\n * Provides encoding and decoding of URL parameter and query-string values.\n *\n * Serializes and parses URL parameter keys and values to encode and decode them.\n * If you pass URL query parameters without encoding,\n * the query parameters can be misinterpreted at the receiving end.\n *\n *\n * @publicApi\n */\nclass HttpUrlEncodingCodec {\n /**\n * Encodes a key name for a URL parameter or query-string.\n * @param key The key name.\n * @returns The encoded key name.\n */\n encodeKey(key) {\n return standardEncoding(key);\n }\n /**\n * Encodes the value of a URL parameter or query-string.\n * @param value The value.\n * @returns The encoded value.\n */\n encodeValue(value) {\n return standardEncoding(value);\n }\n /**\n * Decodes an encoded URL parameter or query-string key.\n * @param key The encoded key name.\n * @returns The decoded key name.\n */\n decodeKey(key) {\n return decodeURIComponent(key);\n }\n /**\n * Decodes an encoded URL parameter or query-string value.\n * @param value The encoded value.\n * @returns The decoded value.\n */\n decodeValue(value) {\n return decodeURIComponent(value);\n }\n}\nfunction paramParser(rawParams, codec) {\n const map = new Map();\n if (rawParams.length > 0) {\n // The `window.location.search` can be used while creating an instance of the `HttpParams` class\n // (e.g. `new HttpParams({ fromString: window.location.search })`). The `window.location.search`\n // may start with the `?` char, so we strip it if it's present.\n const params = rawParams.replace(/^\\?/, '').split('&');\n params.forEach((param) => {\n const eqIdx = param.indexOf('=');\n const [key, val] = eqIdx == -1 ?\n [codec.decodeKey(param), ''] :\n [codec.decodeKey(param.slice(0, eqIdx)), codec.decodeValue(param.slice(eqIdx + 1))];\n const list = map.get(key) || [];\n list.push(val);\n map.set(key, list);\n });\n }\n return map;\n}\n/**\n * Encode input string with standard encodeURIComponent and then un-encode specific characters.\n */\nconst STANDARD_ENCODING_REGEX = /%(\\d[a-f0-9])/gi;\nconst STANDARD_ENCODING_REPLACEMENTS = {\n '40': '@',\n '3A': ':',\n '24': '$',\n '2C': ',',\n '3B': ';',\n '3D': '=',\n '3F': '?',\n '2F': '/',\n};\nfunction standardEncoding(v) {\n return encodeURIComponent(v).replace(STANDARD_ENCODING_REGEX, (s, t) => STANDARD_ENCODING_REPLACEMENTS[t] ?? s);\n}\nfunction valueToString(value) {\n return `${value}`;\n}\n/**\n * An HTTP request/response body that represents serialized parameters,\n * per the MIME type `application/x-www-form-urlencoded`.\n *\n * This class is immutable; all mutation operations return a new instance.\n *\n * @publicApi\n */\nclass HttpParams {\n constructor(options = {}) {\n this.updates = null;\n this.cloneFrom = null;\n this.encoder = options.encoder || new HttpUrlEncodingCodec();\n if (!!options.fromString) {\n if (!!options.fromObject) {\n throw new Error(`Cannot specify both fromString and fromObject.`);\n }\n this.map = paramParser(options.fromString, this.encoder);\n }\n else if (!!options.fromObject) {\n this.map = new Map();\n Object.keys(options.fromObject).forEach(key => {\n const value = options.fromObject[key];\n // convert the values to strings\n const values = Array.isArray(value) ? value.map(valueToString) : [valueToString(value)];\n this.map.set(key, values);\n });\n }\n else {\n this.map = null;\n }\n }\n /**\n * Reports whether the body includes one or more values for a given parameter.\n * @param param The parameter name.\n * @returns True if the parameter has one or more values,\n * false if it has no value or is not present.\n */\n has(param) {\n this.init();\n return this.map.has(param);\n }\n /**\n * Retrieves the first value for a parameter.\n * @param param The parameter name.\n * @returns The first value of the given parameter,\n * or `null` if the parameter is not present.\n */\n get(param) {\n this.init();\n const res = this.map.get(param);\n return !!res ? res[0] : null;\n }\n /**\n * Retrieves all values for a parameter.\n * @param param The parameter name.\n * @returns All values in a string array,\n * or `null` if the parameter not present.\n */\n getAll(param) {\n this.init();\n return this.map.get(param) || null;\n }\n /**\n * Retrieves all the parameters for this body.\n * @returns The parameter names in a string array.\n */\n keys() {\n this.init();\n return Array.from(this.map.keys());\n }\n /**\n * Appends a new value to existing values for a parameter.\n * @param param The parameter name.\n * @param value The new value to add.\n * @return A new body with the appended value.\n */\n append(param, value) {\n return this.clone({ param, value, op: 'a' });\n }\n /**\n * Constructs a new body with appended values for the given parameter name.\n * @param params parameters and values\n * @return A new body with the new value.\n */\n appendAll(params) {\n const updates = [];\n Object.keys(params).forEach(param => {\n const value = params[param];\n if (Array.isArray(value)) {\n value.forEach(_value => {\n updates.push({ param, value: _value, op: 'a' });\n });\n }\n else {\n updates.push({ param, value: value, op: 'a' });\n }\n });\n return this.clone(updates);\n }\n /**\n * Replaces the value for a parameter.\n * @param param The parameter name.\n * @param value The new value.\n * @return A new body with the new value.\n */\n set(param, value) {\n return this.clone({ param, value, op: 's' });\n }\n /**\n * Removes a given value or all values from a parameter.\n * @param param The parameter name.\n * @param value The value to remove, if provided.\n * @return A new body with the given value removed, or with all values\n * removed if no value is specified.\n */\n delete(param, value) {\n return this.clone({ param, value, op: 'd' });\n }\n /**\n * Serializes the body to an encoded string, where key-value pairs (separated by `=`) are\n * separated by `&`s.\n */\n toString() {\n this.init();\n return this.keys()\n .map(key => {\n const eKey = this.encoder.encodeKey(key);\n // `a: ['1']` produces `'a=1'`\n // `b: []` produces `''`\n // `c: ['1', '2']` produces `'c=1&c=2'`\n return this.map.get(key).map(value => eKey + '=' + this.encoder.encodeValue(value))\n .join('&');\n })\n // filter out empty values because `b: []` produces `''`\n // which results in `a=1&&c=1&c=2` instead of `a=1&c=1&c=2` if we don't\n .filter(param => param !== '')\n .join('&');\n }\n clone(update) {\n const clone = new HttpParams({ encoder: this.encoder });\n clone.cloneFrom = this.cloneFrom || this;\n clone.updates = (this.updates || []).concat(update);\n return clone;\n }\n init() {\n if (this.map === null) {\n this.map = new Map();\n }\n if (this.cloneFrom !== null) {\n this.cloneFrom.init();\n this.cloneFrom.keys().forEach(key => this.map.set(key, this.cloneFrom.map.get(key)));\n this.updates.forEach(update => {\n switch (update.op) {\n case 'a':\n case 's':\n const base = (update.op === 'a' ? this.map.get(update.param) : undefined) || [];\n base.push(valueToString(update.value));\n this.map.set(update.param, base);\n break;\n case 'd':\n if (update.value !== undefined) {\n let base = this.map.get(update.param) || [];\n const idx = base.indexOf(valueToString(update.value));\n if (idx !== -1) {\n base.splice(idx, 1);\n }\n if (base.length > 0) {\n this.map.set(update.param, base);\n }\n else {\n this.map.delete(update.param);\n }\n }\n else {\n this.map.delete(update.param);\n break;\n }\n }\n });\n this.cloneFrom = this.updates = null;\n }\n }\n}\n\n/**\n * A token used to manipulate and access values stored in `HttpContext`.\n *\n * @publicApi\n */\nclass HttpContextToken {\n constructor(defaultValue) {\n this.defaultValue = defaultValue;\n }\n}\n/**\n * Http context stores arbitrary user defined values and ensures type safety without\n * actually knowing the types. It is backed by a `Map` and guarantees that keys do not clash.\n *\n * This context is mutable and is shared between cloned requests unless explicitly specified.\n *\n * @usageNotes\n *\n * ### Usage Example\n *\n * ```typescript\n * // inside cache.interceptors.ts\n * export const IS_CACHE_ENABLED = new HttpContextToken(() => false);\n *\n * export class CacheInterceptor implements HttpInterceptor {\n *\n * intercept(req: HttpRequest, delegate: HttpHandler): Observable> {\n * if (req.context.get(IS_CACHE_ENABLED) === true) {\n * return ...;\n * }\n * return delegate.handle(req);\n * }\n * }\n *\n * // inside a service\n *\n * this.httpClient.get('/api/weather', {\n * context: new HttpContext().set(IS_CACHE_ENABLED, true)\n * }).subscribe(...);\n * ```\n *\n * @publicApi\n */\nclass HttpContext {\n constructor() {\n this.map = new Map();\n }\n /**\n * Store a value in the context. If a value is already present it will be overwritten.\n *\n * @param token The reference to an instance of `HttpContextToken`.\n * @param value The value to store.\n *\n * @returns A reference to itself for easy chaining.\n */\n set(token, value) {\n this.map.set(token, value);\n return this;\n }\n /**\n * Retrieve the value associated with the given token.\n *\n * @param token The reference to an instance of `HttpContextToken`.\n *\n * @returns The stored value or default if one is defined.\n */\n get(token) {\n if (!this.map.has(token)) {\n this.map.set(token, token.defaultValue());\n }\n return this.map.get(token);\n }\n /**\n * Delete the value associated with the given token.\n *\n * @param token The reference to an instance of `HttpContextToken`.\n *\n * @returns A reference to itself for easy chaining.\n */\n delete(token) {\n this.map.delete(token);\n return this;\n }\n /**\n * Checks for existence of a given token.\n *\n * @param token The reference to an instance of `HttpContextToken`.\n *\n * @returns True if the token exists, false otherwise.\n */\n has(token) {\n return this.map.has(token);\n }\n /**\n * @returns a list of tokens currently stored in the context.\n */\n keys() {\n return this.map.keys();\n }\n}\n\n/**\n * Determine whether the given HTTP method may include a body.\n */\nfunction mightHaveBody(method) {\n switch (method) {\n case 'DELETE':\n case 'GET':\n case 'HEAD':\n case 'OPTIONS':\n case 'JSONP':\n return false;\n default:\n return true;\n }\n}\n/**\n * Safely assert whether the given value is an ArrayBuffer.\n *\n * In some execution environments ArrayBuffer is not defined.\n */\nfunction isArrayBuffer(value) {\n return typeof ArrayBuffer !== 'undefined' && value instanceof ArrayBuffer;\n}\n/**\n * Safely assert whether the given value is a Blob.\n *\n * In some execution environments Blob is not defined.\n */\nfunction isBlob(value) {\n return typeof Blob !== 'undefined' && value instanceof Blob;\n}\n/**\n * Safely assert whether the given value is a FormData instance.\n *\n * In some execution environments FormData is not defined.\n */\nfunction isFormData(value) {\n return typeof FormData !== 'undefined' && value instanceof FormData;\n}\n/**\n * Safely assert whether the given value is a URLSearchParams instance.\n *\n * In some execution environments URLSearchParams is not defined.\n */\nfunction isUrlSearchParams(value) {\n return typeof URLSearchParams !== 'undefined' && value instanceof URLSearchParams;\n}\n/**\n * An outgoing HTTP request with an optional typed body.\n *\n * `HttpRequest` represents an outgoing request, including URL, method,\n * headers, body, and other request configuration options. Instances should be\n * assumed to be immutable. To modify a `HttpRequest`, the `clone`\n * method should be used.\n *\n * @publicApi\n */\nclass HttpRequest {\n constructor(method, url, third, fourth) {\n this.url = url;\n /**\n * The request body, or `null` if one isn't set.\n *\n * Bodies are not enforced to be immutable, as they can include a reference to any\n * user-defined data type. However, interceptors should take care to preserve\n * idempotence by treating them as such.\n */\n this.body = null;\n /**\n * Whether this request should be made in a way that exposes progress events.\n *\n * Progress events are expensive (change detection runs on each event) and so\n * they should only be requested if the consumer intends to monitor them.\n */\n this.reportProgress = false;\n /**\n * Whether this request should be sent with outgoing credentials (cookies).\n */\n this.withCredentials = false;\n /**\n * The expected response type of the server.\n *\n * This is used to parse the response appropriately before returning it to\n * the requestee.\n */\n this.responseType = 'json';\n this.method = method.toUpperCase();\n // Next, need to figure out which argument holds the HttpRequestInit\n // options, if any.\n let options;\n // Check whether a body argument is expected. The only valid way to omit\n // the body argument is to use a known no-body method like GET.\n if (mightHaveBody(this.method) || !!fourth) {\n // Body is the third argument, options are the fourth.\n this.body = (third !== undefined) ? third : null;\n options = fourth;\n }\n else {\n // No body required, options are the third argument. The body stays null.\n options = third;\n }\n // If options have been passed, interpret them.\n if (options) {\n // Normalize reportProgress and withCredentials.\n this.reportProgress = !!options.reportProgress;\n this.withCredentials = !!options.withCredentials;\n // Override default response type of 'json' if one is provided.\n if (!!options.responseType) {\n this.responseType = options.responseType;\n }\n // Override headers if they're provided.\n if (!!options.headers) {\n this.headers = options.headers;\n }\n if (!!options.context) {\n this.context = options.context;\n }\n if (!!options.params) {\n this.params = options.params;\n }\n }\n // If no headers have been passed in, construct a new HttpHeaders instance.\n if (!this.headers) {\n this.headers = new HttpHeaders();\n }\n // If no context have been passed in, construct a new HttpContext instance.\n if (!this.context) {\n this.context = new HttpContext();\n }\n // If no parameters have been passed in, construct a new HttpUrlEncodedParams instance.\n if (!this.params) {\n this.params = new HttpParams();\n this.urlWithParams = url;\n }\n else {\n // Encode the parameters to a string in preparation for inclusion in the URL.\n const params = this.params.toString();\n if (params.length === 0) {\n // No parameters, the visible URL is just the URL given at creation time.\n this.urlWithParams = url;\n }\n else {\n // Does the URL already have query parameters? Look for '?'.\n const qIdx = url.indexOf('?');\n // There are 3 cases to handle:\n // 1) No existing parameters -> append '?' followed by params.\n // 2) '?' exists and is followed by existing query string ->\n // append '&' followed by params.\n // 3) '?' exists at the end of the url -> append params directly.\n // This basically amounts to determining the character, if any, with\n // which to join the URL and parameters.\n const sep = qIdx === -1 ? '?' : (qIdx < url.length - 1 ? '&' : '');\n this.urlWithParams = url + sep + params;\n }\n }\n }\n /**\n * Transform the free-form body into a serialized format suitable for\n * transmission to the server.\n */\n serializeBody() {\n // If no body is present, no need to serialize it.\n if (this.body === null) {\n return null;\n }\n // Check whether the body is already in a serialized form. If so,\n // it can just be returned directly.\n if (isArrayBuffer(this.body) || isBlob(this.body) || isFormData(this.body) ||\n isUrlSearchParams(this.body) || typeof this.body === 'string') {\n return this.body;\n }\n // Check whether the body is an instance of HttpUrlEncodedParams.\n if (this.body instanceof HttpParams) {\n return this.body.toString();\n }\n // Check whether the body is an object or array, and serialize with JSON if so.\n if (typeof this.body === 'object' || typeof this.body === 'boolean' ||\n Array.isArray(this.body)) {\n return JSON.stringify(this.body);\n }\n // Fall back on toString() for everything else.\n return this.body.toString();\n }\n /**\n * Examine the body and attempt to infer an appropriate MIME type\n * for it.\n *\n * If no such type can be inferred, this method will return `null`.\n */\n detectContentTypeHeader() {\n // An empty body has no content type.\n if (this.body === null) {\n return null;\n }\n // FormData bodies rely on the browser's content type assignment.\n if (isFormData(this.body)) {\n return null;\n }\n // Blobs usually have their own content type. If it doesn't, then\n // no type can be inferred.\n if (isBlob(this.body)) {\n return this.body.type || null;\n }\n // Array buffers have unknown contents and thus no type can be inferred.\n if (isArrayBuffer(this.body)) {\n return null;\n }\n // Technically, strings could be a form of JSON data, but it's safe enough\n // to assume they're plain strings.\n if (typeof this.body === 'string') {\n return 'text/plain';\n }\n // `HttpUrlEncodedParams` has its own content-type.\n if (this.body instanceof HttpParams) {\n return 'application/x-www-form-urlencoded;charset=UTF-8';\n }\n // Arrays, objects, boolean and numbers will be encoded as JSON.\n if (typeof this.body === 'object' || typeof this.body === 'number' ||\n typeof this.body === 'boolean') {\n return 'application/json';\n }\n // No type could be inferred.\n return null;\n }\n clone(update = {}) {\n // For method, url, and responseType, take the current value unless\n // it is overridden in the update hash.\n const method = update.method || this.method;\n const url = update.url || this.url;\n const responseType = update.responseType || this.responseType;\n // The body is somewhat special - a `null` value in update.body means\n // whatever current body is present is being overridden with an empty\n // body, whereas an `undefined` value in update.body implies no\n // override.\n const body = (update.body !== undefined) ? update.body : this.body;\n // Carefully handle the boolean options to differentiate between\n // `false` and `undefined` in the update args.\n const withCredentials = (update.withCredentials !== undefined) ? update.withCredentials : this.withCredentials;\n const reportProgress = (update.reportProgress !== undefined) ? update.reportProgress : this.reportProgress;\n // Headers and params may be appended to if `setHeaders` or\n // `setParams` are used.\n let headers = update.headers || this.headers;\n let params = update.params || this.params;\n // Pass on context if needed\n const context = update.context ?? this.context;\n // Check whether the caller has asked to add headers.\n if (update.setHeaders !== undefined) {\n // Set every requested header.\n headers =\n Object.keys(update.setHeaders)\n .reduce((headers, name) => headers.set(name, update.setHeaders[name]), headers);\n }\n // Check whether the caller has asked to set params.\n if (update.setParams) {\n // Set every requested param.\n params = Object.keys(update.setParams)\n .reduce((params, param) => params.set(param, update.setParams[param]), params);\n }\n // Finally, construct the new HttpRequest using the pieces from above.\n return new HttpRequest(method, url, body, {\n params,\n headers,\n context,\n reportProgress,\n responseType,\n withCredentials,\n });\n }\n}\n\n/**\n * Type enumeration for the different kinds of `HttpEvent`.\n *\n * @publicApi\n */\nvar HttpEventType;\n(function (HttpEventType) {\n /**\n * The request was sent out over the wire.\n */\n HttpEventType[HttpEventType[\"Sent\"] = 0] = \"Sent\";\n /**\n * An upload progress event was received.\n */\n HttpEventType[HttpEventType[\"UploadProgress\"] = 1] = \"UploadProgress\";\n /**\n * The response status code and headers were received.\n */\n HttpEventType[HttpEventType[\"ResponseHeader\"] = 2] = \"ResponseHeader\";\n /**\n * A download progress event was received.\n */\n HttpEventType[HttpEventType[\"DownloadProgress\"] = 3] = \"DownloadProgress\";\n /**\n * The full response including the body was received.\n */\n HttpEventType[HttpEventType[\"Response\"] = 4] = \"Response\";\n /**\n * A custom event from an interceptor or a backend.\n */\n HttpEventType[HttpEventType[\"User\"] = 5] = \"User\";\n})(HttpEventType || (HttpEventType = {}));\n/**\n * Base class for both `HttpResponse` and `HttpHeaderResponse`.\n *\n * @publicApi\n */\nclass HttpResponseBase {\n /**\n * Super-constructor for all responses.\n *\n * The single parameter accepted is an initialization hash. Any properties\n * of the response passed there will override the default values.\n */\n constructor(init, defaultStatus = 200 /* HttpStatusCode.Ok */, defaultStatusText = 'OK') {\n // If the hash has values passed, use them to initialize the response.\n // Otherwise use the default values.\n this.headers = init.headers || new HttpHeaders();\n this.status = init.status !== undefined ? init.status : defaultStatus;\n this.statusText = init.statusText || defaultStatusText;\n this.url = init.url || null;\n // Cache the ok value to avoid defining a getter.\n this.ok = this.status >= 200 && this.status < 300;\n }\n}\n/**\n * A partial HTTP response which only includes the status and header data,\n * but no response body.\n *\n * `HttpHeaderResponse` is a `HttpEvent` available on the response\n * event stream, only when progress events are requested.\n *\n * @publicApi\n */\nclass HttpHeaderResponse extends HttpResponseBase {\n /**\n * Create a new `HttpHeaderResponse` with the given parameters.\n */\n constructor(init = {}) {\n super(init);\n this.type = HttpEventType.ResponseHeader;\n }\n /**\n * Copy this `HttpHeaderResponse`, overriding its contents with the\n * given parameter hash.\n */\n clone(update = {}) {\n // Perform a straightforward initialization of the new HttpHeaderResponse,\n // overriding the current parameters with new ones if given.\n return new HttpHeaderResponse({\n headers: update.headers || this.headers,\n status: update.status !== undefined ? update.status : this.status,\n statusText: update.statusText || this.statusText,\n url: update.url || this.url || undefined,\n });\n }\n}\n/**\n * A full HTTP response, including a typed response body (which may be `null`\n * if one was not returned).\n *\n * `HttpResponse` is a `HttpEvent` available on the response event\n * stream.\n *\n * @publicApi\n */\nclass HttpResponse extends HttpResponseBase {\n /**\n * Construct a new `HttpResponse`.\n */\n constructor(init = {}) {\n super(init);\n this.type = HttpEventType.Response;\n this.body = init.body !== undefined ? init.body : null;\n }\n clone(update = {}) {\n return new HttpResponse({\n body: (update.body !== undefined) ? update.body : this.body,\n headers: update.headers || this.headers,\n status: (update.status !== undefined) ? update.status : this.status,\n statusText: update.statusText || this.statusText,\n url: update.url || this.url || undefined,\n });\n }\n}\n/**\n * A response that represents an error or failure, either from a\n * non-successful HTTP status, an error while executing the request,\n * or some other failure which occurred during the parsing of the response.\n *\n * Any error returned on the `Observable` response stream will be\n * wrapped in an `HttpErrorResponse` to provide additional context about\n * the state of the HTTP layer when the error occurred. The error property\n * will contain either a wrapped Error object or the error response returned\n * from the server.\n *\n * @publicApi\n */\nclass HttpErrorResponse extends HttpResponseBase {\n constructor(init) {\n // Initialize with a default status of 0 / Unknown Error.\n super(init, 0, 'Unknown Error');\n this.name = 'HttpErrorResponse';\n /**\n * Errors are never okay, even when the status code is in the 2xx success range.\n */\n this.ok = false;\n // If the response was successful, then this was a parse error. Otherwise, it was\n // a protocol-level failure of some sort. Either the request failed in transit\n // or the server returned an unsuccessful status code.\n if (this.status >= 200 && this.status < 300) {\n this.message = `Http failure during parsing for ${init.url || '(unknown url)'}`;\n }\n else {\n this.message = `Http failure response for ${init.url || '(unknown url)'}: ${init.status} ${init.statusText}`;\n }\n this.error = init.error || null;\n }\n}\n\n/**\n * Constructs an instance of `HttpRequestOptions` from a source `HttpMethodOptions` and\n * the given `body`. This function clones the object and adds the body.\n *\n * Note that the `responseType` *options* value is a String that identifies the\n * single data type of the response.\n * A single overload version of the method handles each response type.\n * The value of `responseType` cannot be a union, as the combined signature could imply.\n *\n */\nfunction addBody(options, body) {\n return {\n body,\n headers: options.headers,\n context: options.context,\n observe: options.observe,\n params: options.params,\n reportProgress: options.reportProgress,\n responseType: options.responseType,\n withCredentials: options.withCredentials,\n };\n}\n/**\n * Performs HTTP requests.\n * This service is available as an injectable class, with methods to perform HTTP requests.\n * Each request method has multiple signatures, and the return type varies based on\n * the signature that is called (mainly the values of `observe` and `responseType`).\n *\n * Note that the `responseType` *options* value is a String that identifies the\n * single data type of the response.\n * A single overload version of the method handles each response type.\n * The value of `responseType` cannot be a union, as the combined signature could imply.\n\n *\n * @usageNotes\n * Sample HTTP requests for the [Tour of Heroes](/tutorial/tour-of-heroes/toh-pt0) application.\n *\n * ### HTTP Request Example\n *\n * ```\n * // GET heroes whose name contains search term\n * searchHeroes(term: string): observable{\n *\n * const params = new HttpParams({fromString: 'name=term'});\n * return this.httpClient.request('GET', this.heroesUrl, {responseType:'json', params});\n * }\n * ```\n *\n * Alternatively, the parameter string can be used without invoking HttpParams\n * by directly joining to the URL.\n * ```\n * this.httpClient.request('GET', this.heroesUrl + '?' + 'name=term', {responseType:'json'});\n * ```\n *\n *\n * ### JSONP Example\n * ```\n * requestJsonp(url, callback = 'callback') {\n * return this.httpClient.jsonp(this.heroesURL, callback);\n * }\n * ```\n *\n * ### PATCH Example\n * ```\n * // PATCH one of the heroes' name\n * patchHero (id: number, heroName: string): Observable<{}> {\n * const url = `${this.heroesUrl}/${id}`; // PATCH api/heroes/42\n * return this.httpClient.patch(url, {name: heroName}, httpOptions)\n * .pipe(catchError(this.handleError('patchHero')));\n * }\n * ```\n *\n * @see [HTTP Guide](guide/http)\n * @see [HTTP Request](api/common/http/HttpRequest)\n *\n * @publicApi\n */\nclass HttpClient {\n constructor(handler) {\n this.handler = handler;\n }\n /**\n * Constructs an observable for a generic HTTP request that, when subscribed,\n * fires the request through the chain of registered interceptors and on to the\n * server.\n *\n * You can pass an `HttpRequest` directly as the only parameter. In this case,\n * the call returns an observable of the raw `HttpEvent` stream.\n *\n * Alternatively you can pass an HTTP method as the first parameter,\n * a URL string as the second, and an options hash containing the request body as the third.\n * See `addBody()`. In this case, the specified `responseType` and `observe` options determine the\n * type of returned observable.\n * * The `responseType` value determines how a successful response body is parsed.\n * * If `responseType` is the default `json`, you can pass a type interface for the resulting\n * object as a type parameter to the call.\n *\n * The `observe` value determines the return type, according to what you are interested in\n * observing.\n * * An `observe` value of events returns an observable of the raw `HttpEvent` stream, including\n * progress events by default.\n * * An `observe` value of response returns an observable of `HttpResponse`,\n * where the `T` parameter depends on the `responseType` and any optionally provided type\n * parameter.\n * * An `observe` value of body returns an observable of `` with the same `T` body type.\n *\n */\n request(first, url, options = {}) {\n let req;\n // First, check whether the primary argument is an instance of `HttpRequest`.\n if (first instanceof HttpRequest) {\n // It is. The other arguments must be undefined (per the signatures) and can be\n // ignored.\n req = first;\n }\n else {\n // It's a string, so it represents a URL. Construct a request based on it,\n // and incorporate the remaining arguments (assuming `GET` unless a method is\n // provided.\n // Figure out the headers.\n let headers = undefined;\n if (options.headers instanceof HttpHeaders) {\n headers = options.headers;\n }\n else {\n headers = new HttpHeaders(options.headers);\n }\n // Sort out parameters.\n let params = undefined;\n if (!!options.params) {\n if (options.params instanceof HttpParams) {\n params = options.params;\n }\n else {\n params = new HttpParams({ fromObject: options.params });\n }\n }\n // Construct the request.\n req = new HttpRequest(first, url, (options.body !== undefined ? options.body : null), {\n headers,\n context: options.context,\n params,\n reportProgress: options.reportProgress,\n // By default, JSON is assumed to be returned for all calls.\n responseType: options.responseType || 'json',\n withCredentials: options.withCredentials,\n });\n }\n // Start with an Observable.of() the initial request, and run the handler (which\n // includes all interceptors) inside a concatMap(). This way, the handler runs\n // inside an Observable chain, which causes interceptors to be re-run on every\n // subscription (this also makes retries re-run the handler, including interceptors).\n const events$ = of(req).pipe(concatMap((req) => this.handler.handle(req)));\n // If coming via the API signature which accepts a previously constructed HttpRequest,\n // the only option is to get the event stream. Otherwise, return the event stream if\n // that is what was requested.\n if (first instanceof HttpRequest || options.observe === 'events') {\n return events$;\n }\n // The requested stream contains either the full response or the body. In either\n // case, the first step is to filter the event stream to extract a stream of\n // responses(s).\n const res$ = events$.pipe(filter((event) => event instanceof HttpResponse));\n // Decide which stream to return.\n switch (options.observe || 'body') {\n case 'body':\n // The requested stream is the body. Map the response stream to the response\n // body. This could be done more simply, but a misbehaving interceptor might\n // transform the response body into a different format and ignore the requested\n // responseType. Guard against this by validating that the response is of the\n // requested type.\n switch (req.responseType) {\n case 'arraybuffer':\n return res$.pipe(map((res) => {\n // Validate that the body is an ArrayBuffer.\n if (res.body !== null && !(res.body instanceof ArrayBuffer)) {\n throw new Error('Response is not an ArrayBuffer.');\n }\n return res.body;\n }));\n case 'blob':\n return res$.pipe(map((res) => {\n // Validate that the body is a Blob.\n if (res.body !== null && !(res.body instanceof Blob)) {\n throw new Error('Response is not a Blob.');\n }\n return res.body;\n }));\n case 'text':\n return res$.pipe(map((res) => {\n // Validate that the body is a string.\n if (res.body !== null && typeof res.body !== 'string') {\n throw new Error('Response is not a string.');\n }\n return res.body;\n }));\n case 'json':\n default:\n // No validation needed for JSON responses, as they can be of any type.\n return res$.pipe(map((res) => res.body));\n }\n case 'response':\n // The response stream was requested directly, so return it.\n return res$;\n default:\n // Guard against new future observe types being added.\n throw new Error(`Unreachable: unhandled observe type ${options.observe}}`);\n }\n }\n /**\n * Constructs an observable that, when subscribed, causes the configured\n * `DELETE` request to execute on the server. See the individual overloads for\n * details on the return type.\n *\n * @param url The endpoint URL.\n * @param options The HTTP options to send with the request.\n *\n */\n delete(url, options = {}) {\n return this.request('DELETE', url, options);\n }\n /**\n * Constructs an observable that, when subscribed, causes the configured\n * `GET` request to execute on the server. See the individual overloads for\n * details on the return type.\n */\n get(url, options = {}) {\n return this.request('GET', url, options);\n }\n /**\n * Constructs an observable that, when subscribed, causes the configured\n * `HEAD` request to execute on the server. The `HEAD` method returns\n * meta information about the resource without transferring the\n * resource itself. See the individual overloads for\n * details on the return type.\n */\n head(url, options = {}) {\n return this.request('HEAD', url, options);\n }\n /**\n * Constructs an `Observable` that, when subscribed, causes a request with the special method\n * `JSONP` to be dispatched via the interceptor pipeline.\n * The [JSONP pattern](https://en.wikipedia.org/wiki/JSONP) works around limitations of certain\n * API endpoints that don't support newer,\n * and preferable [CORS](https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS) protocol.\n * JSONP treats the endpoint API as a JavaScript file and tricks the browser to process the\n * requests even if the API endpoint is not located on the same domain (origin) as the client-side\n * application making the request.\n * The endpoint API must support JSONP callback for JSONP requests to work.\n * The resource API returns the JSON response wrapped in a callback function.\n * You can pass the callback function name as one of the query parameters.\n * Note that JSONP requests can only be used with `GET` requests.\n *\n * @param url The resource URL.\n * @param callbackParam The callback function name.\n *\n */\n jsonp(url, callbackParam) {\n return this.request('JSONP', url, {\n params: new HttpParams().append(callbackParam, 'JSONP_CALLBACK'),\n observe: 'body',\n responseType: 'json',\n });\n }\n /**\n * Constructs an `Observable` that, when subscribed, causes the configured\n * `OPTIONS` request to execute on the server. This method allows the client\n * to determine the supported HTTP methods and other capabilities of an endpoint,\n * without implying a resource action. See the individual overloads for\n * details on the return type.\n */\n options(url, options = {}) {\n return this.request('OPTIONS', url, options);\n }\n /**\n * Constructs an observable that, when subscribed, causes the configured\n * `PATCH` request to execute on the server. See the individual overloads for\n * details on the return type.\n */\n patch(url, body, options = {}) {\n return this.request('PATCH', url, addBody(options, body));\n }\n /**\n * Constructs an observable that, when subscribed, causes the configured\n * `POST` request to execute on the server. The server responds with the location of\n * the replaced resource. See the individual overloads for\n * details on the return type.\n */\n post(url, body, options = {}) {\n return this.request('POST', url, addBody(options, body));\n }\n /**\n * Constructs an observable that, when subscribed, causes the configured\n * `PUT` request to execute on the server. The `PUT` method replaces an existing resource\n * with a new set of values.\n * See the individual overloads for details on the return type.\n */\n put(url, body, options = {}) {\n return this.request('PUT', url, addBody(options, body));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HttpClient, deps: [{ token: HttpHandler }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HttpClient }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HttpClient, decorators: [{\n type: Injectable\n }], ctorParameters: function () { return [{ type: HttpHandler }]; } });\n\nfunction interceptorChainEndFn(req, finalHandlerFn) {\n return finalHandlerFn(req);\n}\n/**\n * Constructs a `ChainedInterceptorFn` which adapts a legacy `HttpInterceptor` to the\n * `ChainedInterceptorFn` interface.\n */\nfunction adaptLegacyInterceptorToChain(chainTailFn, interceptor) {\n return (initialRequest, finalHandlerFn) => interceptor.intercept(initialRequest, {\n handle: (downstreamRequest) => chainTailFn(downstreamRequest, finalHandlerFn),\n });\n}\n/**\n * Constructs a `ChainedInterceptorFn` which wraps and invokes a functional interceptor in the given\n * injector.\n */\nfunction chainedInterceptorFn(chainTailFn, interceptorFn, injector) {\n // clang-format off\n return (initialRequest, finalHandlerFn) => injector.runInContext(() => interceptorFn(initialRequest, downstreamRequest => chainTailFn(downstreamRequest, finalHandlerFn)));\n // clang-format on\n}\n/**\n * A multi-provider token that represents the array of registered\n * `HttpInterceptor` objects.\n *\n * @publicApi\n */\nconst HTTP_INTERCEPTORS = new InjectionToken(ngDevMode ? 'HTTP_INTERCEPTORS' : '');\n/**\n * A multi-provided token of `HttpInterceptorFn`s.\n */\nconst HTTP_INTERCEPTOR_FNS = new InjectionToken(ngDevMode ? 'HTTP_INTERCEPTOR_FNS' : '');\n/**\n * A multi-provided token of `HttpInterceptorFn`s that are only set in root.\n */\nconst HTTP_ROOT_INTERCEPTOR_FNS = new InjectionToken(ngDevMode ? 'HTTP_ROOT_INTERCEPTOR_FNS' : '');\n/**\n * Creates an `HttpInterceptorFn` which lazily initializes an interceptor chain from the legacy\n * class-based interceptors and runs the request through it.\n */\nfunction legacyInterceptorFnFactory() {\n let chain = null;\n return (req, handler) => {\n if (chain === null) {\n const interceptors = inject(HTTP_INTERCEPTORS, { optional: true }) ?? [];\n // Note: interceptors are wrapped right-to-left so that final execution order is\n // left-to-right. That is, if `interceptors` is the array `[a, b, c]`, we want to\n // produce a chain that is conceptually `c(b(a(end)))`, which we build from the inside\n // out.\n chain = interceptors.reduceRight(adaptLegacyInterceptorToChain, interceptorChainEndFn);\n }\n return chain(req, handler);\n };\n}\nclass HttpInterceptorHandler extends HttpHandler {\n constructor(backend, injector) {\n super();\n this.backend = backend;\n this.injector = injector;\n this.chain = null;\n }\n handle(initialRequest) {\n if (this.chain === null) {\n const dedupedInterceptorFns = Array.from(new Set([\n ...this.injector.get(HTTP_INTERCEPTOR_FNS),\n ...this.injector.get(HTTP_ROOT_INTERCEPTOR_FNS, []),\n ]));\n // Note: interceptors are wrapped right-to-left so that final execution order is\n // left-to-right. That is, if `dedupedInterceptorFns` is the array `[a, b, c]`, we want to\n // produce a chain that is conceptually `c(b(a(end)))`, which we build from the inside\n // out.\n this.chain = dedupedInterceptorFns.reduceRight((nextSequencedFn, interceptorFn) => chainedInterceptorFn(nextSequencedFn, interceptorFn, this.injector), interceptorChainEndFn);\n }\n return this.chain(initialRequest, downstreamRequest => this.backend.handle(downstreamRequest));\n }\n static { this.ɵfac = i0.ɵɵngDeclareFactory({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HttpInterceptorHandler, deps: [{ token: HttpBackend }, { token: i0.EnvironmentInjector }], target: i0.ɵɵFactoryTarget.Injectable }); }\n static { this.ɵprov = i0.ɵɵngDeclareInjectable({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HttpInterceptorHandler }); }\n}\ni0.ɵɵngDeclareClassMetadata({ minVersion: \"12.0.0\", version: \"16.0.1\", ngImport: i0, type: HttpInterceptorHandler, decorators: [{\n type: Injectable\n }], ctorParameters: function () { return [{ type: HttpBackend }, { type: i0.EnvironmentInjector }]; } });\n\n// Every request made through JSONP needs a callback name that's unique across the\n// whole page. Each request is assigned an id and the callback name is constructed\n// from that. The next id to be assigned is tracked in a global variable here that\n// is shared among all applications on the page.\nlet nextRequestId = 0;\n/**\n * When a pending